Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf54l15 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf54l15 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add second instance to be tested on nrf54h20dk. uart120 is a fast UARTE
which works on fixed pin locations. It is not available for cpuppr core.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 and provide
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test in the simulated nrf5340 by providing
an appropriate overlay.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
nrf54h20dk_nrf54h20_cpurad by default has less RAM dedicated for
DMA transfers and default 1k buffer cannot be used for
uart_async_long_buf case. Use custom value.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
One of the test case is performing long transfers using 1k buffers.
For some targets there may be not enough RAM to perform such
transfers. Make long buffer length configurable.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Apply the following changes to `nrf54h20dk` and `nrf9280pdk`:
* Convert `perm-*` properties to the newly introduced `nordic,access`,
both in board files and tests.
* Redefine shared regions to specify multiple access owners per node,
and ensure that each such region is reserved by one domain at a time.
`cpuapp_cpurad_ram0x_region` is only enabled by Radiocore, while
`cpuapp_cpucell_ram0x_region` is only enabled by Application core.
* Divide `shared_ram3x_region` so that each sub-region is owned by a
different domain. Their addresses must be rounded down to fit the
current UICR format.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
When PM_DEVICE_SYSTEM_MANAGED is enabled (and that's the default) all
devices are suspended when device go to idle state (through pm
subsystem and not through just cpu_idle). In this test we are manually
controlling PM of the DUT so we don't want that.
Additionally, suspend action is taking a semaphore and it is illegal
in idle thread (where system managment operates) which causes assert
in kernel scheduler.
Removed for nrf54h20 as it applies only there.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Updated overlay files to test using nocache.
and run outside of usersapce mode to avoid
inaccessible memory regions when using nocache on RT parts.
Also updated testcase file to reflect nocache testing.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add test which validates behavior of the UART driver when there
are errors on the receiver line.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add uart configuration for UART driver, add frdm_ke17z512_uart.overlay
and update testcase.yml to support UART testing.
There are LPUART and UART IPs in frdm_ke17z512 platforms, so add
additional shell tests as UART, the shell instructions can be entered
on the UART console window.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Add an emulated UART device test case. Demonstrate using the
zephyr,uart-emul bus for passing data to an emulated implementation for a
UART device driver.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add missing pull-up for RX pin in nrf54h20dk dual uart configuration.
Lack of pull-up was causing test failures.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for the EK RA8M1 board
This board is using Renesas RA8M1 MCU.
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
