change pins for the test uart_async_api loopback because the old pins
pb10/pb11 are now used for the I2C loopback test.
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
This includes new overlays for boards supporting DMA, and one more test
to verify M0 boards both with and without DMA can be built when
requesting CONFIG_UART_ASYNC_API.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
There are situations in which the async API for uart can be provided
by another driver (case in point, uart_rtt), and thus there is no valid
DMA controller for the uart_sam0 driver to talk with.
By separating the configuration, there's no need to exclude samd20-based
boards (that have no DMA peripheral) from the uart_async_api tests.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
It is the arduino_i2c node on the board.
Also remove comment from arduino_r3_connector as the arduino_i2c
node can be used.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
This board is a relatively inexpensive development kit for USB-PD
controllers, using an UPD301C controller.
This Zephyr config includes support for:
* UART (present on he debug header of the board), tested with the
hello_world sample application;
* the one standalone LED (CAP_MIS), tested with the blinky sample
application;
* the rotary encoder (PDO_SEL), via ADC, tested with the adc sample
application;
* the current sense amplifier (I_SENSE), currently untested;
* the SPI bus, connected internally in the UPD301C to the UPD350;
* the I2C bus, exposed on the debug header, currently untested.
Note that the drivers.uart.async_api.rtt has to be disabled, as it is
for other m0 boards with no dma or it fails to build.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Modify the test to not rely on assumption that RX buffer is released
when it is fully released. RX buffer maybe released after any RX_RDY
event within the buffer, e.g. after each timeout driver may be
switching to the new buffer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Configure the overlay to have DMA transfer with high priority
when running the tests/drivers/uart/uart_async_api on nucleo_f103rb.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
drivers.uart.async_api.rtt test started failing on xmc45_relax_kit
after f423ec255f which set
CONFIG_SERIAL_SUPPORT_ASYNC=y if uart rtt is enabled. This conflicts
with the xmc4xxx uart driver which sets the same symbol conditionally
if the dma is enabled in the device tree. The conflict created some
warning during compilation causing the CI to fail.
All the uart_async tests were disabled in
71d0394752. This commit re-enables the
test on xmc45_relax_kit and only excludes the rtt test that's failing.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Add support for the Wio Terminal board, including support of its
sensors, MicroSD and LCD. Tested with samples already available.
Signed-off-by: Joel Guittet <joelguittet@gmail.com>
Adds overlay and config for xmc45_relax_kit.
The Kconfig entry CONFIG_SPEED_OPTIMIZATIONS=y must be set
to pass the test at baudrate 921600 bps.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Use the macro as defined by the
include/zephyr/dt-bindings/dma/stm32_dma.h to configure the
dma channel.
Use the STM32_DMA_PERIPH_TX or STM32_DMA_PERIPH_RX value.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Align configuration for nrf52840dk to use the same loopback pins
for uart_async_api and uart_mix_fifo_poll tests.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit configures the testcase to run on the
stm32u5x5 target boards. USART2 is selected
Pins Tx and Rx (PD5 PD6 on CN9) must be connected on the HW board
to pass the test.
The USART transfer uses the GP DMA transfer with request
27 and 26 on 2 DMA channels (0-15).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit configures the testcase to run on the
stm32u585 target boards. USART3 is selected
Pins Tx and Rx (PD8 PD9 on CN14) must be connected on the HW board
to pass the test.
The USART transfer uses the GP DMA transfer with request
28 and 29 on 2 DMA channels (0-15).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Many driver samples or tests only had 'drivers' as the tag, without a
tag indicating what driver that is exactly, so add some missing tags.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Configure through an overlay file, the nucleo_wb55rg board
for running the tests/drivers/uart/uart_async_api.
DMAMUX is used for transfer on channels 0 & 1 with
LPUART peripheral request 17 & 16.
No hw flowcontrol for this test.
Connect pin A0 & A1 of CN8 to PASS the test.
Note that I2C3 pin assignment might conflict (PC0 & PC1).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for the Feather M0 LoRa board, including support of its
Semtech Lora radio. Tested the radio using a pair of boards.
Signed-off-by: Miguel Dardenne <miguel.dardenne@gmail.com>
Initialize devices at compile time. Also fix some ready check problems
(e.g. in async test readiness failure just resulted in a printk, but
test continued...).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Also, fixed issue that change exposes with SEGGER RTT testing
in that in some platforms the device getting selected for the
RTT test was not the RTT device.
Signed-off-by: Kumar Gala <galak@kernel.org>
uart_async test and spi_loopback test require UART and SPI
with an ASYNC option.
The SAM0 UART/SPI driver requires configuring DMA support.
Arduino MKRZero is not DMA configured like other SAM0 boards.
We exclude it from the tests.
ea36f9b and f4c5bdf already exclude other SAM0 boards from these tests.
Arduino MKRZero also followed these PR policies.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
This PR adds support for the RT1060_EVKB as a variant of the RT1060 EVK.
Blinky app tested locally on RT1060_EVKB.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
This sets the dts of dma for using the uart 6 asynch api.
The stm32f746 has a dma V1 with request 5 for Tx/Rx usart6
The Tx&Rx pins (PG14, PG9) of the usart6 are connected
on the nucleo_f746zg board to pass the test
The CONFIG_DCACHE=n must also be set to disable Dcache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This sets the dts of dma for using the uart 6 asynch api.
The stm32f767 has a dma V1 with request 5 for Tx/Rx usart6
The Tx&Rx pins (PG14, PG9) of the usart6 are connected
on the nucleo_f767zi board to pass the test
The CONFIG_DCACHE=n must also be set to disable Dcache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
As now the CONFIG_NOCACHE_MEMORY is not responsible for controlling the
data cache on STM32H7 SoC, the CONFIG_DCACHE=n must be set explicitly
to preserve previous behavior as UART driver is not using no-cache
buffers.
Considering the above comment, the CONFIG_NOCACHE_MEMORY can be safely
removed.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
if DMA support is not present, LPUART driver will not compile when async
API support is required. Skip test cases when dma support is not present
and LPUART driver is enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
