As printf() is now used directly instead of printf proxy function,
there's warning-as-error that long long is passed where %lu
expected, so cast it explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It exists only if MBEDTLS_PLATFORM_PRINTF_ALT is defined, whcih we
no longer do, but make the call condiitonal in case we'll need to
make it configurable later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We were running this as a test and not evluating the output. Now we
verify the output and stop treating this as a ztest item.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The results were incorrect because the timer was firing the
interrupts before the measurement was made.
Fixes: GH-14556
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Those are outdated and unrunnable tests that require lots of
customization to keep them building and the information they provide
can't be retrieved in other means.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Useful tool for performance work that removes interaction with other
APIs and thread state. The best part is that it doesn't rely on timer
interrupt delivery and so works with -icount even on existing qemu
versions and produces deterministic output.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's worth using custom timing information on a few systems to save
cycles or gain precision. But make the use of k_cycle_get_32() a
proper default instead of hardcoding all the platforms and failing to
build on new ones. On Xtensa and RISC-V (and now x86_64) the cycle
informatoin from that call is a very fast wrapper around the native
counters anyway -- all you would save would be the function call
overhead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The constant NSEC_PER_USEC is already defined in sys_clock.h, there is
no need to define it here.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
These tests was written to try to eliminate timer interrupts, but the
mechanism chosen (setting TICKS_PER_SECOND to 1) is dangerously
susceptible to overflow conditions on systems with fast cycle counters
and high timeout durations.
Actually the tests pass just fine if you use a conventional tick rate
and use a tickless-capable driver (which eliminates interrupts too,
which is the whole point), but there's no easy way in kconfig to do an
"if" to select that condition for capable systems only. Just disable
tickless to keep the same behavior.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that the API has been fixed up, replace the existing timeout queue
with a much smaller version. The basic algorithm is unchanged:
timeouts are stored in a sorted dlist with each node nolding a delta
time from the previous node in the list; the announce call just walks
this list pulling off the heads as needed. Advantages:
* Properly spinlocked and SMP-aware. The earlier timer implementation
relied on only CPU 0 doing timeout work, and on an irq_lock() being
taken before entry (something that was violated in a few spots).
Now any CPU can wake up for an event (or all of them) and everything
works correctly.
* The *_thread_timeout() API is now expressible as a clean wrapping
(just one liners) around the lower-level interface based on function
pointer callbacks. As a result the timeout objects no longer need
to store backpointers to the thread and wait_q and have shrunk by
33%.
* MUCH smaller, to the tune of hundreds of lines of code removed.
* Future proof, in that all operations on the queue are now fronted by
just two entry points (_add_timeout() and z_clock_announce()) which
can easily be augmented with fancier data structures.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This just got turned into a function from a "variable" API, but
post-the-most-recent-patch it turns out to be degenerate anyway.
Everyone everywhere should always have been using the kconfig variable
directly, and it was only a weirdness in the tickless API that made it
confusing. Fix.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add ifdef guard to the z_reset_timeslice() to fix compilation
errors when CONFIG_TIMESLICING is disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It is no longer necessary to set the KCONFIG_ROOT variable when the
KConfig file is in the application root directory.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The total number of loops being executed were taking far too long
to finish executing the test case. This was causing the timer handler
to execute in the middle of the test case. Thereby causing a test case
failure.
Now the number of loops have been reduced and this will make sure the
test case completes.
This change has no effect on the time being calculated by the
benchmark.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In NRF52 we need to write to a capture register to retrieve the current
counter value. This was missing for userspace implementation.
Fixes: GH-9676
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Few SoCs whose clock speed is very less will cause multiple ticks
to occur for 1 sec of sleep. For such a platform we cant run
the loops for over 5000 because the tick handler will get executed.
Thus rendering the test useless for such platforms. By reducing
the number of iterations we get the required benchmark results.
Fixes: GH-7906
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from nios2 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
