Enable Zephyr device runtime power management mechanisms in Intel SSP
driver. This allows Zephyr to track usage reference for power
domain gating.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
All IEEE 802.15.4 tests/samples use DT-based filter now, so the
ieee802154 tag can be deleted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove usage of CONFIG_NET_CONFIG_IEEE802154_DEV_NAME as it now works
with DT based choice.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove Kconfig choice for IEEE802154. In this case, there's no in-tree
board, so there's no overlay or board to be updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the choisen zephyr,ieee802154 from DT as
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the choisen zephyr,ieee802154 from DT as
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make a library out of the zperf shell sample. This makes to enable the
module in any application, not only the dedicated sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Exclude the non-secure TF-M application from being built by TF-M.
This also stops the building of the tfm_ns_api library that we were
linking against.
This library is defined by the tf-m regression tests.
Add the installed interface source files exported by the TF-M build
system compile them in the zephyr build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
RT1050 and RT1060 were selecting an invalid number of RX/TX buffers
(below the allowed default). Raise this value for the gptp sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
enable hardware acceleration of ethernet checksum calculation for
RT1050 and RT1060
Performance change (as tested with iperf on RT1050)
TCP RX: 50.6Mbps->52.4Mbps
TCP TX: 49.5Mbps->50.2Mbps
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use systick timer for RT1050 to provide better performance than low
frequency GPT timer
Performance change (as tested with iperf on RT1050)
TCP RX: 49.1Mbps->50.8Mbps
TCP TX: 40.8Mbps->46.2Mbps
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Have the display enabled in devicetree will now get the driver
enabled by default when CONFIG_DISPLAY=y is set. So we can remove
setting driver enabling Kconfig values in various .conf and
defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
The accel_polling sample application supports the adxl372 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The accel_polling sample application supports the adxl362 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This defaults the TF-M regression tests to isolation level 2.
It is set in order to showcase a more secure configuration
by default. The default behavior of the sample is changed in
the prj.conf file. The yaml file which includes the test cases
enables testing for the three configurations: the library mode,
the IPC mode isolation level 1 and the IPC mode isolation level 2.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Default size of BT_RX_STACK_SIZE 1024 is not enough for this sample.
Increase it to prevent stack overflow.
Signed-off-by: Pirun Lee <pirun.lee@nordicsemi.no>
The preferred ipc service on NRF platforms is ipc_service. Remove
configuration for rpmsg_service and just utilize ipc_service.
Signed-off-by: Kumar Gala <galak@kernel.org>
Building for native_posix_64 exposes faulty format strings.
Changes in this commit also ensure that the shell code gets built in CI,
thus this kind of problem can not be introduced again later on.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Remove sample as its only supported on one platform, should really
utilize the ipc subsystem, and so forth.
For now its better to drop it and when we have something better we
can add that.
Signed-off-by: Kumar Gala <galak@kernel.org>
All IEEE 802.15.4 drivers are now automatically enabled if they are
'okay' in DT and all of its dependencies are 'y', including
CONFIG_IEEE802154. This means individual driver enablement is not
necessary anymore in Kconfig.defconfig files or samples/tests. Boards
need to still make sure any dependencies are enabled, e.g. SPI bus in
some cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The magic_want sample requires I2C bus to be enabled (used sensor is
connected to the bus).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a polling sample for 3-Axis accelerometers.
This sample demonstrates how to data fetch and print to the console.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Small update to have the central_multilink sample work correctly
with extended advertising (when enabled)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
samples should not use CONFIG_TEST_EXTRA_STACK_SIZE, instead, they
should set the recommended stack size directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For further details about interoperability testing please see
* https://lwm2m.openmobilealliance.org/ - Test V1.1 12-Sep-2019
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Make sure that the network interface is up before running the sample.
Otherwise, the sample could stop rightaway due to send failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
First off, fix the FD check when closing a socket - currently not all
sockets were closed on exit (0 is also a valid file descriptor).
Second issue is the use of k_thread_abort() on tx/rx threads. The
receving thread was blocked in recv(), and aborting its thread prevented
it from ending gracefully (i. e. the socket mutex allocated in recv()
was not released as the function did not exit properly). This resulted
on a consecutive `close()` call lock. Fix this by setting a timeout on a
receiving socket, and instead of aborting threads allowing them to exit
gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The sample has been defining STORAGE_NODE_LABEL to be used
to point to storage partition, but flash_area_offset has still
been using "storage" directly.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Provide common helper functions to create extended extended Zephyr
Fatal Error functionality in HCI common code.
Use the implementation in hci_rpmsg sample.
The sample didn't provide an information about Controllers assert
or system fatal error to an application code while run with nRF5340
SoC. The goal for hci_rpmsg sample change is to enhance user experience
for conformance testing of the Bluetooth Controller while executed with
nRF5340.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The unicast audio server sample did not set a location value,
and would report an invalid value of 0 when read.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds sample application that can be used as reference
implementation and for HAP qualification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move from using Kconfig GDBSTUB_SERIAL_BACKEND_NAME to a devicetree
chosen property ("zephyr,gdbstub-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Sample has been referencing flash area by its label, but flash device
by chosen `zephyr,flash-controller`, while flash area does not have
to be positioned on a device selected by the chosen directive.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
