Add collector parameter to metric creation macros so that it
is possible to bind the metric to collector already at built
time.
Also add optional user_data to metric macro calls so that user
can add optional data there. This will be used by network statistics
Prometheus support in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Embed "struct prometheus_metric" to individual metric like
counter, gauge, histogram and summary. This way we avoid having
a separate base pointer in specific metrict struct. We also do
not need to search the specific metric from base metric as
we can simply use CONTAINER_OF() macro to get the base metric.
This embedding means that the counter, gauge, histogram and summary
metric define macros are changed as user does not need to create a
separate "struct prometheus_metric".
Convert the tests and sample to use the new macros.
Remove also the static from metric creation macros so that user
can decide whether it needs collector to be static or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
Reducing the heap requirement for the hci_ipc sample from
8KiB to 4KiB. It has been tested in various configurations to
work with 2300, but 4KiB was used to provide some leeway for
future updates.
The heap requirement is not documented, and it is unclear why
values lower than 2300 (not exact number) won't boot, and should
be investigated further.
Memory has become a very scarce resource for especially the ISO
builds for the nRF5340, which is why this is getting reduced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This PR adds arduino giga r1 overlay in the dac sample.
Arduino Giga R1 has a 3.5mm audio jack connected to the
dac.
Signed-off-by: Mario Paja <mariopaja@hotmail.com>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the connection and advertising intervals of the
broadcast and connected ISO samples (including benchmark
samples) to work better with the selected SDU intervals
and the resulting ISO intervals.
For the ISO connected benchmark the order of CIG and ACl
has changed, so that we create the CIG before connecting
the ACL for the purpose of providing as much information
as possible to the controller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
The required ISO Tx buffers have to match the Read Buffer
Size values, otherwise the difference in the value cause a
similar amount of buffers to be stalled in the IPC driver.
Use reduced HEAP size to make room for increase in RAM
usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation for Extended Advertising Auxiliary PDUs
to use ticks slot window feature.
This will allow the periodic scheduling of AUX_ADV_IND PDUs
to drift upto 10 ms advertising delay minus the ticks_slot
time reservation of the AUX_ADV_IND PDU when overlapping
with other states/roles that cannot be moved around, to
avoid skipping them.
Having an active Extended Advertising simultaneously with
an ISO Synchronized Receiver or Connected ISO connection
will now have less ISO SDU loss when using 10 ms ISO
intervals.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Exclude stm32 platforms with accel0 or magn0
for running the samples/sensor for trigger
as their sensor driver does not have trigger set.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Move "bluetooth" tag and harness from the common section
of the smp_svr sample.yaml file to "bluetooth" specific test cases.
Signed-off-by: Andrej Butok <Andrey.Butok@nxp.com>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Change the select to a depends on for the Kconfig options
for HAS and HAS_CLIENT.
This is an effort to reduce the number of selects used by
LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes reorganize the ethernet configuration by removing the
use a regulator to enable the PHY: the correct GPIO pin is set in code
only if the network has been configured via CONFIG_NET_L2_ETHERNET.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add possibility to retrieve VBUS status of the nPM1300 charger through
its sensor APIs. Updated shields/npm1300_ek sample to use the new API.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Add a function similar to sample_usbd_init_device(), but one that does
not initialize the device. It allows the application to set additional
features, such as additional descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The nrfx_gppi module is an abstraction over nrfx_ppi and nrfx_dppi
drivers. It now has a Kconfig option that is separate from nrfx_dppi and
by default it enables all PPI/DPPI instances, if available.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
ARGB8888 values all had alpha '0x00' (=transparent).
Changed them to '0xFF' and added a transparency test patch in the middle
of the screen.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
`lv_task_handler()` returns a `uint32_t`, but `k_msleep` takes a
`int32_t`.
If no timer exists, `lv_task_handler()` returns `UINT32_MAX` to indicate
that we should wait forever. However, this gets auto-cast to `-1`,
indicating to `k_msleep` to not wait at all, creating a busy loop.
Hence, a clamping to `[0, INT32_MAX]` is required.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Adds a sample that renders the simple `hello world` LVGL demo
with a transparent background, to demonstrate ARGB8888 framebuffer
capabilities.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR is on
by default, if the device supports that, so there is no need
to enable it explicit.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
use auto init for networking, dhcp and sntp.
This simplifys the code of this sample by using the
auto init feature of the networking stack.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
