The Bluetooth address constants (BT_ADDR[_LE]_ANY, BT_ADDR[_LE]_NONE)
are currently defined as the address of the local anonymous structs
that are initialised to the corresponding address values, and assigning
them to a variable whose scope is greater than that of a function may
end up creating dangling pointers (for instance, as done in the
`bt_conn_get_info` function).
This commit defines the Bluetooth address constants as global constant
variables that are placed in the read-only data section, and modifies
the Bluetooth address constant macros to use the address of these
variables instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `const` qualifier to the `addr` parameter of the
`bt_monitor_new_index` function because this parameter is and should
never be modified within this function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `const` qualifier to the `addr` parameter of the
`find_sc_cfg` function because this parameter is and should never be
modified within this function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Fix regression in overlapping 1M and Coded PHY scan window
by considering rounding margins when checking for same
interval and same window durations.
Relates to commit c14bde45b6 ("Bluetooth: Controller: Fix
overlapping 1M and Coded PHY scannning").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The unicast_client_pacs_avail_ctx_notify_cb had a direction
check that was a leftover copy from the location notification.
However the context notification is always for both sink and
source, and thus does not need any direction checks (in fact
the dir variable was unused).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes invalid check, which is redundant in fact as the length
is already checked in ascs_parse_metadata function.
The check be test 'greater than' only, as 'equal' condition is valid.
Moreover this fixes return value from ascs_verify_metadata function.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Swaps response scheme for Fault_test command so that it
aligns with description of the documentation.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
When AD data length of greater than 191 bytes support is
enabled then default to using the back-to-back PDU chaining
feature in the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising and Periodic Advertising's parent
PDU's aux ptr field to contain correct aux offset value to
its chain PDU.
Uninitialized pointer reference to aux ptr in the parent PDU
was used before the pointer reference was returned by the
function adding the aux ptr fields in the parent PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use local variable to update current PDU's Common Extended
Header Format flags instead of updating it directly in the
PDU buffer. This is required to be able to non-destructively
be able to manipulate the PDU's header flags and contents
many time before a final commit of the updated PDU.
In order to calculate overflowed AD data length, PDU is
manipulated couple of times to determine the overflow length
and next to be able to add aux ptr field when chain PDU is
appended.
The changes are now consistent with how Periodic Advertising
PDU's Common Extended Header Format is manipulated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in adding ADI in scan response PDU introduced
in implementation adding support for AD data fragment
operation.
Setting scan response data with ADI failed with too long
data error. This was caused by a bug in calculating the
offset to the overflow length returned back by the call
to set_clear function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds missing feature so that the config client is able to receive
odd number of app index entries.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
The commit is a minor refactor of the common Host and Controller
Kconfig. There were used "default n" that should be avoided.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In case Controller reports to Host insufficient resources to store IQ
samples, according to BT 5.3 Core spec. Vol 4, Part E, sections
7.7.65.21 and 7.7.65.22:
1) packet_status shall be set to BT_HCI_LE_CTE_INSUFFICIENT_RESOURCES
2) sample_count shall be set to zero.
That means there should be no IQ samples stored in IQ report.
HCI implementation stored single IQ sample with value BT_HCI_LE_CTE-
_REPORT_NO_VALID_SAMPLE.
The commit fixes that. No additional memory is added to event buffer
and no IQ sample is stored if sample_count is zero.
Also there is added code that handles situation where ULL provides
IQ report with packet_status indicating valid IQ samples report
but sample_count is zero. In such case Host event stores single IQ
sample with value BT_HCI_LE_CTE_REPORT_NO_VALID_SAMPLE.
In case of vendor specific counter part of the event the value is
BT_HCI_VS_LE_CTE_REPORT_NO_VALID_SAMPLE.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Bluetooth Controller has a vendor specific extensions that allows it
to send IQ report events with IQ samples that are 8 bits or 16 bits
signed integer. To use that functionality, there is added common
handler of vendor specific events.
Vendor specific events handling is prioritized to be done by user
provided event handler. If that is not available, then Host generic
implementation enters.
Added vendor specific events that are handled by common Host code
are BT_HCI_EVT_VS_LE_CONNECTIONLESS_IQ_REPORT and BT_HCI_EVT_VS_LE-
_CONNECTION_IQ_REPORT.
The only difference between regular IQ report events is size of
IQ samples, hence implementation of IQ report events is changed to
use the same user callback. To avoid differentiation of user callbacks
new member sample_type was added to bt_df_per_adv_sync_iq_samples-
_report. Also sample member is changed to be a union, to allow easy
access to IQ samples without type casting.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add vendor specific IQ samples report that holds IQ data in 16 bits
signed integer format. Thanks to that we preserve complete accuracy of
IQ samples provided by Nordic Direction Finding Extension in Radio
peripheral. That helps to maintain better accuracy of evaluated
angles with use of reported IQ samples.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
We had two bugs:
- we didn't check the subscription, only the fact that the passed chrc can
be subscribed to.
- that check only worked if we passed the chrc descriptor handle, not its
value handle.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This introduces a new option that allows the user to disable the
subscription checking when notifying or indicating.
Some users might have use-cases where they would like to send notifications
or indications without the peer having to go through the subscription
process, as that is allowed by the Bluetooth specification.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
To avoid compilation issues when including tbs.h header file when
CONFIG_BT_TBS_MAX_URI_LENGTH is not set, just pass the URI pointer
instead of an array in bt_tbs_client_call structure.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
If LPN loses Subscription List Add Confirmation it repeats
Subscription List Add frame. Friend doesn't check both
transaction number and presence addresses in the list.
That causes situation when Friend fills the same address
full list.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
With extended advertiser a precision of transmission becomes high.
The first frame is emitted quite quickly. The scanner latency
config option to enable scanner a bit in advance is not sufficient.
Sometimes replays on Friend Poll are lost.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The function will be used to update the RSI value. The returned value
can be later used in advertisement data for set identification. This
removes the need of specific bt_csis_advertise function so that the user
can call the API to generate new RSI once needed (e.g. on RPA change).
This allows the user to manage the advertisement data to fit it's needs.
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 33
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x1d
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Unknown EIR field 0x2e: 16e61d64dc45
Name (complete): audio test shell
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 4E:21:29:F8:94:93 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When sending an ATT packet, do not just try to send the first packet in
the queue, but find the first one that can be sent using the channel.
This makes sure that eg. packets that shall be sent on an unenhanced ATT
channel are not blocked by packets that shall be sent on enhanced ATT
channels.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
bt_eatt_connect was documented to return -EINVAL if conn is NULL, but
this was not the case. Instead it lead to undefined behavior.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Disallow trying to send requests or notifications on only EATT channels
if no EATT channels are connected or the link is not encrypted. In these
cases the operation will always fail, so it should not be queued.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
A channel option field has been added to the bt_gatt_*_params structs.
This allows the application to choose wether Unenhanced ATT, Enhanced
ATT, or Any ATT channel shall be used for the
request/command/indication/notification.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Initialize monitor UART device at compile time so that device pointer
can be constified.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This new option prevents the Host from using Controller-provided
identity roots. This potentially increases privacy.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Move the flagging of `BT_DEV_STORE_ID` to a separate if-statement.
This clarifies the meaning of the code, and paves way for wrapping the
if-statement with the call to `bt_smp_irk_get` in another conditional.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When registering VOCS callbacks via bt_vcs_client_cb_register
it could fail if the application did not reset the
vocs_cb.discover as that is set internally.
This commit adds a simple check to also allow the
vocs_cb.discover to be the callback VCS expect/want it to be.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When registering AICS callbacks via bt_vcs_client_cb_register
or bt_micp_mic_ctlr_cb_register it could fail if the application
did not reset the aics_cb.discover as that is set internally.
This commit adds a simple check to also allow the
aics_cb.discover to be the callback they expect/want it to be.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_csis_lock would call write_set_lock with `attr` set to
NULL, which was dereferenced to get the bt_csis instance.
This commit modified the functions such that we instead have
common function to handle changes to the lock value, called
from either the GATT write callback function, or the
bt_csis_lock, so that we have a clearer separation of what
the individual functions do.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds client support for switching the active preset along with bsim
tests implementation.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The unicast client would simply reset all existing ISO QoS
when there was a state change to the QoS state (and only
update the stream QoS).
This caused issue with some ISO check later, as well
as wrongly resetting the data path too.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Verify that the HCI ISO data packet is smaller than
the maximum SDU size we support, based on the group
settings.
Since we do not yet support fragmentation we also
verify that the data length is smaller than the
HCI ISO buffer size.
For the ISO peripheral is it not possible to know
the SDU, and we are forced to not send any value larger
than the PDU size.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Per the HCI spec it is not possible to send the
HCI_LE_Create_CIS command while an outstanding request
is pending. To avoid failing the command we can
check and verify if any ISO connections are in the
pending state.
Since multiple ISO channels can be connected
in a single request, the solution implemented was
to iterate over all ISO connections and see if there was
any unicast ISO channels in the connecting state.
It also checks for the encryption pending state, as
we should not start the encryption procedure if we know
that the connect ISO command cannot be completed afterwards.
This adds a new return value to bt_iso_chan_connect,
and decided to properly document the return values the
function can return.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT is defined by default and the
value ranges from 1 to 255.
So, checking if this parameter is defined seems to be redundant
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Swaps response scheme for Fault_get & Fault_clear command so that it
aligns with description of the documentation.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
MCC need to check characteristic properties before subscribe as not all
MCS characteristics support notify.
Signed-off-by: Hang Fan <fanhang@xiaomi.com>
