It is convenient to have a blocking version of
`mqtt_read_publish_payload` function, for cases when it is called from
the event handler. Therefore, extend the 'mqtt_read_publish_payload'
argument list with information whether the call should block or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Inside function test_net_pkt_basics_of_rw result of function call
net_pkt_read_be16 is not checked which might result performance
of the program and cause errors.
Coverity-CID 198003
Fixes#15776
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Fixes the compile errors in various platforms like:
* sam_e70_xplained (too few network buffers)
* galileo, cc3220sf_launchxl and mps2_an385 (missing random number
generator configuration options)
Fixes#15878
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_if_ipv6_calc_reachable_time() requires sys_rand32_get().
Enable the test random number generator so the build doesn't
fail.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As the getaddrinfo() test is suppose to be self contained, then
we will need to install handler for the sent DNS query. After we
receive the query in process_dns() thread, we verify that the
query was sent properly. We do not return DNS reply back to
the caller in this case as we do not want to create DNS server
just for this simple test application. This can be changed later
if we get DNS server functionality in Zephyr network stack.
Fixes#15193
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ipv6_fragment tests registered log module but still use DBG
macro of printk. Replaced them with NET_DBG.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Write the net_pkt using net_pkt_write() and then verify that the
data is actually written into net_buf.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need all the socket APIs to work from user mode.
tests/net/socket/misc now runs in userspace.
Fixes: #15227
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test is designed to run in user mode, but was disabled
for some reason.
Re-enable, and add mps2_an385 to the whitelist as this is
the QEMU target that emulates an MPU.
Fixes: #15228
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various globals for the test cases have been moved to
the ztest memory domain data section via ZTEST_DMEM tags
so that user mode can access them.
Some anonymous arrays whose address was being placed in
the msg_subackX structs have been split out so they
are in ztest memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test case added for IPv6 neighbors. This will add more than
CONFIG_NET_IPV6_MAX_NEIGHBORS neighbors. Network stack should
remove oldest neighbor which is in STALE state and it should
add new neighbor. So call to net_ipv6_nbr_add() should succeed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch checks the return value after updating the packet.
Fix Bugs: #14821
Coverity CID: 196635
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't depend on CONFIG_NET_SOCKETS_POSIX_NAMES being defined (e.g.,
it's going to conflict with POSIX API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195844
Fixes#14405
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195880
Coverity-CID: 195816
Fixes#14413Fixes#14395
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If pkt allocation fails, then prepare to handle NULL pointer.
Coverity-CID: 195835
Fixes#14409
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
If the rc = -EAGAIN from mqtt_read_publich_payload(), it shouldn't be
used in memcpy() since it is a negative value, and instead, it should
try to read again.
Fix: #13825
Coverity-CID: 191002
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Use the new net_pkt allocator. Fix a small leak in the test as well.
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The very first test was basically testing the checksum calculation. And
that's already tested in more relevant tests. It was also trying in a
cumbersome way to generate packets scattered over many net_buf. But
that's also already tested in various other tests, and it's not at all
part of core utils anyway.
In any case, that all redundant, so let's remove it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the data directly through
net_context_sendto_new()
Use the new net_context option to enable timestamping of outgoing
packet (NET_CONTEXT_TIMESTAMP).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
