Do not apply format setting unless needed. Also, correct the check for
the RGB565 format setting- the zephyr display API treats RGB565 and
BGR565 as big endian, so the format needed here is BGR565.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for using the SMARTDMA engine on the FRDM-MCXN947 board with
the video capture sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Handle line_offset field within video capture sample. Other samples do
not support partial framebuffers and therefore can ignore this field.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove the unnecessary video-controls header included in video.h.
Drivers, applications should explicitly include it when needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make the blinking and fading parameters adjustable so that samples
can be run on devices that support only short periods.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add sample application to capture an image frame from a camera
and send it for display on LCD via the LVGL library.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add code to get the current frame rate and enumerate all supported frame
rates (frame intervals) of the current format.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add Devicetree overlay for samples basic/blinky_pwm and drivers/led/pwm
for frdm_mcxc242 board to set appropriate tpm clock source and
to enable pwmleds.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Remove `SPI_NOR_IDLE_IN_DPD` to simplify the possible transition states
in the `spi_nor` driver. This option was originally added 5 years ago
when device runtime PM was in a much less mature state.
I do not believe having a separate power management implementation for
this one in-tree driver is in the interests of the project.
The behaviour of `SPI_NOR_IDLE_IN_DPD` leads to extremly suboptimal
behaviour in use cases where multiple small reads are performed
sequentially, see #69588.
Removal of this option does not break the behaviour of any existing
applications, only increases current consumption in idle by ~10uA until
device runtime PM is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Exclude the nucleo_h755i_q m4 core from the flash_shell samples,
as the m4 core in stm32h7 parts does not have flash support in Zephyr.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
Nrf54h20dk and nrf54l15 have UART Flow Control enabled
by default on all cores.
It's a source of problem when mbox sample is run in Twister.
Twister opens serial port only on host core,
thus nobody confirms reception of logs from remote core.
As a result, remote core stucks on printing boot banner.
Twister fails sample due to the timeout while waiting for messages
from remote to host.
Disable Flow Control on remote core when mbox sample is executed
on nrf54h20 or nrf54l15.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Add support for testing IPC between cpuapp<>cpuflpr. Some adjustments
have been done to be able to support two different remote targets for
the nrf54h20dk cpuapp.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The commit fixes soc_flash_nrf sample documentation where incorrect
partition names has been used and removes information of
CONFIG_TRUSTED_EXECUTION_NONSECURE affecting which partition is used
as this is no longer true.
The printf message reporting start of sample has been modified
to print "Nordic nRF5 Flash Sample" instead of
"Nordic nRF5 Flash Testing", which is more accurate for code
residing in samples.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that flash controller driver is supported on M4 of stm32h745i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample.
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Now that flash controller driver is supported on M4 of stm32h747i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Added i2c configuration to test target_eeprom case for frdm_ke17z
Added `sample.drivers.i2c.target.kinetis` in sample.yaml for frdm_ke17z
and frdm_ke17z512 automatically run the tests
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
The sample will print a ping-pong message indefinitely on both,
application (or main) core and remote core. When twister is run in
device testing mode, only one terminal is evaluated (application), so
the regex just needs to account for the application core output, not
remote.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Uses the variable for the default image when adding sysbuild
dependencies so that they can be copied out-of-tree and still work
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Print on what board/core sample is executing.
Print how many bytes of data can be sent
in the mbox message (show use of mbox_mtu_get_dt()).
Print how many channels are available for incoming and/or
outgoing messages (show use of mbox_max_channels_get_dt()).
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
A specific test case for STM32 RTC is needed because of the way Counter
node is selected in preprocessing.
Tests STM32 RTC_Alarm using counter_ll_stm32_rtc driver.
This also clarifies how STM32 RTC Alarm can be used in this test.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
The overlay was in the root of the sample folder instead of the boards
folder. This is clearly a mistake.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Define the configuration to run the test on the external memory
xspi flash of the stm32h573i_dk disco kit in MemoryMapped Mode
Reading is done with memcopy and erase/write are aborting operation
to send the appropriate command
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The sample is added to demonstrate mspi_transceive asynchronously.
Apollo3 MSPI controller has hardware command queue and supports
scatter IO and callback management, so no additional software queue
is required.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
The sample code is copied from spi_flash. To flash API, there is no
difference if the bus is spi or mspi.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
A collection of simple enablements to match some of the enablement
done for rd_rw612_bga as closely as possible on the frdm_rw612 board.
- i2c
- spi
- dma
- mrt
- ctimer
- os timer
- dac
- adc
- trng (alread was enabled but now listed support)
- watchdog
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Do not run the samples/drivers/flash_shell application on the
stm32h745i_disco//m4 as the flash controller is not supported yet
on the M4 core (only M7). Just like the nucleo stm32h745//m4
is excluded.
Also exclude stm32h7rs disco at the moment (still TODO).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
