Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds preprocessor ifdefs to reconfigure() in L2CAP tester application
depending on the KConfig option CONFIG_BT_L2CAP_ECRED
Fixes issue #40456
Signed-off-by: Johan Lundin <johan.lundin@nordicsemi.no>
If IUT is acting as a central device and peer lost bond we need
to re-pair to restore bond. PTS is not sending any WID for this
so bonding needs to be initiated implicitly by IUT.
This was affecting GAP/SEC/AUT/BV-25-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Adds support for reading multiple variable length characteristics.
Previously read_multiple() always set the variable flag to false.
This is used by GATT/CL/GAT/BV-03-C.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
This allows to do directed advertising with peer address set to RPA.
To do this according to specification IUT must first read Central
Address Resolution characteristic to check if peer supports it.
This is affecting GAP/CONN/DCON/BV-05-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
bt_conn_unref() requires valid conn pointer but could be called with
NULL in case valid connection was not found in disconnect_eatt_chans().
Fixes#39851
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows to track security levels and check for lost bond of peer
peripherals.
This was affecting GAP/SEC/AUT/BV-21-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows for better control over IUT behaviour by Upper Tester.
PTS and TS require inconsistent behaviour in terms of how IUT should
return credits. Some tests require return on explicit UT request and
some require that IUT returns credits autonomously.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In test cases MESH/NODE/TNPT/BV-04-C and MESH/NODE/TNPT/BI-01-C
the PTS is sending incomplete Seg Ack 3 times and in some cases we run
out of retransmit attempts before PTS sends complete Seg Ack. As a
workaround, increase Segment Retransmit Count to improve stability of
these tests.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
In some scenarios when there is a need for multiple re-transmissions of
segmented messages the default value of 2 seconds may be not enough.
In my experience this improves stability of Configuration Client tests
involving multiple PTS instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This allows UT to reconfigure MTU of a channel and get notfied when
channel configuration changed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
BTP change extended L2CAP_CONNECT command by ECFC flag, which determines
which connection procedure is used (non-enhanced or ecred). Now, only
this flag determines the procedure used, not number of requested
channels.
This was affecting L2CAP/ECFC/BV-25-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
To check security of connection in read_value() we need to actually
pass connection not NULL.
This is affecting GATT/SR/GAR/BI-11-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Removes all the dead ternary expressions in the mesh bluetooth tester.
Fixes#37983.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some test cases require the IUT to respond with a certain error. To get
the stack to return this error to PTS the application needs to be
configured specifically for this test case.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Currently, with EATT enabled, when bt_gatt_read is called with multiple
handles first it'll try to use gatt_read_mult_vl, and if it fails
gatt_read_mult will be used to try again. Add option to skip
the gatt_read_mult_vl and use gatt_read_mult right away. This is needed
by tests that expect BT_ATT_OP_READ_MULT_REQ but support variable
lenght, thus don't return BT_ATT_ERR_NOT_SUPPORTED.
Removed fallback from read multiple vl to read multiple on
BT_ATT_ERR_NOT_SUPPORTED error.
This was affecting:
GATT/CL/GAR/BV-05-C, GATT/CL/GAR/BI-18-C, GATT/CL/GAR/BI-19-C,
GATT/CL/GAR/BI-20-C, GATT/CL/GAR/BI-21-C, GATT/CL/GAR/BI-22-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
GATT/SR/GAD/BV-03-C will read attr value, but we parse NULL
from `attr->read` which point to `attr_read` function.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since Zephyr supports EATT, which is reflected in ICS GATT_2_3
(Enhanced ATT bearer Attribute Protocol Supported (L2CAP fixed EATT PSM
supported) and GATT_2_3a (Enhanced ATT bearer supported over LE)
in GATT tests preamble 4.2.1.4 (Setup EATT Bearer over LE) is used
instead of 4.2.1.2 (Setup ATT Bearer over LE). Let's enable
EATT by default, allowing to run almost all GATT tests without
additional overlay.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The purpose of this PR is to automatically test the
host in the native environment.
It is used to simulate /dev/tty*, can replace by /dev/pts/*.
Also, device log will be output to stdio by default.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
In tests that expect returning error in response for l2cap
connection request we use predefined PSMs. This commit adds
check for required keysize (which will always return error,
as connection is not secure and key size will always be 0)
instead of setting security level 4 (which would return
insufficient authentication, not insufficient key size).
It also adds suport for PSM used in insufficient authorization
tests - choosing this PSM will set flag that triggers error
on channel accept.
This affects tests L2CAP/LE/CFC/BV-[10-15]-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Update the tester application to correctly reserve the number of bytes
needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
i is of uint type, so it'll never be negative. Thus, while loop
condition i >= 0 will always be true.
This patch also fixes issue with marking unused l2cap channels
as free by freeing only these that were marked as in_use by
get_free_channel(), and not all of them.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix bt_le_oob_set_legacy_tk excluded when Legacy OOB pairing is
supported. We still support legacy OOB when
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY is not defined.
It is only when we disable Legacy pairing that it is not included.
Check that the OOB data type is in fact Legacy OOB before calling
bt_le_oob_set_legacy_tk.
Log an error if the OOB type was not handled by the callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This information is useful to the automation framework when implementing
tests where the IUT is the provisioner and the test uses two PTS
instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This change adds field to L2CAP connect command allowing to choose
ECFC in L2CAP connect() function and adds required logic to perform
such connection.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
