on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The compiler was generating errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef] when -Wundef is used and the config option was turned
off. Change check to ifdef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The ARM Cortex-M Exception Stack Frame (ESF) may consist of
several stack frame contexts (basic state context, additional
state context, FP context, etc.). To reflect these structural
properties, this commit re-factors the ESF, splitting out the
basic stack frame, holding the state context, into its own
struct container. The commit does not introduce behavioral
changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not stacking the
FP context in exception entries, so we do not need to
include the FP registers bank in the exception stack
frame structure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The size of the ROM region is now rounded up to the
nearest power of two; we no longer assume that RAM
is in a different part of memory.
Fixes: #15558
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is used to have each arch canonically state how much
room in the stack object is reserved for non-thread use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ARM Cortex-M 321 application note is stressing that if
we disable interrupts by executing CPSID i(f), or by MSR
instructions (on PRIMASK, FAULTMASK registers), there is no
requirement to add barrier instructions after disabling
interupts. However, in ARMv7-M (and ARMv8-M Mainline) we use
BASEPRI, instead. Therefore, if we need the effect of disabling
interrupts to be recongnized immediately we should add barrier
instructions. This commit adds DSB and ISB barriers when
disabling interrupt using BASEPRI in the generic
arm _irq_lock() function as well as in the PendSV handler,
where we need to access kernel globals right after the interrups
are disabled.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
(OPTIONAL) was a vestiage from the initial import of the Zephyr code
base and we dont utilize it with the GNU linker. Additionally, the way
(OPTIONAL) gets defined to nothing creates a linker script that lld
(from llvm) doesn't like.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The clang ARM assembler is a bit stricter than GNU as. Change mov to
movs for ARMv6 case of Z_ARCH_EXCEPT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit enhances the documentation of z_arch_buffer_validate
describing the cases where the validation is performed
successfully, as well as the cases where the result is
undefined.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The app_smem.ld is also being used by architectures other than ARM.
So move the linker script out of include/arch/arm and into
include/linker.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The ARM Cortex-M 321 application note is stressing that
when enabling interrupts by executing CPSIE i(f), or by MSR
instructions (on PRIMASK, FAULTMASK, or BASEPRI registers),
there is a need for synchronization barrier instructions,
if there is a requirement for the effect of enabling
interrupts to be recongnized immediately. _arch_irq_unlock()
is invoked in several places, therefore, we add the
barriers to make the interrupt enabling function
applicable to all usage scenarios.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This commit corrects and improves the documentation for the
convenience macro _ARCH_THREAD_STACK_SIZEOF(sym). It stresses
that the returned size is guaranteed to match the amount of
stack that is available for the thread, that is, excluding any
areas not directly usable, e.g. a Stack Guard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors the MPU region re-programming functions,
to take as argument an array of pointers to memory partition
structures, instead of the whole array of the partitions. In
this way the stack usage can be minimized, if the actual
partition information is kept in statically allocated memory.
instead of the map itself.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The GCOV section is programmed as a static MPU region, only
in builds with support for User Mode, otherwise it is not
programmed into an MPU region at all. To reflect this in the
linker, the MPU-alignment for GCOV section is enforced only
under CONFIG_USERSPACE=y. Otherwise, single-word alignment
is enforced.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of having to enable ramfunc support manually, just make it
transparently available to users, keeping the MPU region disabled if not
used to not waste a MPU region. This however wastes 24 bytes of code
area when the MPU is disabled and 48 bytes when it is enabled, and
probably a dozen of CPU cycles during boot. I believe it is something
acceptable.
Note that when XIP is used, code is already in RAM, so the __ramfunc
keyword does nothing, but does not generate an error.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Using __ramfunc to places a function in RAM instead of Flash.
Code that for example reprograms flash at runtime can't execute
from flash, in that case must placing code into RAM.
This commit create a new section named '.ramfunc' in link scripts,
all functions has __ramfunc keyword saved in thats sections and
will load from flash to sram after the system booted.
Fixes: #10253
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Slightly enhance the build-time ASSERT rule for memory
partitions sanity on ARMv8-M platforms, to check,
additionally, for proper (32-byte) alignment of the start
address.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Since we know do DTS before Kconfig we should try and remove dts from
creating Kconfig namespaced symbols and leave that to Kconfig. So
rename CONFIG_CCM_<FOO> to DT_CCM_<FOO>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_APPLICATION_MEMORY doesn't exist anymore, so the bit of code in
arm_core_mpu_dev.h related to it is dead and should be removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* K_APP_DMEM_SECTION/K_MEM_BMEM_SECTION macros now exist
to specifically define the name of the sections for data
and bss respectively.
* All boards now use the gen_app_partitions.py script, the
padding hacks for non-power-of-two arches didn't work right
in all cases. Linker scripts have been updated.
* The defined k_mem_partition is now completely initialized
at build time. The region data structures now only exist
to zero BSS.
Based on some work submitted by Adithya Baglody
<adithya.baglody@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replace Cortex-M3 with Cortex-M architecture family
in the header documentation of kernel_arch_data.h and
kernel_arch_func.h, which are generic header files for
the entire familty of ARM Cortex-M CPUs. The commit
adds some more minor style fixes in functions'
documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the documentation of internal ARM core
function _arch_irq_lock(..), adding a more detailed description
of its impact on the different Cortex-M processors.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-works the NXP MPU driver implementation so that
it aligns with the implementation for ARMv7-M and ARMv8-M MPU
architectures.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the unnecessary MPU region type definitions
from arm_core_mpu_dev.h, as they are not used any more in any of
the architecture-specific MPU implementations (ARMv7-M, NXP, and
ARMv8-M MPU).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes obsolete ARM CORE MPU API definitions
and related implementation from arm_mpu.c, in the wake of
the transition to the new ARM MPU design.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit updates the ARM Core MPU API for memory domains,
to align with the principle of de-coupling the partitioning
and the access attribution with the architecture-specific
MPU driver implementation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces an internal ARM MPU API that allows the
user to re-configure a memory partition in run-time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces an ARM API that allows the user to
program a set of dynamic MPU regions at run-time. The API
function is invoked every time the memory map needs to be
re-programmed (for example at thread context-switch). The
functionality is implementated in arm_core_mpu.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces and documents the internal ARM MPU
API to configure the dynamic memory regions at run-time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces and documents the internal ARM MPU
API to configure the static memory regions at boot time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The ARM core MPU API now uses solely k_mem_partition_attr_t
objects to represent memory region attributes. The objects
now include all attribution properties (including cache-
ability and share-ability). This commit updates the macro
definitions to comply with the new ARM Core MPU standard.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the generic ARM (core) API, which allows
the user to program a set of static (fixed) MPU regions at boot
time. The API function is invoked upon initialization, in the
ARM-specific call of _arch_switch_to_main_thread(). The API
implementation is provided in arm_core_mpu.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from ARM SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add missing sections being reported as orphan with latest compiler
version for x86 and discard them. Do the same on ARM.
Those sections are used for dynamic linking which we do not support in
Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
