To debug hard-to-reproduce faults/panics, it's helpful to get the full
register state at the time a fault occurred. This enables recovering
full backtraces and the state of local variables at the time of a
crash.
This PR introduces a new Kconfig option, CONFIG_EXTRA_EXCEPTION_INFO,
to facilitate this use case. The option enables the capturing of the
callee-saved register state (r4-r11 & exc_return) during a fault. The
info is forwarded to `k_sys_fatal_error_handler` in the z_arch_esf_t
parameter. From there, the data can be saved for post-mortem analysis.
To test the functionality a new unit test was added to
tests/arch/arm_interrupt which verifies the register contents passed
in the argument match the state leading up to a crash.
Signed-off-by: Chris Coleman <chris@memfault.com>
This adds the necessary bits in arch code, and Python scripts
to enable coredump support for ARM Cortex-M.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This had been copy-pasted between linker scripts, create
a central header for it.
The linker scripts for xtensa and posix have very different
structure and have been left alone.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add api to raise SGI to target cores in affinity level identified
by MPIDR. Currently only EL1S is supported.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit removes the header shims introduced after AArch32/64
re-organisation in the commit d048faacf2.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use device tree provided configurations for arm architecture timer
PPIs.
This fixes issue of timer ppi not working on most hardware where
edge-triggered PPI are not supported.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
fix bss section be copy to binary.
When compiling with non-xip.
All sections will be placed in the ram.
If NOBITS section isn't placed at the end of ram,
objcopy will placed these section to binary file.
The modify only for no-userspace.
In userspace the section will be adjust,
kobject_data size increase,
the bss be shifted, the content of kobject_data
will no mactch to kernel obj of bss.
Signed-off-by: Frank Li <lgl88911@163.com>
This commit cleans up the section name definitions in the linker
sections header file (`include/linker/sections.h`) to have the uniform
format of `_(SECTION)_SECTION_NAME`.
In addition, the scope of the short section reference aliases (e.g.
`TEXT`, `DATA`, `BSS`) are now limited to the ASM code, as they are
currently used (and intended to be used) only by the ASM code to
specify the target section for functions and variables, and these short
names can cause name conflicts with the symbols used in the C code.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add __DSB system wide berrier.
Move the barrier macros to inline function header.
TODO: add more granular oneway barriers.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert various DT_CCM_* macros to use DT_CHOSEN(zephyr_ccm) and
associated macros from devicetree.h.
We remove CCM references from cortex_a and cortex_r linker scripts as
its only a feature on Cortex-M STM32 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert various DT_DTCM_* macros to use DT_CHOSEN(zephyr_dtcm) and
associated macros from devicetree.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit reworks the ARM AArch32 non-Cortex-M (i.e. Cortex-A and
Cortex-R) exception handling to establish the base exception handling
framework and support detailed exception information reporting.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds an "extension" header for the CMSIS to provide the
core register access functions and macros that are not currently
available in the CMSIS.
The functions and macros defined in this header should be eventually
added to the upstream CMSIS and, once added, removed in this header.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Zephyr being an OS is typically expected to run at EL1. Arm core
can reset to EL3 which typically requires a firmware to run at EL3
and drop control to lower EL. In that case EL3 init is done by the
firmware allowing the lower EL software to have necessary control.
If Zephyr is entered at EL3 and it is desired to run at EL1, which
is indicated by 'CONFIG_SWITCH_TO_EL1', then Zephyr is responsible
for doing required EL3 initializations to allow lower EL necessary
control.
The entry sequence is modified to have control flow under single
'switch_el'.
Provisions added by giving weak funcions to do platform specific
init from EL3.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
The return value of the interrupt is never used, so remove the
functionality from the API. We ripple this change into the
ARCH_IRQ_CONNECT and ARCH_IRQ_DIRECT_CONNECT implementations. With
this change we can also remove the compound expression as that is
not needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_IRQ_PRIO_BITS defined in every
dts_fixup.h we can just handle the few variant cases in irq.h. This
allows us to remove DT_NUM_MPU_REGIONS from all the dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The current context preservation implementation saves the spsr and
lr_irq registers, which contain the cpsr and pc register values of the
interrupted context, in the thread callee-saved block and this prevents
nesting of interrupts because these values are required to be part of
the exception stack frame to preserve the nested interrupt context.
This commit reworks the AArch32 non-Cortex-M context preservation
implementation to save the spsr and lr_irq registers in the exception
stack frame to allow preservation of the nested interrupt context as
well as the interrupted thread context.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In the current implementation both SPSR and ELR registers are saved with
the callee-saved registers and restored by the context-switch routine.
To support nested IRQs we have to save those on the stack when entering
and exiting from an ISR.
Since the values are now carried on the stack we can now add those to
the ESF and the initial stack and take care to restore them for new
threads using the new thread wrapper routine.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
These shims should be removed after two releases.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_arm_exc_exit (z_arm_int_exit) requires the current execution mode to
be specified as a parameter (through r0). This is not necessary because
this value can be directly read from CPSR.
This commit modifies the exception return function to retrieve the
current execution mode from CPSR and removes all provisions for passing
the execution mode parameter.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch64 interrupt system relies on the multi-level
interrupt mechanism and the `irq_nextlevel` public interface to invoke
the Generic Interrupt Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the ARMv8 cores (e.g. Cortex-A53)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by mapping the architecture interrupt control functions
to the SoC layer interrupt control functions when
`ARM_CUSTOM_INTERRUPT_CONTROLLER` configuration is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch32 (Cortex-R and to-be-added Cortex-A) interrupt
system relies on the multi-level interrupt mechanism and the
`irq_nextlevel` public interface to invoke the Generic Interrupt
Controller (GIC) driver functions.
Since the GIC driver has been refactored to provide a direct interface,
in order to resolve various implementation issues described in the GIC
driver refactoring commit, the architecture interrupt control functions
are updated to directly invoke the GIC driver functions.
This commit also adds support for the Cortex-R cores (Cortex-R4 and R5)
that allow interfacing to a custom external interrupt controller
(i.e. non-GIC) by introducing the `ARM_CUSTOM_INTERRUPT_CONTROLLER`
configuration that maps the architecture interrupt control functions to
the SoC layer interrupt control functions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the z_arm_int_lib_init() function to
z_arm_interrupt_init(), aligning to how other
ARCHes name their IRQ initialization function.
There is nothing about 'library' in this
functionality, so we remove the 'lib' in-fix.
The commit does not introduce any behavior changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add zephyr execution regions(text, rodata, data, noinit, bss, etc.)
with proper attributes to translation tables.
Linker script has been modified a little to align these sections to
minimum translation granule(4 kB).
With this in place, code cannot be overwritten accidently as it is
marked read only. Similarly, execution is prohibited from data/RW
section as it is marked execute-never.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Add MMU support for ARMv8A. We support 4kB translation granule.
Regions to be mapped with specific attributes are required to be
at least 4kB aligned and can be provided through platform file(soc.c).
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Following changes are done:
- The vector table should be placed in text segment.
- Removed Vector relay table related entries as it is
only applicable to aarch32.
- irq_vector_table contains ISR pointers - should be placed
in rodata segment.
- put openocd_dbg in rodata and skip adding <linker_relocate.ld>
as CONFIG_CODE_DATA_RELOCATION is not defined for aarch64
currently (add later if needed).
Fixes: #22673
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
plt and got sections are used for dynamic linking which
is not supported in Zephyr.
Reference: #11953
commit 3ba7097e73 ("linker: add orphan sections to linker script")
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
We introduce a macro to define the IRQ priority level for
PendsV, and use it in arch/arm/include/aarch32/exc.h
to set the PendSV IRQ level. The commit does not change
the behavior of PendSV interrupt.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
