This commit adds a runner wrapper for the 'minichlink' program which
offers a free, open mechanism to use the CH-LinkE programming dongle for
the CH32V003.
https://github.com/cnlohr/ch32v003fun/tree/master/minichlink
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
Commit e2a32d8b0ca596afeae48739c43817f693720a88 introduced an unbound
cmd issue for jlink flashing.
Fixed by moving cmd assignment outside of condition.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
These ignores were added with an older version of pylint and are
either removed or ignored by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Previously, rtt start would always fail because the target
(i.e. firmware) had not been started.
```
Info : rtt: Searching for control block 'SEGGER RTT'
Info : rtt: No control block found
```
When the command is 'rtt', run the binary via gdb before calling
'rtt start'. Firmware calls `SEGGER_RTT_Init()` shortly after
init which allows OpenOCD to find the RTT control block.
Similarly, only start the 'rtt server' after calling
'rtt start' to avoid any potential race conditions
internally within OpenOCD.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Previously, there was a warning that the to_num() method can
(and probably should) be unbound from OpenOcdBinaryRunner.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Similar to how print_gdbserver_message() prints GDB server info
when "west debug" is run, print RTT server info when "west rtt"
is run.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Netcat (nc) does not handle SIGINT. It silently ignores it.
We cannot use run_client(), given that the pydoc for
run_client() specifically contains "Run a client that
handles SIGINT".
Instead, use check_call(), which correctly handles Ctrl+C.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
LinkServer manages port numbers for gdb and semihost as separate linear
sequences when invoked to debug multi-core applications, e.g the
gdb-server instance for cpu0 will have the default GDB port 3333 and the
next gdb-server instance will be assigned the port 3334. The latter will
conflict with the default port for semihost which is 3334.
This patch changes the default port for semihost to 8888.
Port numbers can be changed when invoking the linkserver runner.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
The production version of the nRF54H20 SoC is now available, so remove
the initial Engineering B (EngB) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
On nRF54H and nRF92, booting certain cores requires programming a UICR,
which is normally generated using nrf-regtool. This should be considered
an optional dependency, because we do not wish to force non-Nordic users
to install it just to work with Zephyr, or just for build-only tests.
When nrf-regtool is not installed, a CMake warning will be displayed,
but people ignore warnings all the time. As the last line of defense,
check for missing UICR in the nrfutil flash runner, to prevent our users
from unintentionally programming unbootable firmware. Show a fatal error
specifically if CONFIG_NRF_REGTOOL_GENERATE_UICR=y, yet no UICR exists.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
With the recent introduction of the SUIT manifest starter binary blob,
it is now possible to use it with the nRF54H20 during the flashing
procedure in order to provide a valid SUIT manifest to the system.
This PR introduces the code that handles programming the SUIT manifest
starter, as well as a new --suit-manifest-starter command-line option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Commit f987e8c6f0a49b04a1184b1a36612612482e3d24 introduced a regression
where the is_ip check fails if no --id is passed as an argument.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If multiple J-Links with IP support are used,
they can be selected with different ports.
The actual implementation is just using the default port.
Make the port selectable with <ip>:<port>.
Signed-off-by: Michael Arnold <marnold@baumer.com>
Add support for xsdb(Xilinx System Debugger) used with AMD's FPGA
and SOC platforms, it is a user-friendly, interactive, and scriptable
command line interface, by design choice it's expected that platforms
to have xsdb scripts present inside their platform code.
xsdb runner has bitstream and fsbl optional arguments, bitstream is
needed for fpga targets and fsbl is needed for SOC targets, added
support for both options.
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
The commit 221199e15b presents a bug that
makes west flash failed with error.
AttributeError: 'NoneType' object has no attribute 'startswith'
In function is_tunnel(), tunnel may contain None and has no attribute
"startswith". Fix it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This adds support for J-Link tunnels, which run on top of an IP network
and therefore uses the -IP option. J-Link tunnels are identified by a
tunnel: prefix instead of a bare IP address. This change checks for the
presence of such a prefix, and choses the -IP transport option if the
tunnel prefix is found.
This has been tested with J-Link Remote Server v7.98g and the SEGGER
tunnel option.
Signed-off-by: Adam Dunkels <adam@dunkels.com>
Provide a mechanism to propagate useful arguments from one runner to the
next. The primary use case for this is to propagate a JLink serial
number, so that if it is queried from the terminal the user only needs
to make the choice once.
Implements #76077.
Signed-off-by: Jordan Yates <jordan@embeint.com>
