Add RK055HDMIPI4M specific testcase to LVGL. This allows LVGL to be
verified on the RT1170 and RT595 EVKs from NXP, which support LVGL using
this shield.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds a zephyr,lvgl-encoder-input compatible to the native_posix board
overlay and the required code to control an arc widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Added lvgl-pointer definition in devicetree, to enable
touch-support in lvgl applications.
Kscan support has been removed from m5stack_core2 as this was just a
temporary thing.
Has been tested with lvgl hello world sample.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
This commit adds a callback to the button to reset the counter when the
button is pressed. The button is automatically created when lvgl
pointer or kscan support is enabled. The same reset functionality was
already available for possible gpio button.
Please make sure to define a zephyr input device in device
tree (e.g. "zephyr,lvgl-pointer-input").
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
After adding the lvgl pointer device into the board dts the custom overlays
are not needed anymore.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a lvgl-button-input pseudo device to the lvgl sample. Triggering the
SDL gpio (pressing 'b') on the keyboard should trigger a click event at the
center of the screen.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Changes all board specific configurations to use the new
zephyr,lvgl-pointer-input compatible. The kscan_input node in the boards
remains to have downstream backwards compatibility.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add gpio-keys codes for all boards. These are mostly INPUT_KEY_0 and so
on but I've used some more specific ones where it was obvious that
there's something else on the boards.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable PXP rotation for LVGL sample. The PXP is configured to
rotate by 0 degrees, so the original image is left untouched.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable PXP engine with RT1170 EVK. The PXP is set to rotate by 0
degrees in the LVGL sample, for testing purposes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The err variable is only used if the GPIO is configured in,
so move it to the right scope to avoid a build warning.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Enable the input pointer code for the LVGL sample in native posix. This
is supported by SDL which is used for the display anyway, so not reason
to keep it off by default.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Turn off display_blanking to make it able to refresh on a device
even when blanking default off.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Enable SDL keyboard events using the zephyr,gpio-emul-sdl driver and
alias key to sw0.
Pressing 'r' on the keyboard resets the counter.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The `cfb_custom_font` sample has been relocated from `samples/display`
to `samples/subsys/display`.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Have the display enabled in devicetree will now get the driver
enabled by default when CONFIG_DISPLAY=y is set. So we can remove
setting driver enabling Kconfig values in various .conf and
defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
This sample depends on lvgl, so do not try and build it if lvgl is not
part of the workspace and if it was excluded in a local manifest.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If we enable DISPLAY=y, ILI9341 will be selected automatically if all of
its dependencies are met as well (SPI), let's add this to the board
defconfig.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
LVGL eats a considerable amount of flash, so tests may fail on platforms
that meet all requirements but that have a low amount of flash, e.g.
nucleo_g071rb. Set min_flash for all cases to 250K (result of some quick
experimentation). Also update minimum ram to exclude platforms that
cannot run Zephyr + LVGL (e.g. those with just 16K).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
'display' harness doesn't exist, so replace it with 'none' to make
things more clear. It is required so that test is not run e.g. on CI,
test would timeout because the GUI is left ON forever.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify sample.yaml by just adding a single test case. In future
commits, test case will be refined to be based on DT filters so that it
is made more generic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Add configuration for stm32h7b3i_dk board which enables
integration of touch controller (KSCAN) present on the board
into LVGL
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We're now using the Kconfig copied from the upstream lvgl repository. It
uses the LV_ prefix for all options while we're using LVGL_ for
Zephyr-specific ones. Make the latter consistent with upstream but also
make sure they're distinct from lvgl's by using LV_Z_ as the prefix.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Start using the upstream Kconfig from LVGL and move the glue code out
of the zephyr tree and put it under lvgl/zephyr/ in modules.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
This updates the lvgl in-tree glue code to work with version v8.1.0 and
bumps the west manifest accordingly.
The following are the most significant changes:
- The logging callback has changes in lvgl and no longer provides the
caller with an integer log level code. We now need to parse the log
string's prefix to determine the level.
- Several Kconfig options (mostly for default values of various settings)
have been removed because these values are no longer configurable in
lvgl.
- The library no longer performs a deep copy of the display and input
device driver structs, so these must no longer be allocated on the
stack in the init func.
Other than that it's mostly about renaming of various structures and
functions and adjusting the calls if function's signatures have changed.
This patch allows all in-tree users to work correctly but it's likely
it doesn't support all new widgets and layouts added in lvgl v8. These
however can be added gradually once this is upstream.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Current lvgl code allows to use the kernel heap for dynamic memory
allocation. The k_heap API doesn't however provide k_realloc() which
will be needed in order to update lvgl to v8. Nico suggested there's
no good reason for lvgl to use k_heap and it should stick to either
the libc's allocator or depend on its own private sys_heap.
The alternative would be to extend the k_heap API to provide k_realloc()
but this may be tricky for several reasons and for now there would
be a single user anyway.
This removes the choice of using k_heap for lvgl and renames the user
pool to SYS_HEAP in Kconfig and makes it the default option.
The prj.conf for the lvgl sample is modifed to specify the number of
memory pool blocks instead of the total size as the default block
size is 2048 and it results in the same size of memory.
Suggested-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
The sample graphical Hello World program uses the image widget as well as
the Montserrat font size 14. While currently those are being selected by
default, it won't be the case once we update to lvgl v8. Select relevant
Kconfig option in prj.conf.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
The driver does not implement a display API, it has a custom API. Having
it under display is confusing, since display API consumers may expect
they can use it. These sort of custom drivers fit better under
drivers/misc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The ip_k66f doesn't have I2C_0 status set to OKAY so the build of
this sample generates warnings in the nightly build. Root problem
is that the groove display is not ported to the device tree so
there isn't a standard way of filtering on the display being
part of the platform.
fixes#41523
Signed-off-by: David Leach <david.leach@nxp.com>
