Fix smp_svr Bluetooth configuration for when BT_HCI_ACL_FLOW_CONTROL
option has been enabled. In this case the CONFIG_BT_L2CAP_RX_MTU
is used instead of CONFIG_BT_RX_BUF_LEN to set the RX MTU.
This lead to a negotiated MTU of 23, which is not supported by
the SMP_SVP protocol.
Removed the board specific configuration files as these are just
duplications of the overlay-bt.conf or overlay-bt-tiny.conf and
the readme specifies how these should be used.
Reduced the TX MTU to end up with the same value as the RX MTU,
CONFIG_BT_RX_BUF_LEN - 4 (HCI ACL header) - 4 (L2CAP header).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Now that the relevant APIs generalize properly for bindings without
flags, we can remove some special case checks from the tree.
I couldn't find any more, but I did this kind of quickly, so it's
possible I missed some.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Zephyr introduced subsys/mgmt folder for MCU management. Move UpdateHub
sample to its correspondent folder at sample/subsys/mgmt folder.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
In order to be able to add more entries under 'subsys/mgmt', move the
current contents of it, which relate exclusively to MCUMgr, to its own
folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The fs_open has been extended with support for open flags.
Currently supported flags are:
FS_O_READ -- open for read
FS_O_WRITE -- open for write
FS_O_CREATE -- create file if it does not exist
FS_O_APPEND -- move to the end of file before each write
The FAT FS and LittleFS front-ends within the Zephyr has also been
modified to utilize the flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Applications using IPM callbacks get the imp device instance pointer
now through the callback. Which help to clarify a bit the code here and
there as well.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sample tries to estimate maximum number of messages that can be
logged. It was using two system cycles and counting number of
messages logged in that window. It did not take into account the
fact that clock frequency may vary and logging speed also varies
(especially if LOG_IMMEDIATE is enabled). Presented results may
be faulty and misleading.
Fix is attempting to adjust window size to increase precision of
the measurement.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Configuration file was left unchanged after development
of USB Audio class. Deleted configs should never be present.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
In fat_fs example, if we choose a large size SD card to connect with,
the result of memory size calculation coule be wrong due to the missing
brace for manipulating operator priority.
Fixes#26266.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
USB access to the flash device is not synchronized with the
application, so if the application needs to create a new file system
USB may read configuration state that is incorrect. Wait until the
the application is done with the flash before starting USB.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
The upload command invokes lfs_stat() on the destination file which
overflows the stack. Adding 256 bytes seems to make it work.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add a note for composite (CDC+DFU) device overlay.
Composite device CDC+DFU may not work with Windows OS host.
Windows OS does not send reset after DFU_DETACH request
(does not re-enumerates) and thus make it unable for
the device to restart in DFU mode.
For more details refer to #23337.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The USB audio samples when added didn't have any tests: sections in the
sample.yaml so they would never get build on any platform as part of
sanitycheck. Add the tests: section and limit the samples to build on
nrf52840dk_nrf52840 as that was the intended platform these samples
where initially developed for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
File system support is built into the Bluetooth overlay, but can now
also be enabled independently for other transports.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use a complete identifier, first two parts are section.subsection, then
at least another part for the specifics being tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds USB audio sample to the Zephyr project.
The sample configures one I/O device:
- Headset (2 channels, Fs=48kHz, PCM format)
Input data sstream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds USB audio sample for Zephyr project.
The sample configures two devices:
- Microphone (2 channels, Fs=48kHz, PCM format)
- Headphones (2 channels, Fs=48kHz, PCM format)
Input data stream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Recommend setting up the python-can configuration file before running
the sample Python snippets and remove the GNU/Linux specific comment
from each snippet.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Updates the fat_fs sample documentation to reflect that it can run on
multiple boards, not just the nrf52840_blip.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the fat_fs sample yaml to depend on a feature rather than
whitelisting specific boards. This implicitly extends the sample to
mimxrt10{60,64}_evk boards, since they already support the feature.
The only whitelist board remaining is the nrf52840_blip, which requires
a device tree overlay for this sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the fat_fs sample to move board-specific configurations to
separate files and support a shared prj.conf file.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This allows mass storage exposure of a littlefs file system,
specifically one on the SPI NOR flash of the nrf52840dk_nrf52840. In
combination with littlefs-fuse this allows a host system to examine
and change the local storage of a Zephyr application.
Note that it is critical that all parameters of the file system match
between what Zephyr is using and what littlefs-fuse is using.
Inconsistencies can produce confusing results where each system sees
different content. The README has been updated with a detailed
example.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Drop the old redefine-everything-in-a-special-conf approach and put
the customization appropriate for this board into the board directory
where it's handled automatically.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The API call to close the flash area was only invoked when the flash
area was erased. It should be closed in all paths.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
