The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds stubs for Core Unregister Service command implementation.
It will be used to clean up the stack and tester after test case
execution.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes data passed to the BTP Device Found event.
Change-Id: I1ab465b87ce24f3ea10b7217c254aafaee494c91
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BTP API allows to set only advertising and scan response data without
declaring advertising type. Advertising type is deduced from current
flags status. Scan response data is static in tester - to set non
connectable mode in current BTP API scan response length must be
considered.
Change-Id: I742cd8ec774c24f317d639835844a4743bb25445
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
GAP_CONNECT bit was missing in supported commands.
Change-Id: I9d009c55327ae67bed38c45b7c11fb67665e1cd0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes opcodes to be in the sequence.
Supported commmands is form now uint8_t array, so this resolves
the problem with endianess as well.
Change-Id: I602a58081948dbbf5e0d83cbb12a118a5990b9f8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
