k_cycle_get_32() expands to RTC->COUNTER in nrf_rtc_counter_get(),
sys_clock_hw_cycles_per_sec() expands also properly.
Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>
Fixes a minor documentation issue and suggests/documents additional RTT
tracing and logging options.
Showcases logging via RTT UART which is now available w/o restrictions
due to the preceding change. This has been tested on CC13/26xx hardware.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The BLE backend has a bug that when the MTU size is less than
the buffer the notification always fails and does not allow
to flush the buffer.
This fix checks for the MTU size of the current connection
and adjusts it. In addition, the buffer size is no longer
settable by the user and depends on the transmission size
of MTU set with CONFIG_BT_L2CAP_TX_MTU.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This symbol detects whether there is any available full libc for a
particular target, allowing tests to filter on this condition.
Signed-off-by: Keith Packard <keithp@keithp.com>
This applies the coccinelle script to another set of files:
samples/bluetooth/bthome_sensor_template/src/main.c
samples/boards/stm32/power_mgmt/standby_shutdown/src/main.c
samples/drivers/smbus/src/main.c
samples/drivers/virtualization/ivshmem/doorbell/src/ivshmem.c
samples/fuel_gauge/max17048/src/main.c
samples/hello_world/src/main.c
samples/sensor/proximity_polling/src/main.c
samples/subsys/logging/ble_backend/src/main.c
tests/drivers/build_all/mfd/src/main.c
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
A new Z_SPIN_DELAY() macro has been added which
can be used to reduce a bit the amount of noise
due to the POSIX arch need to break busy loops with
k_busy_wait().
Use it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
New filter "TOOLCHAIN_HAS_NEWLIB == 1" was applied
because of following chain of dependencies:
LOG_MIPI_SYST_ENABLE=y --> CONFIG_MIPI_SYST_LIB --> \
--> REQUIRES_FULL_LIBC --> NEWLIB_LIBC.
Not all compillers announced in Zephyr support NewLib.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Adding multidomain support by introducing log_link module which
acts as a receiver of log messages created by another domain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
samples should not use CONFIG_TEST_EXTRA_STACK_SIZE, instead, they
should set the recommended stack size directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming objects which had 2 in the name to indicate that
it is v2 specific. Once logging v1 has been removed such
suffixes are redundant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The logging subsys has evolved to a point where XCC/GCC cannot
compile anymore as it only supports C++98. So exclude C++
samples from build. And just use XCC/Clang instead for C++.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC does not support _Generic as it is being used by the runtime
tagged argument feature. So exclude them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds to the usual qemu_x86_64 and qemu_cortex_a53 to
the entries for Sys-T catalog message in sample.yaml.
As the Sys-T backend has been updated to support 64-bit
for catalog messages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
integration platforms should not be in common section if we have
scenarios with different set of integration platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This extends the samples to build for C++ using the same code.
This shows MIPI Sys-T can work C++ too.
The change to main.c regarding to the struct log_msg_ids is
simply that the compiler errored out complaining the members
must be initialized the same order as the declaration.
Also C++ dislikes a string literal being assigned to char*,
so assign them to const char* instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates the sample.yaml file to exclude problem architectures
from this sample project. SYS-T does not support 64-bit or
big endian architectures. The posix arch is excluded as it
is generating numerous anomolous runtime messages because it
does have the means to determine when data resides in the
rodata section.
It also converts the list of allowed platforms to lists of
platforms to use for integration testing. This helps to increase
general testing coverage.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adding configurations for enabling this sample project on cavs
platforms. This patch also contains a fix to mipi_syst library
which resolves the memory alignment issue across different
architectures.
Fixes#43344
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
This adds to sample.yaml to build for MIPI Sys-T catalog message
support.
Note that the current implementation of emitting Sys-T
catalog messages does not support 64-bit and architectures
having additional alignment requirements. So only allow qemu_x86
and mps2_an385 at the moment.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds qemu_x86_64 and qemu_cortex_a53 to make sure 64-bit
support for Sys-T is not broken in the future.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compilers often combine strings to conserve space, if one string is
a perfect substring of another one towards the end. So add another
string in the test to make sure sys-t with catalog messages is still
working correctly under this scenario.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compilers often combine strings to conserve space, if one string is
a perfect substring of another one towards the end. So add another
string in the test to make sure dictionary logging is still working
correctly under this scenario.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enables CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY so that
the UART backend is in dictionary logging mode.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adding mechanism to all the backends to switch the logging formats
at runtime while leveraging the function pointer table based upon
the Kconfigs which also cleans up the logging backend design.
Also demonstrate the working API with the changes
to syst sample. Clean up Kconfig for backends and add a standard
template to generate the Kconfigs for logging formats to be used
by all backends.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This expands the sample to do both v1 and v2, and both immediate
and deferred modes for each logging verion. This is to make sure
MIPI Sys-T output is not broken for all combinations. Default is
v2/immediate using prj.conf. Deferred mode is enabled via
overlay.
Also add qemu_x86 as an allowed platform as the samples are
working there too.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a few log lines to show how string processing works
with Sys-T.
Note that CONFIG_LOG_BLOCK_IN_THREAD=y to make sure all log
messages are printed instead of being dropped.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Reduced logging mode selection to deferred, immediate, minimal and
frontend. Decoupled logging version from mode and created CONFIG_LOG1
which can be used to explicitly select deprecated version.
From now on, chosing CONFIG_LOG_MODE_{IMMEDIATE,DEFERRED} will result
in version2.
Deprecated CONFIG_LOG2_MODE_{IMMEDIATE,DEFERRED} with cmake warning.
Codebase adapted to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding #ifndef CONFIG_LOG2 condition for log_msg_ids and
log_string_sync in sys-t sample. Extending support for
v2 logging in sys-t sample.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Added board specific configuration which enables use of
asynchronous UART API in UART log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
