Insert Feature Units in between:
* USB Streaming Input Terminal and Headphones Output Terminal
* Microphone Input Terminal and USB Streaming Output Terminal
The Feature Units have Mute control only on the Primary channel 0.
The headphones Feature Unit also has Automatic Gain control on all
channels while microphone Feature Unit has Automatic Gain control only
on the Logichal channel 1.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add and verify against reference descriptors a High-Speed only 192 kHz
24-bit stereo headphones with explicit feedback UAC2 instance.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate and test both Full-Speed and High-Speed descriptors against
reference values. Verify that IAD, interface and endpoint descriptors
are not shared between Full-Speed and High-Speed descriptor sets because
the number of non-UAC2 interfaces can be different at different speeds
and thus the assigned interface numbers and endpoint numbers can differ.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Generate full and high speed descriptors based on UAC2 instance
properties. Fail the build if an instance does not have speed properties
or if the instance with given speed property exceeds the bandwidth
available at the selected speed.
Remove obsolete no longer used macros to determine offsets inside
complete UAC2 descriptors blob. Only speed-specific descriptors arrays
are supported.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add full-speed property to build all configuration and to UAC2
descriptor tests because this is what the tests were written for
(UAC2 class originally was full-speed only and there were no speed
properties available).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Raise the descriptor table span to 201 due to the inclusion of the USB
configuration descriptor.
Tested with:
$ west build -p -b it82xx2_evb tests/subsys/usb/desc_sections
-T usb.desc_sections
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Change USBD_CONFIGURATION_DEFINE macro to take the address of a string
descriptor node as an argument. This is a breaking change for macro
users, but quite convenient and easy to implement.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Reduce RAM disk size from 192 sectors down to 1 sector to solve linking
issue due to qemu_cortex_m3 target having too little RAM. The RAM disk
size does not really matter in this test case and should be as small as
possible.
Enable test random generator to solve missing sys_rand_get() required by
networking subsystem.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
We could reuse the BOS header, but there are parts that are only needed
in the legacy device support or used internally and the tests. Move this
parts to the appropriate places.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the previous changes, usb_set_config() is no longer called by
default at boot time, causing the test to fail.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add necessary macros and convert UAC2 descriptor test from descriptor
blob to descriptor set. Currently there is only Full-Speed descriptor
set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add macros to initialize full set of descriptors required for USB Audio
Class 2 instance. Descriptors start with Interface Association
Descriptor that binds together the AudioControl interface and all
AudioStreaming interfaces.
AudioStreaming interfaces have alternate setting 0 without any endpoints
and alternate setting 1 with isochronous endpoint with max packet size
calculated on maximum sample frequency, number of channels, subslot size
and clock synchronization (asynchronous endpoints require +1 sample).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Compare devicetree generated class specific descriptors for headset
example against reference hex values.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This is initial patch to add tests for new USB device support.
The test uses USB host support and virtual USB bus by default,
but should work on real hardware as well. For now, only the
Get Configuration and Set Interface requests are tested by default.
More tests will follow.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This is no longer necessary, as this option is selected as a dependency
for class implementations where it is required.
Also remove redundant test cases.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change zassume to zassert to judge failure whether is due to failing
to enable USB.
Fix issue: 48665
Signed-off-by: Zhao Shuai <shuai1x.zhao@intel.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Until now the whole USB device stack code is located
in the top subsys/usb directory. Move it to own directory
in preparation for upcoming extension and rework of USB support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the current USB device support, the sizes of bulk endpoint
are mostly configure through Kconfig and do not care if a device
is high-speed capable. The information if a USB device controller
supports high-speed comes from devicetree. Add a Kconfig option to
map this information and configure bulk endpoint sizes
accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
