This modification frees up around ~10kB of RAM and make sample code
working again.
1) Reduced net packet size and count.
2) Increase Wi-Fi heap to avoid memory allocation failure.
3) Keep log as minimal.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
cipher_list and sec_tag_list are used only with zsock_setsockopt
in MQTT. For that use, they can be const (and potentially kept
in flash memory).
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Google Cloud IoT Core has been retired on August 16, 2023.
Removed the sample and the link to it in a previous release note.
Added a redirect to other IoT cloud samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit adds a sample application which demonstrates how
to use the new driver and modules. The sample uses power
management to turn on the modem, uses network management
to wait for L4 connected, then uses DNS to get the IP
of the server running the python script found in the
server folder, which echoes back data recevied to it.
A packet containing psudo random data is then sent to
the server, which the echoes it back. To validate the
capability of the driver to restart the modem, the
modem is restarted, and the packet is sent again.
The server is hosted by linode, and uses the domain
name test-endpoint.com
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add simple TFTP client code using TFTP client library
Initiate connection (IPv4) with optional DNS resolution
Operate get operation then put operation in octet mode
Tested on native_posix
Issue/Discussion #60985
Signed-off-by: romain pelletant <romain.pelletant@fullfreqs.com>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
A sneaky whitespace was causing inconsistent rendering in the list of
available overlays.
Fixed by switching to a list table which is arguably now even easier to
read.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This board has a single instance of EMAC connected to a NXP TJA1103
Ethernet PHY. Currently, there is no driver for this PHY and its
pin strapping configuration allows to use it without software
configuration, so EMAC is configured as fixed link.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
add one Ethernet twister test for nucleo_h563zi,
nucleo_h743zi, nucleo_f429zi, nucleo_f746zg.
remove the common: harnesses: net that are not supported
leave harnesses: net for all other test execpt the one we use
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
This is no longer necessary, as this option is selected as a dependency
for class implementations where it is required.
Also remove redundant test cases.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
There is some ambiguity with the DHCPv4 handling in the dns_resolve
sample. On one hand, the sample uses net_config library, which does
initiate the DHCPv4 on the interface (if enabled) and may block the
initialization until the address is assigned (in case there is no other
statically assigned IPv4 addresses.) On the other hand, the sample
registers for NET_EVENT_IPV4_ADDR_ADD in case DHCPv4 is in use, delaying
the DNS queries until address is assigned.
In case net_config delayed the initialization however, this will not
work, as the event handler will be registered only after DHCPv4 address
is assigned, so the callback will not get executed.
Fix this, by checking if DHCPv4 assigned address already exists on an
interface - if so, schedule DNS queries immediately. Otherwise (for
example in case when net_config was not configured to wait for address)
register an event callback, and schedule queries from there.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the default which is set to CONFIG_BOARD is used, then the lwm2m
client fails to set the client identity as the default maximum length
allowed is only 16 and for some boards this exceeds.
So, increase the default length to accomodate almost all boards. Also
add a build assert for the length validation.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case UDP is disabled, init_udp() is not compiled and the build
fails. Fix this, by providing dummy implementations for UDP functions,
in case UDP is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
All application level TLS operations should be guarded with
"#if defined(CONFIG_NET_SOCKETS_SOCKOPT_TLS)" and not mbed TLS configs
only. Otherwise, in case mbed TLS is enabled, but the sample is not
configured to use TLS (hence TLS credential library is not available
for example), the build may fail or produce spurious warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
websocket_disconnect api does not closes user tcp socket, so tcp socket
must be closed after done.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The method ieee802154_radio_handle_ack() does not belong to the
PHY/radio layer but to the L2 layer. It is a callback called from the
radio layer into the L2 layer and to be implemented by all L2 stacks.
This is the same pattern as is used for ieee802154_init(). The
'_radio_' infix in this function is therefore confusing and
conceptually wrong.
This change fixes the naming inconsistency and extensively documents
its rationale.
It is assumed that the change can be made without prior deprecation of the
existing method as in the rare cases where users have implemented custom
radio drivers these will break in obvious ways and can easily be fixed.
Nevertheless such a rename would not be justified on its own if it were
not for an important conceptual reason:
The renamed function represents a generic "inversion-of-control" pattern
which will become important in the TSCH context: It allows for clean
separation of concerns between the PHY/radio driver layer and the
MAC/L2 layer even in situations where the radio driver needs to be
involved for performance or deterministic timing reasons. This
"inversion-of-control" pattern can be applied to negotiate timing
sensitive reception and transmission windows, it let's the L2 layer
deterministically timestamp information elements just-in-time with
internal radio timer counter values, etc.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
running samples/net/cloud/mqtt_azure in QEMU with default
configuration crashes with exception. This PR change doubles
the default workqueue stack size in a attempt to fix the issue
reported in: GH#58930.
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from samples. It
has been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
send_simple_coap_request needs to return a result from previous functions
instead of success at the end of the function. Without doing so the example
may wait for a response from a coap sever when a message failed to send.
Signed-off-by: Matthew Bradbury <matt-bradbury@live.co.uk>
Extend the DHCPv4 sample to make use of the option callback functionality.
This serves as a reference of how to register and use a custom option
callback.
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Clarify the comment in the code so people looking to use mDNS don't
think that interaction with Zephyr is necessary for mDNS support to
work, its in fact built into the networking stack when the mDNS
feature is enabled.
Signed-off-by: Chris Morgan <chmorgan@gmail.com>
conn_mgr now allows applications to request that ifaces be ignored.
This commit changes the echo_server sample to use this feature to
filter out the tunnel iface, instead of manually filtering events
generated by it.
This will allow the echo_server sample to remain compatible with
planned changes to conn_mgr, namely a switch from events being
fired for every individual iface that goes up or down, to only
being fired when connectivity is gained or completely lost.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Since conn_mgr is a subsystem rather than a library, relocate it
directly into subsys/net rather than subsys/net/lib/
Rename header files to better match their function.
Remove net_ prefix from conn_mgr types, API, and files, since it is
unnecessary.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add DT and Kconfig overlay for new experimental CDC ECM
implementation. USB device support configuration and
initialization can be done through shell by following
commands:
uart:~$ usbd config add 1
uart:~$ usbd class add cdc_ecm_0 1
uart:~$ usbd defaults
uart:~$ usbd init
uart:~$ usbd enable
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This sample application demonstrates the implementation of an
MQTT client that can publish messages to AWS IoT Core using
the MQTT protocol.
Fixes#22866
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Now that the nrf52 HW models support it,
let's use their flash model instead of falling back
to the openthread RAM settings backend.
Note that the flash model defaults to just keeping the
flash content in the Linux process heap.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the minimal C library malloc implementation moving to libc/common, all
of the related Kconfig variables have also changed. Update uses within the
tree.
Signed-off-by: Keith Packard <keithp@keithp.com>
Extend the sample to be built with native_posix
prevent issues like #57133 in the future. Also extends the qemu
build to build a "raw" configurationw without POSIX_API or
NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
