Added dts overlay and config to support using
samples/driver/apa201 with blueclover_plt_demo_v2_nrf52832.
Signed-off-by: Jeremy Wood <jeremy@bcdevices.com>
CMSIS limits the stack size, but for qemu_x86_64, qemu_xtensa, qemu_leon3
and the boards sunch as up_squared, ehl_crb, acrn_ehl_crb need more
stack size to run this successfully, or the stack overflow will happened.
So we enlarge the stack size to 1024 for this sample case.
For other boards the original 512 is enough.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Search and replace `message(INFO " ` with `message(STATUS "`.
This would otherwise print "INFO <message"
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Change the function pm_device_runtime_enable() to return 0 on
success or an error code in case of error.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
samples/boards/pine64_pinetime has the same functionality as the more
general samples/basic/button application with the board specific
driver `pinetime-key-out`.
Signed-off-by: Casper Meijn <casper@meijn.net>
Avoid endless loop in `case MQTT_EVT_PUBLISH`
Fail on any error for mqtt_read_publish_payload_blocking, inc. -EAGAIN.
Fixes zephyrproject-rtos#40965
Signed-off-by: Jeffrey Urban <jeffrey@jeffreyurban.com>
The sample did not specify any tests in its sample.yaml file, causing CI
failures.
Additionally, the sample requires to generate secure key before building
the sample, otherwise the build fails. For the CI needs, specify a dummy
test key, which is only included if the build was triggered by Twister.
For this, specify a USE_DUMMY_KEY variable in the sample.yaml file.
Finally, fix some minor build issues in the sample itself - remove
unused variable, and remove deleted (and also unneeded) mbed TLS header
inclusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- fixes sample codes' relative paths
- updates instructions to build and run for native posix
platforms on its 64 flavor.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Sample should only be run if led is present on board.
Since, this is not the case on any of the in tree boards,
set the sample as build-only.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Many documents relied on single quotes to create references, e.g.
`my_reference`. This is possible because `default_role = "any"` is
enabled in Sphinx conf.py. However, this method comes with its problems:
- It mixes all domains together, so it's not clear to what are you
referencing: a document? a Kconfig option? a C function?...
- It creates inconsistencies: in some places explicit roles are used
(e.g. :ref:`my_page`) while in some others not.
- _Conflictis_ with markdown. Single quotes are used for literals in
Markdown, so people tend to use the same syntax in Sphinx, even though
it has a different purpose.
Usages have been found using `git grep ' `[^`]*` ' -- **/*.rst`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework samples to use DEVICE_DT_GET and DT_CHOSEN
to get default display controller device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable the flash on RT1170 and RT1160. When booting from the CM7 core,
flash will be started in XIP mode and used as storage as well as boot
memory. When booting from the CM4 core, flash is available as storage
only, and does not run in XIP mode.
This commit was tested with the following samples
-flash_shell
-littlefs
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The gsm_ppp.h is currently in include/drivers/modem directory
so change the path accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add read access to internal tmp116 eeprom which
contains the device unique id after manufacturing
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
The sample oversimplified the observe mechanism a bit - instead of
making use of CoAP APIs to verify the packets received (if they are
actually notifications for the observe) it blindly assumed that any
received packet was a notification. This could be misleading for
potential users of the CoAP library, as the sample had little use as
a reference for the Observer functionality.
Fix this by making use of `coap_reply` structure and a corresponding
`coap_response_received()` function.
Additionally, make the observe cancellation compliant with the CoAP
specification - it should be either an empty Reset message, or a GET
request with Observe option set to 1. The sample used invalid
construct of a Reset message with Observe option. For the purpose of
the sample, use the latter option.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sample intended to send an empty ACK for the notification message
(response code equal to 0), yet it included a token in the ACK reply
(which is not correct for an empty ACK).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for both Observe cancellation methods - empty Reset reply
(in place of ACK) and GET message with Observe option set to 1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The documentation of the sample refers IPv6 instead of IPv4.
Additionally, the coexisting coap_client sample also uses IPv6 by
default. Therefore, switch the sample default configuration to use IPv6
instead of IPv4.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds an spi master mode driver via bitbanged gpio. Only syncronous
transfers are implemented. Clock signal timing is accomplished via busy
waits, the gpios are manipulated via the standard gpio interface; these
two factors limit the frequency at which it can operate - but here
a simple and generic implementation was chosen over performance.
The driver supports the various clock polarity and phase
configurations, and can also work with word sizes which are non
multiples of 8bits, currently up to 16 bits.
A sample program is also added demonstrating basic use of the driver
with 9bit data words.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Rename PM_STATE_DT_ITEMS_LEN to DT_NUM_CPU_POWER_STATES to make its
purpose more clear. This macro could be made part of a Devicetree API
for PM in the future.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the PM_STATE_INFO_DT_ITEMS_LIST macro to
PM_STATE_INFO_LIST_FROM_DT_CPU to make its purpose more clear. Similar
naming scheme is found e.g. in the GPIO API.
Associated internal macros and docstrings have been adjusted, too.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Normally main.c file doesn't have a header file, because it doesn't
need to declare any interfaces to other modules.
In this sample, it's better to put the shared variables in one place,
and provide the interfaces to other modules, such as app_a, app_b,
and main.
Signed-off-by: Paul He <pawpawhe@gmail.com>
Remove the conditional attribute from the sample partition manifest.
The conditional behavior will change with TF-M 1.5 to only accept
cmake bool values on/off enabled/disabled true/false and is intended
to be generated by the build system.
Since the partition is supposed to always be enabled in the sample
there is no need to have a conditional for it.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added board specific configuration which enables use of
asynchronous UART API in UART log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This corrects the directory pointing to sample in the README
file. Also changes the TCP port number for the second serial
port exposing the GDB stub. This allows QEMU itself to expose
GDB interface through port 1234, and Zephyr's GDB stub at
port 5678.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Arduino compatible boards should have a working UART on pin 0 & 1.
On frdm_k64f this is handled by uart3
Unfortunately pinmuxing of uart3 was destroyed when enabling NETWORKING,
because the uart3 RX/TX pins was reconfigured for 1588 timers.
1588 timers are enabled by the enet child node, ptp which by some reason
is enabled by default.
1588 timers aren't needed in most cases when ethernet is being used,
so this fix ensures ptp is by default disabled. Likewise pinmuxing of
the 1588 timer functionality is now dependant of ptp being active
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Remove this line because the pm_device_busy_set function will
prevent the system to enter low power.
This sample application wants to.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Previously cycle64 was under `samples/`. It's been moved to
`tests/` and has been marked with `slow: True` so that it
will not disrupt CI by adding excessive delays.
Fixes#40367
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The supported protocol must be delivered to the firmware update object
as optional, then configured in the application.
This information is device/server dependent so does not can be fixed
in library.
Signed-off-by: Jair Jack <jack@icatorze.com.br>
Add a sample that shows how dynamic pin control can be useful to remap a
peripheral to a different set of pins.
NOTE: default pin configuration is provided for the nRF52840-DK board.
Such configuration will be removed once all nRF-based boards are ported
to pinctrl.
Thanks to Francesco for documentation suggestions.
Co-authored-by: Francesco D. Servidio <francesco.servidio@nordicsemi.no>
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Pinctrl is missing in i2c1 device description on stm32373c_eval
ovderlay file, besides using I2C1 this board (as mentioned in readme)
requires to remove 2 resistors on the board.
Make it simple and instead use a board with arduino_i2c port
available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added an observe callback so that the application can register to
receive events like observer added/deleted, and notification acked/
timed out. The notifications can be traced back to the exact data
contained within them by use of the user_data pointer.
Fixes#38531.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
This sample scans for nearby BLE devices and prints the address of the
device found and the RSSI value to the UART terminal.
Uses passive scanning and demonstrates the role of the observer.
Signed-off-by: Yeshvanth M <yeshvanthmuniraj@gmail.com>
This sample periodically sends out advertising data packets with
manufacturer data element.
The content of data sent is a single byte indicating how many
advertising packets the device has sent which rolls back to 0 after 255.
Demonstrates role of broadcaster.
Signed-off-by: Yeshvanth M <yeshvanthmuniraj@gmail.com>
This commit increases the main stack size to 2048 since the current
stack size is insufficient for the `qemu_x86` board (the default stack
size is 1024 for that board) and results in a stack overflow in the
main thread.
Note that this is required because the newlib full variant, which is
used by this sample, included in the Zephyr SDK 0.13.2 now has an
increased stack usage requirement due to enabling the C99 format
specifier support.
For more details, refer to the issue #40469 [1].
[1] https://github.com/zephyrproject-rtos/zephyr/pull/40469#issuecomment-977854095
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
