Move reset of channel status from after the destroy callback since the
after the destroy callback the memory should be assumed to be released.
Instead clear the channel status when the channel is created in
l2cap_chan_add. This way we don't rely on the memory given being set to
the correct value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix ATT releasing the att structure back to the memory slab allocator
before the structure is actually ready to be released. The memory slab
allocator will write context data inside the freed slab which is
currently being overwritten by l2cap during channel teardown.
This manifests as an "Unable to allocate ATT context for conn" when
reconnecting with multiple connections.
Since the l2cap channel is embedded inside of the ATT context and l2cap
still has a valid referenc to the l2cap channel we need to release the
ATT context at a later time.
This should be fixed by implementing the channel destroy function and
releasing the channel there.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add the option to provide the destroy callback to the fixed channels.
This can be used to free the memory for the L2CAP channel context which
is provided by the fixed channel in the accept callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The callback function may modify the att->req and it has to be
called after the att_process. The att_process does not re-check
if att->req is still NULL.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The CONFIG_ prefix was missing.
Found with a work-in-progress scripts/kconfig/lint.py check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix assert in net_buf triggered on att encrypt change event.
ASSERTION FAIL [net_buf_simple_headroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:881
This happens because when the att request was allocated, it was not
properly initialized and req->retrying was left as true.
This caused the att encrypt change handling to assume an att request
needed to be resent, starting resending with an invalid request and
request buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor use of #ifdef to IS_ENABLED() pattern for handling cancellation
of outgoing connection attempt. Reduce the amount of indentation by
combining outer if-statements.
Move handling of canceled create connection into a helper function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix advertiser requested to use the identity address while privacy
feature is enabled will change to using RPA address when advertise is
resumed or when RPA timeout occurred.
RPA timeout does not need to run when advertiser is using identity.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle initiator role when RPA timeout expires. For direct connect
establishment procedure we make sure the RPA is refreshed when starting
initiator and limit the timeout to the RPA timeout.
For auto establishment procedure we cancel the initiator and restart it
again in the connection complete event that is generated when canceling
an initiator.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle starting of advertiser and scanner or initiator when advertiser
is using a different identity than the default identity to generate the
random resolvable address in the controller.
We need to handle this only for the privacy case because the random
address is set in the RPA timeout handler and not from the API.
When privacy is disabled we can return error code from the LE Set Random
Address HCI command instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix RPA timeout handling when the scanner is active. An active scanner
must be restarted at RPA timeout otherwise the Set Random Address
command will fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the handling of sending the LE Create Connection command and
for whitelist and direct initiator to use the same host state flag
and common handling of the privacy address.
Also simplify the way we check if the procedure has already been started
when application tries to start it again.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle a possible race condition in the host connection state.
Set the conn state of the connection object before command is sent. This
is in case the calling function is not scheduled again before the
connection complete event arrives. In this case find_pending_conn will
not find the connection object.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Starting a background scanner for auto-connection is an API that is only
available when whitelist API is not enabled.
There is currently no way to set this bit when the whitelist API is
enabled so there is not any issues with the current code, but it is
still not correct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving a connection complete event but no connection object are
available in the host something strange has happened. In this case
the controller might have a connection that cannot be controlled by the
application. It would then be sensible to disconnect this connection in
the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The path to include/drivers should not be in the compiler include path
list, only include/. In order to make this possible, always explictly
refer to hci_driver.h via the drivers/bluetooth/ path and not only
bluetooth/.
Fixes#21974.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Guard calls to bt_conn functions in bt_le_adv_start_internal with
IS_ENABLED(CONFIG_BT_PERIPHERAL) to avoid undefined symbols in builds
that do not support that role.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix error in calculation of the minimum discardable buffer size. For
the LE Advertising Report the maximum payload is 31 bytes plus
additional data in the event gives an event size of 41 bytes (given that
num_reports is 1). Since this is a meta event we need to include the
sub-event code, plus the event header of 2 bytes. Total of 44 bytes.
This is a regression from afa9c42d75 where we forgot th 1 byte for the
RSSI that is appended after the data. Easy to miss since it is not part
of the struct.
Fix error in calculation of the num complete buffer size. Here we forgot
to include the 2 byte event header.
This is a regression from 89981b07c8.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove re-using connection objects in disconnected state when creating
directed advertiser or establishing a connection as a central using
direct connection procedure.
This makes the API mores consistent it terms of which connection roles
can be started from the disconnected callback.
This also avoids a central connection object being re-used for a
connection as a peripheral instead and vice versa.
When attempting to create a new connection the API would returning
a valid connection object if there is already an existing connection
object.
This existing connection object could be either in the process of
establishing the connection or already connected.
Returning the connection object in this would give the false impression
that the stack has initiated connection procedure, when in fact it just
returned an existing connection object.
The application has the ability to check for existing connection objects
using the bt_conn_lookup_addr_le API.
Add warning plus comment possible scenarios why the a valid connection
object might exists. Most important is to explain why a valid connection
object exists during the disconnected callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Reserve conn object for undirected connectable advertiser. This means we
won't have a situation where we start a connectable advertise but will
fail to allocate a connection object for it in the connection complete
event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Reserve a connection object when starting the auto-initiator using the
controller whitelist.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bt_conn_create_aute_le returning the wrong error code when bt_init
has not been called yet. This is inconsistent with the rest of the API
functions.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor stopping directed advertiser to disconnect the state object
when calling advertise stop. This follows the same pattern as
bt_conn_disconnect.
Remove returning conn objects in BT_CONN_CONNECT state, this state could
only be an initiator starting a connection in the central role.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make sure that the auto-conn state is cleared correctly when we might
fail to allocate a new connection object.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix conn object assigned to the wrong controller connection in the
connection complete handler. This could happen when running a
directed advertiser and establishing a connection at the same time to
the same peer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add option to set the size of the discardable buffer pool. This saves
memory for the MESH use case where we expect a large number of advertise
reports.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a way to register listeners for incoming scanner packets, in
addition to the callback passed in bt_le_scan_enable.
This allows application modules to add multiple scan packet listeners
without owning the scanner life cycle API, enabling use cases like
beacon scanning alongside Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Current implementation of application's cfg_write callback only has the
possibility of returning boolean status, which in case of failure only
allows for one error code; BT_ATT_ERR_WRITE_NOT_PERMITTED.
This change makes the application able to add own security check on
characteristic subscription in the cfg_write callback and report a more
relevant error code (e.g. BT_ATT_ERR_AUTHORIZATION).
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Remove toggling the advertise enable state when the advertiser name has
been updated. Advertise and scan response data should be used by the
controller on subsequent advertising events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This further reduce the overhead on each subscription at expense of
having a dedicated array to store subscriptions, the code now maintain
a separate list for each peer which should also scale better with large
number of subscriptions to different peers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This should reduce the footprint on applications that do a lot of
requests i.e have a lot of subscriptions.
Fixes#21103
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Providing 'tmp', which was never updated, resulted in removeal of
subscriptions from the beginning.
Using the updated 'prev' resolves this.
Signed-off-by: Marco Sterbik <madbadmax00@gmail.com>
Start initiator immediately instead of scanning for device first.
If the host resolving list is used we need to go via scanner to resolve
the address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Instead of having all (=addr NULL or BT_ADDR_LE_ANY to bt_unpair) as a
special case, iterate over all connected peers and unpair them the
regular way. This means bt_gatt_clear is called too. Doing this way
allows us to remove a lot of (now) unused code as well.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
hdr->length is the length of the payload, it should be
buf->len - sizeof(*hdr) - 1 or buf->len - (sizeof(*hdr) + 1)
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
Credits are 2 octects long so an s16_t positive portion can only half to
the theorical maximum number of credits, so instead this uses u16_t and
do a bound check instead of checking for negative values.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the changes that introduced a queue k_sem is only used with
K_NO_WAIT which means it is no longer possible to wait/block for credits
so the usage of k_sem is no longer needed and can be safely replaced
with atomic_t just to count the available credits at a given instant.
Fixes#19922
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make remote features and remote version accesible to the application
through the bt_conn_get_remote_info object. The host will auto initiate
the procedures. If the procedures have not finished with the application
calls bt_conn_get_remote_info then EBUSY will be returned.
The procedures should finish during the first 10 connection intervals.
Signed-off-by: Sverre Storvold <Sverre.Storvold@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the handling of the host auto initiated LL procedures.
This makes it easier to add new auto initiated procedures as well as
reduced the maintenance by reducing code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Always check that the length of the returned command complete
event for a vendor specific command matches the expected length
when the support for Zephyr VS HCI commands are uncertain.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix multiple issues related to the way the host handles
Identity Information related to privacy
1. If the controller provided a public address the IRK
for this identity would be randomly generated but not
stored persistenly.
2. Fix the handling of the above issue which was fixed
for the random address but would initiate settings save
ID on every boot.
3. Fix the host not using the Vendor Specific HCI commands
related to retrieving the Identity Root (IR) from the
controller and using the key diversified function d1
to generate an IRK as specified in the BT Core spec.
Make sure that a Host generated ID is only saved when it is first
generated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The test_and_set_bit() should be checking if the flag was *not*
already set, since that's the scenario where we want to call the
status callback.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The ch pointer is the result of a CONTAINER_OF() operation, so
checking it for NULL is pointless. Additionally, there's no place that
calls this function with chan set to NULL.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make the channel ops struct const since there really isn't anything
there that needs to change at runtime. The only exception is the L2CAP
shell which was playing with the recv callback, however that can be
fixed by introducing a simple bool variable.
With tests/bluetooth/shell this reduces RAM consumption by 112 bytes
while adding only 16 bytes to flash consumption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This documents the special cases where -EAGAIN is returned which leads
the buffer to be queued.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that bt_l2cap_send_cb can fail the buffer state needs to be save
and restored otherwise the data stored on it would be lost.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces BT_L2CAP_STATUS_SHUTDOWN which is used to indicate when
a channel has been shutdown.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
