Remove compilation warning caused by currently not used
hci_df_set_conn_cte_tx_param function.
Code is sorrounded by #ifdef CONFIG_BT_CTLR_DF_CONN_CTE_RSP.
The CONFIG_BT_CTLR_DF_CONN_CTE_RSP is changed to be disabled
by default (until complete implementation of the feature is
provided).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Change dfe-ant-num propert name to dfe-antenna-num.
The change is conde to keep the same naming style
for all properies, like dfe-pdu-antenna property.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add initialization of GPIOs that are used for antenna switching.
GPIOs provided to DFE extension in Radio peripheral, to drive
antenna switching, should be initialized in GPIO peripheral beforehand.
The initialization is optional and may be disabled by Kconfig.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Antenna switching done by Radio with use of GPIOs provided in
PSEL.DFEGPIO registers. Registers were initialized once during
controller initialization.
At preparation of new radio event, Radio peripheral is powered
down and up to resset its registers. It is related with multi
protocol handling and possible leftovers in Radio registers.
Due to that, PSEL.DFEGPIO registers should be initialized
at the preparation of every event that will transmit
or receive CTE and run antenna switching.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Anternna switching should be disabled when CTE Rx is not supported
or disabled. Added missing dependency on BT_CTLR_DF_CTE_RX.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing declarations of functions that are compiled in when
CONFIG_BT_CTLR_ADV_EXT_PDU_EXTRA_DATA_MEMORY is selected
Add missing include of header file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix duplicate include of lll_test.c file under the
unsupported ISR profiling feature in OpenISA port.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use `#if defined(...)` instead of `#if IS_ENABLED(..)` when
conditional compilation of definitions in source code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit prepares supporting sdmmc on
stm32l4+ devices. When trying to compile the
sdmmc driver there is a compilation error
because `HAL_SDEx_DriveTransceiver_1_8V_Callback`
is not implemented. We solve this by compiling
also `sd_ex` in cube as this function is implemented
there as weak.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
We should verify that the buffer has sufficient data before attempting
to parse the SDU length field. If we get a too short packet just
disconnect the channel.
Fixes#32497
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix array overrun of client features bitset, where CF_BYTE_LAST was
incorrectly defined as 2 using module instead of divide.
Also fix additional bit-logic when number of bits would exceed a byte:
- Inner for loop iterates from 0 to number of bits on a single byte.
- Same bitmask used for all bytes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Don't auto-update the device name in the advertising data as that
would clear any other scan-response data set by the application.
Document the behavior of the advertise with device name option
and the need to update data by the application to make sure
advertising data does not get cleared.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix endianness issue in reading CPF descriptor not converting from
native endianess to little-endian on the 'unit' and 'description'
fields.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the definitions of UUID values instead of magic constants with
explanation in comment.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This makes cbprintf_nano.c much closer to the standard printf and
therefore more useful. The following are now implemented:
- right justification for everything (only for numbers previously)
- precision value for numbers, chars and strings
- width/precision passed as arguments with *
- "unlimited" padding length
- lower/uppercase hex output
- the #, + and ' ' flags are supported
And the code was heavily reworked to reduce its size as much as
possible to mitigate the size growth. Still, the binary resulting
from cbprintf_nano.c is now between 10% and 20% bigger depending on
the architecture. This is still far smaller than cbprintf_complete.c
which remains about twice as big on average even without FP support.
Many unit tests that were skipped with CONFIG_CBPRINTF_NANO are now
enabled, and a few more were added for good measure.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Check for associated Extended Advertising set to determine
whether Broadcast ISO Group instance has been already
created.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add association between extended advertising, periodic
advertising and broadcast ISO instance, so that attempts to
create and terminate BIG can detect error conditions.
Error conditions being, trying to create BIG without a valid
periodic advertising train, or terminating BIG without prior
creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ticker job is disabled inside radio events then all
advertising, scanning, and slave latency cancel ticker
operations will be deferred, requiring increased ticker
thread context operation queue count.
Relates to #32430.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Consistently use the internal BT_CTLR_ADV_SET value in the
controller's implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing offset_adjust filed to pdu_adv_sync_info.
Add handling of the field when sync_info is added to advertising PDU.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Avoid splitting lines when possible while keeping length below 100
chars. Some other minor style corrections.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The use of a single error variable for RX and TX operations has
shown the OpenThread code to be asserting in some conditions.
This commit splits tx_rx_result into rx_result and tx_result
to avoid such cases.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If the network interface is down when trying to send a message,
return -ENETDOWN as we cannot send a message in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the tertiary PDU and extended header length value after
the refactoring in the commit c8475b9a3e ("Bluetooth:
controller: ULL: enable TX of CTE with per. adv. PDU").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
net_buf_max_len() provides the maximum number of bytes which can be put
behind the data pointer. This provides a save alternative to using the
size field of the net_buf structure directly, which does not take the
reserved bytes (headroom) into account.
This commit also replaces the usage of the size field in places where
size got used directly. Code has not been adjusted when it is easy to
recognise that the buffer does not have any reserved bytes, which is the
case after allocation or reset. Same goes for the faulty usage by
net_pkt as exposed by the last commit and begin fixed by a separate
commit.
Even though it would be cleaner, I decided to not rename the size field
to e.g. __buf_size in order to keep the amount of code changes low.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The ASSERT order is backwards, where the shell->ctx is being accessed
before it is being checked as valid. Moving the check for the
shell->ctx to before the using it.
Signed-off-by: Dan Kalowsky <dkalowsky@amperecomputing.com>
Fix the order so that it reflects the actual initialization order,
rather than putting PRE_KERNEL initializations after APPLICATION.
Add SMP in the proper location.
Use the helper function to provide unique identifiers for "devices"
that don't have a device pointer (so don't have a name).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move USB MSC configuration to its own Kconfig file.
Align with other class designations and rename
mass_storage.c to msc.c
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rearrange the LL interface functions in the ll.h file to
group functions use by HCI separate from other buffer and
control flow related functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the controller version define into ll_feat.h file to
keep the version number and featureset bitmaps together.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added 3 utility functions :
- lwm2m_engine_update_period_service() which updates the period of a
given service.
- lwm2m_engine_update_period_min_observer() which updates the
min_period_sec for a given observe node.
- lwm2m_engine_update_period_max_observer() which updates the
max_period_sec for a given observe node.
Signed-off-by: Thomas LE ROUX <thomas.leroux@smile.fr>
