Set the number of L2CAP TX buffers suffiently high if MCS (media
control) is enabled.
Add BUILD_ASSERT if number is too low.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Storing CCC right after it's written reduces risk of inconsistency
of CCC values between bonded peers. The option should be enabled by
default. The developer could explicitly disable it to reduce memory
usage. After disabling the option explicitly, the developer is
aware of related potential issues.
Fixes: #40758
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
CONFIG_BT_LOG_SNIFFER_INFO allows print of LTK for debugging.
If CONFIG_BT_SMP_SC_PAIR_ONLY is set a non-existing struct
entry was printes, which caused a compile-time error.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Add reception of IQ sample report from controller.
Add applications notification about received reports.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add enable of CTE reception and sampling in connected mode.
The implementation allows an application to decide what type
of CTE is expected to be reported. Bluetooth Core specification
does not provide such functionality, so it is provided as part
of host implementation. Host will filter out all reports for not
enabled CTE types.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The BT_BUF_RX_SIZE did not take the CONFIG_BT_ISO_RX_MTU
into account. Add BT_BUF_ISO_RX_SIZE which
depend on CONFIG_BT_ISO and use that for the
BT_BUF_RX_SIZE macro.
Furthermore, move the BT_BUF_RX_COUNT macro definitions
into buf.h and update that to account for ISO RX as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add new Kconfig BT_CONN_TX which is true if the ACL and
ISO configuration allows for sending data. This is mainly
used to avoid initialization of the tx_complete_work
for ISO sync receiver only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If CONFIG_BT_ISO_BROADCASTER=y and CONFIG_BT_CONN=n, i.e
an ISO broadcaster only build, then the handling of the
TX callback was not properly initialized, causes a fatal
issue when sending.
This commit moves the tx_complete_work out from the ACL group
and into the common area, so that it will be enabled
for connected ISO as well as broadcaster ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The GATT Server should wait with clearing Service Changed
indication configuration data until the response callback is
called. Otherwise the indication may not be properly delivered
to a given GATT Client.
Fixes: #40761
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The CCC update should be done after the connection is encrypted.
Before the connection is encrypted, the GATT Server does not know
if the reconnecting peer was actually bonded.
Fixes: #40759
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
In bt_iso_chan_disconnected we did not check for role before
we started to get the CIG and setting the CIG state.
Mmove the CIG code to the central part of the if statement.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When populating bt_df_per_adv_sync_iq_samples_report the
rssi was not wrapped in sys_le16_to_cpu.
Signed-off-by: Jakob Krantz <jakob.krantz@u-blox.com>
When multiple notify feature is enabled, notifications are pushed
twice. Host sends multiple notify with BT_ATT_OP_NOTIFY_MULT and
then continues to send regular notification with BT_ATT_OP_NOTIFY.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/40546
Signed-off-by: Ilhan Ates <ilhan.ates@nordicsemi.no>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Zephyr device that is not a GATT Client, should ignore indication.
An Android device may send an indication even if Zephyr
device does not support GATT Client role. In that case, the sent
error response was improperly matched to subsequent GATT request
of the Android device which caused issues.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
This change is supposed to fix the issue of incomplete acl mtu
initialization in the absence of BREDR. Find further information here:
https://github.com/zephyrproject-rtos/zephyr/issues/39549
Signed-off-by: Tobias Scharnowski <tobias.scharnowski@rub.de>
Remove LOG_MINIMAL kconfig option which was confusing
since LOG_MODE_MINIMAL existed. LOG_MINIMAL was used to
force minimal mode but because of invalid dependencies
it was leading to issues.
Refactored code to use LOG_MODE_MINIMAL everywhere and
renamed LOG_MINIMAL to LOG_DEFAULT_MINIMAL which has impact
on defualt logging mode (which still can be later changed
in conf file or in menuconfig).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Handling of HCI_LE_Periodic_Advertising_Sync_Established didn't
have implemented handling of possible failures of periodic
advertising synchronization.
There are two situations definded by BT 5.3 Core spec:
- There is no AUX_SYNC_IND pdu within 6 periodic advertising events.
If that happens, status of the command is set to (0x3E) Connection
Failed To Be Established / Synchronization Timeout.
- Periodic advertising has wrong CTE type while periodic advertising
list is not used to determine the advertiser to listen.
In this case status of the command is set to (0x1A) Unsupported
Remote Feature.
The commit provides missing functionality.
In case of error, the periodic advertising will be deleted and
application will be notified by call to terminated callback.
The callback data were extended by err member. It provides
information why periodic advertising was terminated.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Avoid runtime warning in bt_enable when CONFIG_BT_SETTINGS
and CONFIG_BT_DEVICE_NAME_DYNAMIC is not set.
This warning was intoroduced in
commit d76bba4b5e
("Bluetooth: host: Device name handling of invalid length")
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
Add a state to the bt_iso_cig struct. This makes
checks for the CIG state easier, and follows the
state machine in the core spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the validation of specific CIG parameters to its
own function. This is mainly to be able to reuse it for
validationg CIG refconfiguration parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renames the struct from bt_iso_cig_create_param to
bt_iso_cig_param as the same struct can, without
modification, be used to update the CIG as well
(function to support that will come in a later commit).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the verification of the individual cis/bis checks to
an earlier point, because we actually start allocating
resources for the groups.
This removes a double check for NULL, while also
allows us to terminate earlier if there were any
issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A CIG may be updated later to include more CIS, and thus a slist
makes more sense.
The BIG doesn't need the change, but it makes more sense to
have similar handling for both.
This change also removes the requirement that the arrays
used to create the CIG/BIG need to static.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a macro to retrieve the iso data load length (the
length stored in the iso header) with a bit mask that
ensures that we only take the first 14 bits.
This is to remove any RFU bits that may have been set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If an LTK or an STK is available and encryption is required
(LE security mode 1) but encryption is not enabled, the
service request shall be rejected with the error code
"Insufficient Encryption".
This is affecting L2CAP/LE/CFC/BV-25-C and L2CAP/ECFC/BV-32-C
qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This was affecting L2CAP/LE/CFC/BV-26-C, L2CAP/LE/CFC/BV-27-C,
L2CAP/ECFC/BV-33-C and L2CAP/ECFC/BV-34-C qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This comment was previously associated with a stand-along net_buf_ref
call. Now it's not clear what exactly it's referring to, and the
additional reference to net_buf_put() is fairly self explanatory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_ccm_encrypt only works when encrypting in place. To fix this
ccm_auth() inside bt_ccm_encrypt() must take plaintext instead of
enc_data, to not rely on assumption that plain and cypher data are the
same memory.
Signed-off-by: Ilya Makarov <ilya.makarov.592@gmail.com>
Fixes: #40069
When an CIS is connected, the peripheral did not have
any information about the QoS settings. This commit
adds information about the PHY and SDU. For some reason
the peripheral won't ever have information about the RTN.
The remaining values in the event (interval, delay and
latency) are still not exposed, nor is framing or
packing, the latter of which are not part of the event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previously, if the AD field length was greater than the maximum
fragment size - 2 bytes, an out of bounds access would occur.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/39852
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
make sure channel request reference is cleared if send fails. without
this change this could happen when att_handle_rsp was called:
1. reqs before call:
head: 0x2000f8e8, tail: 0x2000f8c0, elements:
- addr 0x2000f8e8, function pointer NULL
- addr 0x2000f8c0, function pointer 0x35c1d
2. att_handle_rsp called, calling bt_att_req_free with address
0x2000f8e8
3. reqs after call:
head: 0x2000f8e8, tail: 0x2000f8c0, elements:
- addr 0x2000f8e8, function pointer NULL
- addr 0x2000f8d4, function pointer NULL
- addr 0x2000f8ac, function pointer NULL
- addr 0x2000f898, function pointer NULL
- addr 0x2000f884, function pointer NULL
- addr 0x2000f870, function pointer 0xd92b7e7c
- addr 0x2000f85c, function pointer 0x462a03a9
- addr 0x2000f848, function pointer 0xf77b2f4b
- addr 0x2000f834, function pointer 0x33714775
- addr 0x2000f820, function pointer 0x31ba37f8
- addr 0x2000f80c, function pointer 0x5fda8494
- addr 0x2000f7f8, function pointer 0xbcff174e
- addr 0x2000f7e4, function pointer 0x341393f
- addr 0x2000f7d0, function pointer 0xbcfee8b8
- addr 0x2000f7bc, function pointer 0x1e73d9e5
which obviously is broken.
closes#39506.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Core Specification 5.3 Vol 3. Part G. 4.2:
The Signed Write Without Response sub-procedure shall only be supported
on the LE Fixed Channel Unenhanced ATT bearer.
This was affecting GATT/SR/GAW/BI-38-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
