Add implementation for Extended Advertising Auxiliary PDUs
to use ticks slot window feature.
This will allow the periodic scheduling of AUX_ADV_IND PDUs
to drift upto 10 ms advertising delay minus the ticks_slot
time reservation of the AUX_ADV_IND PDU when overlapping
with other states/roles that cannot be moved around, to
avoid skipping them.
Having an active Extended Advertising simultaneously with
an ISO Synchronized Receiver or Connected ISO connection
will now have less ISO SDU loss when using 10 ms ISO
intervals.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce ticker reschedule with drift so that role like
AUX_ADV_IND can start after overlapping states and roles
using time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to reschedule before overlap and be collision resolved
in the next periodic interval for tickers using slot window
yield.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the deprecated HCI driver API which was provided by the hci_driver.h
header file. The deprecation happened in Zephyr 3.7, so the API can now be
removed for Zephyr 4.1.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
TASK_SHUTDOWN was deprecated in newer SOCs and now removed
in MDK 8.68 (nrfx 3.9.0)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To ensure payloads are delivered in time for the first subevent
in framed BIS, ISOAL now enforces a (configurable) margin of
the calculated time offset
Without this margin, it has been observed that a broadcaster
can end up consistently missing the first subevent in every third
event in a 7.5 ms ISO with a 10 ms SDU interval
The margin is a conservative 2 ms by default, but can likely be
set a lot lower for most implementations and HWs
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fix spurious ISO Sync Receiver stall due to uninitialised
value accessed due to regression introduced by
commit 64faceea72 ("Bluetooth: controller: Stop Sync ISO
ticker when establishment fails").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error when BT_CTLR_PRIVACY is disabled. Compile
error seen building hci_uart sample for nrf54l15dk.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of BIS indices to dereference the payload
array, instead correctly use synchronised stream indices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This allows to build the shell with BT_CTLR_DTM and/or BT_CTLR_ADV_EXT
enabled.
The issues has been introduced by commit
bf897cf941 (Bluetooth: Shell: Restructure
shell files).
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Introduces the concept of ll_scan_aux_chain, that allows for
keeping track of several advertising chains with a minimal
overhead. This replaces using several scan aux sets each with
an associated ticker IDs
Only one ticker is used for following chains; This is achieved
by having the scheduled chains in a sorted list and restarting
the ticker when the first in the list expires
EVENT_DONE_EXTRA_TYPE_SCAN_AUX now includes a pointer to the lll
structure to identify which chain to flush (to avoid race
conditions)
New implementation is hidden behind a config for now (defaults
to off): BT_CTLR_SCAN_AUX_USE_CHAINS
Other minor changes:
- rx_incomplete node pointer was moved to ll_sync_set
- data_len removed from ll_sync_set (it uses the chains instead)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Introduce deferred ACL Tx packet transmission setup by radio,
so that an enqueued ACL Data packet can be transmitted with
the shortest latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add defines for radio timer capture and compare indices used
in the nRF Radio HAL implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The own_addr_type used for various HCI commands sometimes
had a BT_HCI_OWN_ADDR_* type value or a BT_ADDR_* type
value. Those are 2 different value spaces, and if the public
address types would ever change, it would start have incorrect
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
RFU bits has to be ignored according to the spec; In addition,
some MediaTek devices seems to have it set (by mistake I assume),
so having the check means we cannot sync to these devices
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fix to setup correct short prepare timeout when preempt
callback does not find the prepare in the head of the
pipeline. In this case, find the short prepare and setup
a fresh preempt timeout for the determined short prepare
present in the pipeline.
Relates to commit 7d1bc1789e ("Bluetooth: Controller: Fix
short prepare preempt timeout start").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix delayed ULL scheduling an auxiliary PDU reception by
skipping it. When many bufferred ADV_EXT_IND are to be
processed, the ULL scheduling could get late and then cause
the scan aux LLL to detect increased overhead start timing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to reschedule at window start when there are no more
tickers in the list to check for overlap.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove ticks_elapsed use in reschedule_in_window as it has
already been used in the bottom half processing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
During use of tests/bluetooth/shell application to perform
extended scanning with periodic advertising and broadcast
audio source devices around, it was observed that the
application crashed due to too low BT_RX_STACK_SIZE, hence
increase by 128 bytes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation of single switch timer minimum compare
value requirement. Do not always add the maximum possible
radio latency duration, but check if the required compare
value is smaller, then use the remainder required as the
extra compare value. This fix reduces latencies to setup
radio receptions and fixes an assertion in lll_scan_aux
when radio_tmr_start_us() is checked for latencies.
Relates to commit bcd28e0a86 ("Bluetooth: Controller:
Fix sw switch single timer for spurious TXEN/RXEN").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect elapsed events value when event prepare are
aborted in the pipeline. This caused premature supervision
timeouts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_SCAN_AUX_SYNC_RESERVE_MIN such that event is not
aborted when near supervision timeout conditions.
Relates to commit ddf04997a5 ("Bluetooth: Controller: Add
abort fairness in overlapping Periodic Sync").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_PERIPHERAL_ISO_RESERVE_MAX Kconfig option
so that disabling this option will use minimum time
reservation and exercise the peripheral ISO connection event
continuation using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_PERIPHERAL_RESERVE_MAX Kconfig option so
that disabling this option will use minimum time reservation
and exercise the peripheral connection event continuation
using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
* Setting the adv data, scan rsp and adv aux ad data can happen on
overlapping buffers
* There can be other memcpy's that need to be changed to memmove but
these are the only ones I could reproduce the issue and since memmove
has a performance penalty, I left the others as is.
Signed-off-by: Yago Fontoura do Rosario <yafo@demant.com>
Some enums have been renamed:
- NRF_CCM_EVENT_ENDCRYPT -> NRF_CCM_EVENT_END
- NRF_CCM_TASK_CRYPT -> NRF_CCM_TASK_START
Also adjust some TX power level settings (26/28dBm not always available
depending on the SoC revision).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix assertion when enabling simultaneous multiple Extended
Advertising chain reception that is enabled by increasing
supported auxiliary scan contexts.
ULL sets the association of aux context to scan and sync
context, and LLL resets the association; this is safer
compared to earlier implementation where ULL did both the
association and reset which caused aux context memory
leak.
Supported auxiliary scan contexts can be increased using
CONFIG_BT_CTLR_SCAN_AUX_SET value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If a connection update (from central) overlaps a peripheral initiated
conneection param request, then central rejects peripheral request
and continues central procedure. This lead to an assert in peripheral
On instant there would not be an rx_node for notification, as this
would have been discarded by the reception of the REJECT.
This fix ensures that once an rx_node has been 'accepted' for retention
it will not be discarded/overwritten by future rx_nodes
The test will trigger the assert without the fix in.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Because timing of the pause/resume for peripheral/sync is based on
central/broadcaster active clock, the sleep-clock jitter shall not be
added.
Signed-off-by: Morten Priess <mtpr@oticon.com>
- Add next pointer to node_rx_iso_meta for pre-transmission linked
list (does not increase memory usage as union is larger).
- Fix broadcaster not setting PTC with test configuration
- Refactor stopping of sync ISO tickers to separate function
Signed-off-by: Morten Priess <mtpr@oticon.com>
Share pause/resume functionality by moving resume ticker handling to
ull_iso. Rename interface function to ull_conn_iso_resume_ticker_start,
and provide handles instead of instance pointer.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Remove unused nRF21 FEM SPI CSN control as the Zephyr
Controller does not implementation SPI control for Tx/Rx
nor for Tx gain settings.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit makes the device tree configuration decide
which link layer is compiled in. We do this to avoid
hard-to-understand linker errors referencing device tree nodes.
The following configuration creates a difficult to parse
linker error:
* BT_LL_CHOICE contains multiple entries, BT_LL_SW_SPLIT
is selected.
* Each BT_LL_CHOICE has its own unique device tree node with its
own "compatible".
* Only one of the link layer device tree nodes has status "okay",
but not the one corresponding to BT_LL_SW_SPLIT.
The linker error indicates that code using the HCI driver fails
to link with the controller. This because the HCI driver device
tree node references the link layer selected in devicetree which
is not compiled in.
By adding a dependendency to the device tree node, this can no longer
happen. Instead, if BT_LL_SW_SPLIT is now selected in a configuration
file, a Kconfig warning will be issued:
```
warning: The choice symbol BT_LL_SW_SPLIT
(defined at subsys/bluetooth/controller/Kconfig:129) was
selected (set =y), but BT_LL_SOFTDEVICE (defined at
/home/ruge/ncs/nrf/subsys/bluetooth/controller/Kconfig:11)
ended up as the choice selection.
```
This should be easier to understand than:
```
...(hci_core.c.obj):(.data.bt_dev+0x16c):
undefined reference to `__device_dts_ord_132'
```
After this commit we should consider getting rid of link layer
selection from Kconfig completely as the link layer is in practice
selected through device tree.
Unit tests have been updated to satisfy the dts dependency.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Moves around the shell files so that they are placed nearer
to the features they expose access to.
A few changes as possible has been made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For code clarity, this commit adjusts the use of `return` statements
in functions with a void return type as follows:
- Transform `return foo();` into separate statements:
`foo();`
`return;`
- Remove unnecessary `return` statements when
they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
