If/when "zephry,entropy" is enabled CONFIG_ENTROPY_GENRATOR is
automatically enabled, therefore enabling the corresponding
platform entropy driver. On some platform this is a problem
because the entropy driver is not used directly as random
source, but only to seed the ctr-drbg algorithm provided
by Mbed TLS. Unfortunately CONFIG_MBEDTLS_CIPHER_MODE_CTR_ENABLED
cannot be directly enabled because CONFIG_MBEDTLS_CFG_FILE used
in mcuboot is different from the "config-tls-generic.h" which
is required to use Kconfig symbols defined in
"zephyr/modules/mbedtls/Kconfig.tls-generic".
Moreover entropy and random number generators are not required
in mcuboot because signature verification is a
deterministic operation.
In conclusion this commit disables "zephyr,entropy" in
mcuboot DTS overlay file.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Implement a sample app to perform basic GPIO tracing.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
If GPIO tracing is enabled, then the system will track
various GPIO pin events.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
Rename "nxp,kinetis-wdog32" compatible to "nxp,wdog32" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Removed implying of NVS by the NET_L2_OPENTHREAD, and from now a
platform can choose between ZMS and NVS as a settings backend.
NET_L2_OPENTHREAD still requires NVS or ZMS backend so the config
depends on one of those.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
add display type for fixtures to avoid conflcts
in NXP platform
1. add required regex for console harness.
2. add message after processing, ensure the flow is OK
3. reduce the test time in TEST mode
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Move "bluetooth" tag and harness from the common section
of the smp_svr sample.yaml file to "bluetooth" specific test cases.
Signed-off-by: Andrej Butok <Andrey.Butok@nxp.com>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add a function similar to sample_usbd_init_device(), but one that does
not initialize the device. It allows the application to set additional
features, such as additional descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Obviously, everyone knows that there are 8 bits per byte, so
there isn't a lot of magic happening, per se, but it's also
helpful to clearly denote where the magic number 8 is referring
to the number of bits in a byte.
Occasionally, 8 will refer to a field size or offset in a
structure, MMR, or word. Occasionally, the number 8 will refer
to the number of bytes in a 64-bit value (which should probably
be replaced with `sizeof(uint64_t)`).
For converting bits to bytes, or vice-versa, let's use
`BITS_PER_BYTE` for clarity (or other appropriate `BITS_PER_*`
macros).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Change downlink callback to transport data using flags.
Related to Issue #55072
Co-authored-by: Jan Kowalewski <jkowalewski@cthings.co>
Signed-off-by: romain pelletant <romainp@kickmaker.net>
Signed-off-by: Jan Kowalewski <jkowalewski@cthings.co>
'nrf52840dk/nrf52840' is already listed under "generic" 'sample.dap.bulk',
so keeping 'sample.dap.bulk.nrf' has no value. The only difference is
dependency on 'gpio' instead of 'arduino_gpio', but
'nrf52840dk_nrf52840.overlay' references arduino header gpios only.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fixes overlay-udp.conf build for platforms without TRNG.
- adds TEST_RANDOM_GENERATOR, as for most network samples.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Coverage for cmsis rtos APIS should is provided using simulation, we
should not build those on every platform we have. Avoid failures due to
incompatiblities in requirements coming from various boards and also
reduce churn and noise during testing and CI.
Fixes#80215
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This adds a user application that shows the usage of ZMS
The sample app shows three main functions of ZMS:
- read/write/delete key/value pairs
- fill all storage and delete it
- calculate free remaining space
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace OVERLAY_CONFIG with CONF_FILE since the file in question
contains an alternative configuration to the one in prj.conf
as clearly stated in the sample doc
'If you use poll you should also use `prj_poll.conf` instead of
`prj.conf`.'
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Move stm32_blk.conf ouside of 'boards' as this folder is meant to
contain only board-specific devicetree overlays and Kconfig fragments.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
The nRF54 and nRF92 chips has data cache, which means
the ICMsg and ICBMsg must be configured to follow required
cache alignment of the shared memory.
The `dcache-alignement` needs to be defined for that.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
This updates the documentation of all the Seeed Studio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Change regex for no_multithreading test version for nRF54L15 platform.
This needs to be changed because LOG is running in MINIMAL mode.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
