STM32F2 and STM32L1 Cat. 1 only provide the coarse calibration feature
which is not supported by the code yet.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
This replaces the verbose LL_RTC_CONVERT_BCD2BIN and LL_RTC_CONVERT_BIN2BCD
by the bcd2bin and bin2bcd Zephyr provided equivalent
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
This adds mutex a lock in rtc_stm32_set_time and rtc_stm32_get_time to
ensure consistent data reading. Also performs register reading in a single
operation in rtc_stm32_get_calibration for the same reason.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
LL_RTC_Init() internally uses LL_RTC_EnterInitMode() wich uses a blocking
while loop. This rewrite uses the less CPU time wasteful local
rtc_stm32_enter_initialization_mode() instead. As a side effect
LL_RTC_InitTypeDef in rtc_stm32_config is not needed anymore.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Calling LL_RTC_Init causes the RTC to stop while being configured thus
inducing time drift. This commit avoids doing it at each reset if the RTC
is already properly configured.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
As shadow registers bypass is enabled, an erroneous reading may occur at
each day or second increment. This commit fixes this issue.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
For now clock can be read and written.
Clock can be set in full iso8601 time format, like 2023-12-24T12:45:56
or by just providing either data or time
Alarms not accessible
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
This commit adds input clock selection to the RTC driver. This
is required to allow for the real hardware to operate. The
QEMU emulated hardware ignores the input clock settings.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The MC146818 driver was not properly initialized
by the driver, interrupts where not handled correctly,
and the alarm feature was not implemented properly.
This commit fixes these issues, while removing some
code which became redundant as the MC146818 driver
was patched.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
STM32F1 series RTC is not compatible with other STM32F1 series,
and it uses a different LL API.
Current implementation of the driver doesn't take this into account,
so we need to explicitly exclude STM32F1 series support until
some changes are made.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32 RTC driver for the new RTC API.
Can't coexist with old COUNTER based RTC
Though supported by HW, RTC_ALARM still to be supported by driver
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
That's correct. We are still fixing the Y2K bug in 2023 \o/
* write century to RAM register 0x32
* ensure year register is in [0,99] (inclusive)
Aside from that, there were a few other errors in the driver.
* translate epoch-centric RTC API year to begin at 1900
* fix off-by-one error with month limit
* fix off-by-one error with wday
* fix off-by-one-hundred error with year limit
* adjust timeptr values in rtc_mc146818_validate_time()
* adjust timeptr values in rtc_mc146818_validate_alarm()
With the above, the testsuite passes!
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added RTC driver that supports Motorola MC146818B
Enabled RTC set/get time and alarm, alarm callback
and update callback.
Counter and RTC uses same hardware in case of
Motorola MC146818, so they can't be used at a time.
Updated stand-alone mc146818 counter dts instances
to support rtc and counter with same compatible
string of "motorola,mc146818" on ia32, atom,
apollo_lake, elhart_lake and raptor_lake platforms.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Update the RTC driver menuconfig title to match the unified format
introduced in c41dd36de2.
Move the RTC driver menuconfig entry so the menuconfig list is still
(mostly) alphabetically sorted.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The emulated RTC device driver is used to emulate a real
RTC device. Note that it is not a replacement for the
native_rtc module, which is used to control simulated time,
get time from the host system, etc.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This test suite adds tests for the following:
- Setting and getting time
- Validating time is incrementing correctly
- Validating behavior of alarms with callback disabled
- Validating behavior of alarms with callback enabled
- Validating update callback
The test suite uses the devicetree alias rtc to find
the device to test.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This commit adds the rtc.h header file which contains
API functions for real-time-clocks, which are low power
devices which track and represent broken-down time.
It also changes one line of doxygen documentation in the
maxim_ds3132.h file to place it in its own group.
The handlers for use of the API from userspace is also
added with this commit.
The API is split into one mandatory section, setting and
getting time, and three optional sections, alarms, update
event callback, and clock calibration.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
These calls are not accessible in CI test, nor do they get built on
common platforms (in at least one case I found a typo which proved the
code was truly unused). These changes are blind, so live in a
separate commit. But the nature of the port is mechanical, all other
syscalls in the system work fine, and any errors should be easily
corrected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move rtc.h to drivers/rtc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move power.h to power/power.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
These symbols appear within an 'if RTC' (in drivers/rtc/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Check clock_control_on return value now that it is checking appropriate
bus is used in the request.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
