Remove dependency on CONFIG_BT_ACL_FLOW_CONTROL and use
CONFIG_BT_L2CAP_RX_MTU always to set L2CAP RX MTU.
The ATT MTU is set from two different KConfig options depending
on if CONFIG_BT_ACL_FLOW_CONTROL is enabled, which makes it
a confusing option and hard to provide a conf file that
supports multiple board configurations.
This changes the behavior when CONFIG_BT_ACL_FLOW_CONTROL and
CONFIG_BT_BUF_RX_LEN was used to set the L2CAP RX MTU, and by
extension the ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix smp_svr Bluetooth configuration for when BT_HCI_ACL_FLOW_CONTROL
option has been enabled. In this case the CONFIG_BT_L2CAP_RX_MTU
is used instead of CONFIG_BT_RX_BUF_LEN to set the RX MTU.
This lead to a negotiated MTU of 23, which is not supported by
the SMP_SVP protocol.
Removed the board specific configuration files as these are just
duplications of the overlay-bt.conf or overlay-bt-tiny.conf and
the readme specifies how these should be used.
Reduced the TX MTU to end up with the same value as the RX MTU,
CONFIG_BT_RX_BUF_LEN - 4 (HCI ACL header) - 4 (L2CAP header).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removes 'flash' command function that displays the command's subset.
Command's subset will still be displayed in current code.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
On large memory areas printing 8 bytes/line is not enough.
Increased printing 16 bytes per line.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Adds unaligned and pattern write functionality.
The reason this was added is chips with large pages, e.g. 256 can't be
normaly writen via shell, thus the need to write a pattern with any
length to a memory area.
The unaligned write command allows writing a data frament in any place
in memory, the data backup, protection, erasing and writing is
automaticaly handled. This makes it easier to test all flash controller
functionality in one command, also write any persistent data to any
flash address.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The previous commits added the SAM0 DAC driver. Now document and
enable it, including enabling it in the DAC sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Fixes#27266.
cmd_hdr and acl_hdr local structs were read but never written.
Causing unpredictable errors in bt_tx_thread such as :
"Invalid HCI CMD packet length" in hci.c:2280
or Imprecise data bus errors on nrf52810.
cmd_hdr and acl_hdr are now filled with the received data
from SPI Master.
Signed-off-by: Corentin Dorothée <corentin.dorothee@gmail.com>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now that the relevant APIs generalize properly for bindings without
flags, we can remove some special case checks from the tree.
I couldn't find any more, but I did this kind of quickly, so it's
possible I missed some.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Zephyr introduced subsys/mgmt folder for MCU management. Move UpdateHub
sample to its correspondent folder at sample/subsys/mgmt folder.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
In order to be able to add more entries under 'subsys/mgmt', move the
current contents of it, which relate exclusively to MCUMgr, to its own
folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The fs_open has been extended with support for open flags.
Currently supported flags are:
FS_O_READ -- open for read
FS_O_WRITE -- open for write
FS_O_CREATE -- create file if it does not exist
FS_O_APPEND -- move to the end of file before each write
The FAT FS and LittleFS front-ends within the Zephyr has also been
modified to utilize the flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Applications using IPM callbacks get the imp device instance pointer
now through the callback. Which help to clarify a bit the code here and
there as well.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update hci_uart sample configuration for buffers to work with the
extended advertising HCI commands and events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Continuation of abafd8eb22 which missed to update the
board configuration for nrf9160dk_nrf52840.
Update main stack size for nrf5 boards. This is to support an
alternative hci_driver that has a higher stack size usage in hci driver
open. Measured stack usage in this case to 808/1024.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the nrf51_blenano board configuration which does not build,
exceeding the SRAM with over 2k bytes.
Align the configuration with the same options used to make the
bbc_microbit board build for nrf51 with 16K SRAM.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set name on HCI TX threads in HCI samples to make it easier to debug
stack size usage with CONFIG_THREAD_ANALYZER.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a note to warn users about the need to adjust
CONFIG_LOG_STRDUP_BUF_COUNT and/or CONFIG_LOG_STRDUP_MAX_STRING when
deferred logging is enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
TI CC32xx does not support binding the same port to multiple sockets,
but instead uses the IPv6 socket to handle both IPv4 and IPv6
connections. This commit modifies the sample to reflect this.
In addition, Kconfig options are overridden in order for the sample
to take advantage of wifi and socket offloading on this platform.
Signed-off-by: Vincent Wan <vwan@ti.com>
Adds native_posix hw counter model and the counter driver.
Functionality is needed by software which is tested
on native_posix and has dependency on counter.
Hardware model was developed similarly to HW timer model.
The counter driver wraps HW counter functions and exposes
basic functionalities: starting, stopping, setting and cancelling
single channel alarms.
Code was tested against: tests/drivers/counter/counter_basic_api.
Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no>
Ensure multiple OOB transactions can be perform back-to-back
Check OOB transaction response length matches is as expected.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This sample is nothing more than just a special setup of UART for some
nfc, has nothing specific to nfc and might be misleading, so removing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On TI CC32xx, the same port number cannot be bound to different
sockets. Instead, when an IPv6 socket is bound it can handle both IPv4
and IPv6 connections.
Signed-off-by: Vincent Wan <vwan@ti.com>
Fix compilation error when the DIAG module is enabled.
All core functionalities are provided.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Add a sample to demonstrate and test the Wurth Elektronik WSEN-ITDS
accel sensor. Sample code covers accel and die temperature functions.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The current shield version shows different configuration, including
disabling default ethernet and wifi interfaces. To allow easy
connection from standard headers, this add two new shield designations.
The existing boards overlays and defconfig were updated.
The documentation was update to reflect changes. A new supported
variations section helps to understand what shield variation user need
select to build their own system.
This changes requires changes on esp32 offload tests to reflect new
esp_8266 shield designations. Sam4e_xpro was keeped as the only one
with dedicated overlay and both frdm_k64f and disco_l475_iot1 were
moved to use standard arduino r3 header using extra args.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
After Zephyr 2.3.0 release system uses more RAM. This update
samr21_xpro configuration to allow echo_client be equal to
echo_server configs and remove unnecessary definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
After Zephyr 2.3.0 release system uses more RAM. This update
samr21_xpro configuration to allow echo_server run again and
remove unnecessary definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sam4e_xpro and sam_v71_xult configs are unnecessary. Now
atmel_rf2xx shield will complement all necessary configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sam4s_xplained and sam_v71_xult configs are unnecessary. Now
atmel_rf2xx shield will complement all necessary configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
extended download progress metrics to Bytes, KiB and MiB
separate number of download iterations for INF and numeric case
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Sample tries to estimate maximum number of messages that can be
logged. It was using two system cycles and counting number of
messages logged in that window. It did not take into account the
fact that clock frequency may vary and logging speed also varies
(especially if LOG_IMMEDIATE is enabled). Presented results may
be faulty and misleading.
Fix is attempting to adjust window size to increase precision of
the measurement.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
