Add reception of IQ sample report from controller.
Add applications notification about received reports.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add enable of CTE reception and sampling in connected mode.
The implementation allows an application to decide what type
of CTE is expected to be reported. Bluetooth Core specification
does not provide such functionality, so it is provided as part
of host implementation. Host will filter out all reports for not
enabled CTE types.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The BT_BUF_RX_SIZE did not take the CONFIG_BT_ISO_RX_MTU
into account. Add BT_BUF_ISO_RX_SIZE which
depend on CONFIG_BT_ISO and use that for the
BT_BUF_RX_SIZE macro.
Furthermore, move the BT_BUF_RX_COUNT macro definitions
into buf.h and update that to account for ISO RX as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Add optional callback to receive status messages even when using async
API
- Split acked and unacked API
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
A user may want to control message parameters (for example, delay
parameter) on every retransmission of a published message (for example,
see section 1.4.1 of the mesh model specification). This is essential
for lighting messages as time gap between messages retransmitted via
the publish-retransmit mechanism introduces unwanted jitter/pop-corn
when such retransmissions are received by a large 'group' of lights.
This commit adds an option to `struct bt_mesh_model_pub` to make the
access layer call `bt_mesh_model_pub.update` callback on every
retransmission. This also addes few macros and functions that can be
used for further calculations.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Handling of HCI_LE_Periodic_Advertising_Sync_Established didn't
have implemented handling of possible failures of periodic
advertising synchronization.
There are two situations definded by BT 5.3 Core spec:
- There is no AUX_SYNC_IND pdu within 6 periodic advertising events.
If that happens, status of the command is set to (0x3E) Connection
Failed To Be Established / Synchronization Timeout.
- Periodic advertising has wrong CTE type while periodic advertising
list is not used to determine the advertiser to listen.
In this case status of the command is set to (0x1A) Unsupported
Remote Feature.
The commit provides missing functionality.
In case of error, the periodic advertising will be deleted and
application will be notified by call to terminated callback.
The callback data were extended by err member. It provides
information why periodic advertising was terminated.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Renames the struct from bt_iso_cig_create_param to
bt_iso_cig_param as the same struct can, without
modification, be used to update the CIG as well
(function to support that will come in a later commit).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A CIG may be updated later to include more CIS, and thus a slist
makes more sense.
The BIG doesn't need the change, but it makes more sense to
have similar handling for both.
This change also removes the requirement that the arrays
used to create the CIG/BIG need to static.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a macro to retrieve the iso data load length (the
length stored in the iso header) with a bit mask that
ensures that we only take the first 14 bits.
This is to remove any RFU bits that may have been set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds the Media Control Service, and a dummy media player,
from the topic-le-audio branch. This is a part of the upmerge of the
le-audio media control files.
This service has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the media proxy from the topic-le-audio branch.
This is a part of the upmerge of the le-audio media control files.
The media proxy adds a common API to register and access local media
players, and to discover and access remote media players over
bluetooth using the media control client and a remote media control
service.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the Media Control Client from the topic-le-audio
branch. This is a part of the upmerge of the le-audio media control
files.
This client has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- a macro for debug output of Object ID values has been (temporarily)
added to mcc.h, to avoid a dependency
- a blank line added after a declaration and an overlong line split,
to pass check_compliance
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Move the header file csis.h from the internal location to
the public include directory. This file is supposed to provide
the public API for CSIS and the CSIS client, but is not fully
complete yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) server.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When an CIS is connected, the peripheral did not have
any information about the QoS settings. This commit
adds information about the PHY and SDU. For some reason
the peripheral won't ever have information about the RTN.
The remaining values in the event (interval, delay and
latency) are still not exposed, nor is framing or
packing, the latter of which are not part of the event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
UUID values for the Content Control ID characteristic
The Content Control ID characteristic is a separately defined
characteristic used in the media control service and in the telephone
bearer service in LE Audio.
This commit is part of the upmerge of le-audio from the topic-le-audio
branch.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The commit adds helper macros for verification of disallowed
CTE types when periodic advertising synchornization is created.
The macros are added here, because they are directly related
with values specified by BT Core 5.1 specification.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Implemented host function for configuring vendor specific data path for
use with ISO, and fixed passing of path ID in setup.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This allows application to increase channel's MTU and (in some cases)
MPS. When channel gets reconfigured dedicated callback is called to
inform application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In some HCI packed structures we place non-packed structs inside (in
particular the address structs).
Alignment is not an issue for those because all their members are just
byte-aligned, but size is. If the compiler ever packs those it would
become a real problem, and so detect this at build time.
See the link below for more info:
https://stackoverflow.com/a/66389167
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a new struct that provides information to the upper
layer when accepting an connected isochronous stream.
The CIG ID and CIS ID makes it possible for the upper layer
to determine which ISO channels are "together" in a group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BT_ISO_SDU_BUF_SIZE which can be used to declare
the TX buffers for ISO, similar to the BT_L2CAP_SDU_BUF_SIZE
macro for L2CAP.
This also updates the ISO samples to use this as well
updating the SDU check to use
CONFIG_BT_ISO_TX_MTU/CONFIG_BT_ISO_RX_MTU without
subtracting the BT_ISO_CHAN_SEND_RESERVE to make the
API more clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The struct was declared twice (once as an opaque type) in
iso.h, but was unneeded. Removed to avoid confusion about
whether it is an opaque type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
AMP functionality was removed from the v5.3 specification. Remove
AMP-related macros since they no longer map to anything in the spec
itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add #defines for the maximum and minimum allowed values for object
IDs.
Moves the #define for the directory listing object ID to the public
header file
Having these limits available is useful for applications wanting to
ensure they pass in (or handle) valid object ID values.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Object IDs are 48 bits, but are often carried in uint64_t variables.
This commit defines a mask value that retains the least significant 48
bits.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sent callback to bt_iso_chan_ops so that the application
can be notified when an SDU has been sent. This can help the
application decide whether to queue up multiple, or only
have a single ISO PDU enqueue for reduced latency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The HCI spec defines the BIS index range as starting from
index 0x01. We had previously implemented it such that it
starts from 0x00, and then simply adding 1 to the index
when sending over HCI. However, this may cause issue with
other HCI, or other SIG defined specification, commands
and events, and thus it is probably simpler if we just
use the HCI defined range.
This commit disallows BIT(0) (representing the BIS
index 0x00) to be set, and removes the addition
of 1 when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
