Use memmove to copy overlapping memory when populating the
Common Extended Advertising Header Format in the advertising
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix maximum PDU len configuration when advertising and/or
scanning on primary channels.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use common definitions of HAL_USED_PPI_CHANNELS and HAL_USED_PPI_GROUPS
macros that will provide (through z_bt_ctlr_used_nrf_ppi_* variables)
information about either PPI or DPPI (depending on the SoC) resources
used by the Bluetooth controller.
Update also the hal_nordic module revision, to make the related nrfx
allocator aware of those reserved DPPI resources.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove no longer needed definition of NRFX_PPI_CHANNELS_USED_BY_PWM_SW
(after recent changes in the nrf_hw_models models, also for simulated
nRF boards the nrfx_glue.h file is processed, so this symbol is always
defined).
Remove also a couple of *_PPI_x_INCLUDE macros, to make the code a bit
clearer and to avoid things like a build assertion (also removed here)
that checks if HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_0_INCLUDE is indeed
defined as BIT(HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI(0)).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Read ISO Link Quality command
* LE Read ISO TX Sync command
* LE Set Host Feature Command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix field names of bt_hci_cp_le_setup_iso_path in le_setup_iso_path to
make CIS central/periphal compile and adjust parameter names for
ll_setup_iso_path accordingly.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
A single-shot ticker in requested state beyond the elapsed
duration or skipped due to collision shall generate an
operation callback with failure status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the case where a BLE connection ticker node collides and does not
trigger a callback to ULL, and at the same time the same node receives a
ticker update request, the update causes the node to be scheduled for
execution a second time. This has the consequence of event_counter going
out of sync, and BLE connection is ultimately lost.
The solution is to mark collsions and re-scheduled nodes as expired, and
use the increased lazy count to identify its state instead of req/ack.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implement HCI commands to read information about supported codecs and
controller delay.
* Read Local Supported Codecs command (v1 and v2)
* Read Local Supported Codec Capabilities command
* Read Local Supported Controller Delay command
The following functions are implemented as "weak" symbols and should
be overridden to fill in vendor-specific information into the above
commands.
* hci_vendor_read_std_codecs
* hci_vendor_read_vs_codecs
* hci_vendor_read_codec_capabilities
* hci_vendor_read_ctlr_delay
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Legacy functionality in ull_conn will force scheduling of a connection
which has missed an anchor point due to lost RX. This kicks in either
for previously skipped events (latenzy_event != 0) or at random
depending on the randomness of the AA bit pattern.
This behavior is good at ensuring that a connection with errors or
aborted RX gets prioitized, and helps break locked round-robin
patterns with lost sync, but it also breaks the predictability of
the round-robin ticker scheduling.
With "must_expire" enabled, this feature also kicks in for scheduling
collisions, which may not be desirable.
This commit adds a configuration flag, BT_CTLR_CONN_RANDOM_FORCE, which
is default enabled (legacy behavior).
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add separated Kconfig file for Bluetooth 5.1 Direction Finding.
Enable controller support for:
- transmission of CTE
- 2us antenna switching
- 1us antenna switching
if build for nRF52833 SOC.
Add HAS_HW_NRF_RADIO_BLE_DF to nrf52833 SOC configuration.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix node rx buffer leak if extended advertising and/or
periodic sync reports are masked out by the host.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added code comments to explain the reasons to drop
incomplete advertising and sync report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report generation that skipped
population of AD data when there was no extended header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Two ull_adv_sync function declarations, ull_adv_sync_reset and
ull_adv_sync_init was guarded by a #if causing CI issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The same code block for marking an object with
ull_disable_mark, stopping the ticker and then unmarking
the object appeared multiple places; often with a regression
bug where instead of unmarking it in case of error, it would
be "remarked".
This commit fixes the bug, and moves the functionality to
a common function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In architectures supporting more than 8 WL entries, e.g. pure
software implementations, it is desirable to be able to increase the
WL size. This change increases the range to 1..16 for SOCs other than
nRF5x and OpenISA.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix sanitycheck failures when building
samples/bluetooth/peripheral_hr for rv32m1_vega_ri5cy
platform.
Updates from nRF platform related to 255 byte AD data
support have been directly copied into openisa port to
fix build failures.
Relates to commit c2fc629dd2 ("Bluetooth: controller:
255 byte AD payload support").
Fixes#29967.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow vendor specific increase of user operation capacity for
THREAD, to support queuing additional ticker operations.
Relocate TICKER_USER_<XXX>_VENDOR_OPS to before TICKER_USER_<XXX>_OPS.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Fix regression in connection radio event close in central
role introduced in commit 222dca5598Fixes#29957.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change adds missing TX power dependencies. nRF52833 and nRF52820 SoCs
also support higher TX power values.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
pdu->len is only 8 bits and CONFIG_BT_CTLR_ADV_DATA_LEN_MAX
can be upto 1650 bytes. Fix the implementation to use 16
bit auto variable to check AD data length overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Data population when there is no
Extended Header to be filled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
.../ll_sw/nordic/lll/lll_scan.c: In function 'isr_tx':
.../ll_sw/nordic/lll/lll_scan.c:483:19: error: unused variable 'lll'
[-Werror=unused-variable]
483 | struct lll_scan *lll = param;
| ^~~
cc1: all warnings being treated as errors
This fixes https://github.com/zephyrproject-rtos/zephyr/issues/29968.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Since ADV_EXT_IND is received on primary channel, the AR is configured
to resolve AdvA in legacy PDU (assuming on 1M) and it will not resolve
AdvA properly. In such case, we should resolve AdvA manually in LLL.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This allows to synchronously resolve any address using AAR. The AAR
has to be configured prior to calling this function.
The intended use for this function is to resolve AdvA in a PDU on
primary channel when AR was configured for different PDU type. That
means AR was configured to resolve in legacy PDU, but extended PDU
was received and we need to resolve AdvA manually. In such case, AAR
is already configured so just need to trigger it again with proper
ADDRPTR.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch allows to configure AR for resolving AdvA in extended adv
PDUs. The extra 'flags' field provides a hint from caller on how to
setup AR:
- if legacy PDU is expected, AdvA is set after PDU header,
- if extended PDU is expected, AdvA is set with +2B offset due to
common extended advertising header,
- if Coded PHY is used, AdvA is set with extra +5b offset due to CI and
TERM1 fields.
Note that AUX_SCAN_REQ and AUX_CONNECT_REQ are also considered legacy
PDUs here since they are exactly the same as SCAN_REQ and CONNECT_IND.
If neither legacy nor extended PDU is specified, it's derived from PHY,
i.e. 1M means legacy, non-1M means extended. Since it is still possible
to receive different type PDU in such case, it's up to LLL to detect
this and resolve AdvA when RX is done.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Instead of guarding the NODE_RX_TYPE_USER cases with
CONFIG_BT_CTLR_USER_EXT we guard them with
CONFIG_BT_CTLR_USER_EVT_RANGE > 0 as that is the actual value that
enables/disables the NODE_RX_TYPE_USER values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of having explicit values for each entry in the enum that
has to be updated for each new entry (thus requiring manual work
which can also be error-prone), the enum will now be
self-incrementing, to make it easier and safer to add new
entries.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the #ifdef's for the node_rx_type enum. Since the
savings, they just make the enum harder to read.
Furthermore it will also ensure that all the enum values
will have the same value once the enum entries are no
longer manually defined.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
lll->conn is only defined valid when BT_CENTRAL is enabled.
Also ull_sched_mfy_after_mstr_offset_get is only used when BT_CENTRAL
is enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Host can discard scan response data by setting empty data. We simply
set PDU length to 0 to indicate this, it will make future check easier.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Align the PDU buffer reference in struct node_rx_pdu so that
node rx type specific parameters, like, terminate and sync
lost reason can be accessed without any memory alignment
issues.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
