Currently, the test doesn't clear the control data buffer before
calling recvmsg. This leads to recvmsg being unable to add the new
control data, which corresponds to the current received data.
This commit aims to clear the control data buffer to match most use
cases, when the control data buffer is empty before calling recvmsg.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Make sure we at least build test the network socket tracing
support. The tracing tests do not enable networking so do the
socket tracing tests here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The preprocessor gives this error when calling zsock_sendto
in user mode when there is a mismatch with amount of parameters
to the sendto wrapper call.
tests/net/socket/udp/src/main.c: In function ‘comm_sendto_recvfrom’:
tests/net/socket/udp/src/main.c:125:46: error: macro "zsock_sendto" \
requires 6 arguments, but only 5 given
125 | 0, &addr, addrlen);
| ^
In file included from include/zephyr/net/socket.h:1381,
from tests/net/socket/udp/src/main.c:15:
include/generated/zephyr/syscalls/socket.h:266: note: \
macro "zsock_sendto" defined here
266 | #define zsock_sendto(sock, buf, len, flags, dest_addr, addrlen)
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
In order to be compatible with Linux AF_PACKET socket calls, the
protocol field needs to be in network byte order.
So for example, if user wants to receive all packets, then the
protocol field needs to be set as "htons(ETH_P_ALL)".
See Linux manual page at
https://www.man7.org/linux/man-pages/man7/packet.7.html
for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to 'man 7 socket' about SO_PRIORITY:
Setting a priority outside the range 0 to 6 requires the CAP_NET_ADMIN
capability.
So use 6 instead of 8, in order to make UDP socket tests pass with native
offloaded sockets on native_sim platform.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Make sure the IPv6 source address selection works as expected
when using the IPV6_ADDR_PREFERENCES socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The setting is deprecated so change the code to either use the
native zsock_* API or enable POSIX_API to use the BSD socket API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The default ztest stack size was too small to run new UDP tests on
certain platforms (nrf52840 in this particular case), therefore increase
teh stack size in prj.conf.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that statistics is properly update for dropped
packets when IPv4 TTL is 0 or IPv6 hop limit is 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure recvmsg() is able to return IPv4 IP_PKTINFO and
IPv6 IPV6_RECVPKTINFO ancillary data to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
A little refactoring that simplifies dealing with nanosecond timestamp
values in packets and further decouples calling code from PTP:
Benefits:
- simplifies calling code by removing redundant conversions.
- prepares for removing PTP dependencies from net_pkt.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add test cases which verify that when UDP socket is connected, it only
accepts datagrams from a remote peer it was connected to, and not
others.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The FIONREAD ioctl (or rather ZFD_IOCTL_FIONREAD) returns the
number of bytes available on the socket that can be read
immediately.
Test that the ioctl behaves according to the expectation.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add an `after()` function that is executed after each test in
the testsuite.
Previously, even if one one test failed, it would calls almost
all subsequent tests to fail. This way, other tests can still
succeed.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Disables allowing the python argparse library from automatically
shortening command line arguments, this prevents issues whereby
a new command is added and code that wrongly uses the shortened
command of an existing argument which is the same as the new
command being added will silently change script behaviour.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
As the UDP test suite is mostly intended to run over loopback, use
loopback addresses and skip configuration of other addresses.
For the test cases that use fake Ethernet iterface the configuration
is done manually anyway, so just rename the symbols to avoid
collission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several test cases that create fake ethernet devices and
expect the fake device to be the only ethernet device enabled. Some
tests handle this be explicitly disabling actual ethernet drivers,
but this doesn't scale well.
Change drivers/ethernet/Kconfig to utilze a menuconfig option that
wraps all the drivers. This allows us for those test cases that
don't want any actual ethernet drivers to disable them with a
simple CONFIG_ETH_DRIVER=n.
Note, the fake ethernet devices utilize CONFIG_ETH_INIT_PRIORITY so
we have it outside of the 'if ETH_DRIVER' block.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Datagrams should either be fully sent or not sent at all if networking
buffers or network interface MTU does not allow that.
Verify that by trying to send MTU+1 bytes in case of IPv4 (as IP level
fragmentation is not implemented) and IPv6 (should fail when IPv6
fragmentation support is not enabled and succeed otherwise). In case of
IPv6 try to send "total number of network buffers + 1", so that even with
IPv6 fragmentation enabled requested datagram will not be sent. In all
tested cases when datagram is too big, check that ENOMEM error code is set.
NOTE: Tested behavior is not 100% compliant with Linux, as on Linux
EMSGSIZE error code is set when trying to send datagram bigger than MTU,
when manually disabling IP fragmentation (by setting IP_MTU_DISCOVER to
IP_PMTUDISC_DO). However, it is not trivial to implement such
behavior (EMSGSIZE error due to MTU) now and there is always a risk of
running out of buffers (and getting ENOMEM), so for now implemented tests
just assume the latter case to always happen.
Add 3rd testcase, which enables IPv6 fragmentation support, so that UDP
socket behavior can be tested in that context.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The network tests were expecting that network interfaces
are in certain order. As we cannot guarantee that, refactor
the tests like this:
* if test is using DUMMY L2 driver, then disable Ethernet L2
and fetch only DUMMY L2 instead of default interface
* if test is using Ethernet L2 driver, then make sure that the
test is using the Ethernet interface specified in the test
instead of the one provided by the DUT
Fixes#34505
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
