Adds compiler flag(s) and some architecture-specific relocations
for ARC. No userspace support, doesn't support all relocations.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Previously, the anchor for `_POSIX_THREAD_SAFE_FUNCTIONS` was
`posix_thread_safe_functions` but it should have been
`posix_option_thread_safe_functions`.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Remove unwanted reference link to the section (Usage)
in ARM Coresight Trace Deformatter that shows up in
the main Debugging documentation page, by lowering
the level of (Usage) heading from ##### to *****
The commit also has a typo fix.
Signed-off-by: Ahmed Adel <a.adel2010@gmail.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
In the description of the partial-final frame of the SMP UART transport
specification was a typo in the maximum allowed raw body size. The size
must not be larger than MTU - 5 because there are 5 bytes occupied by
total length (2), frame termination (1) and crc (2).
Signed-off-by: Simon Moser <simon.github@mailbox.org>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ezurio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The nRF54 and nRF92 chips has data cache, which means
the ICMsg and ICBMsg must be configured to follow required
cache alignment of the shared memory.
The `dcache-alignement` needs to be defined for that.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The details of how the ICBMsg communication is done, are hidden
inside the source code. This specification adds details about
the ICBMsg protocol.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
The details of how the ICMsg communication is done, are hidden
inside the source code. This specification adds details about
the ICBMsg protocol.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Some devices may belong to >1 power domain, so with the current design
this is something not possible to describe. It's worth to note that
Linux also uses the `power-domains` naming scheme, not `power-domain`.
This patch also introduces `power-domain-names` so that each entry in
`power-domains` can be given a name if needed. `#power-domain-cells`
is now required as well.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Document availability of sys_trace_user_event, for users who are trying
to add custom trace events to their application.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The smp library implements de/serialization of SMP messages.
The smpclient library implements the serial, BLE, and UDP
transport layers for Windows, Linux, and macOS.
Signed-off-by: JP Hutchins <jp@intercreate.io>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark the POSIX_DEVICE_IO Option Group as commplete. This Option
Group is required for PSE51, PSE52, PSE53, PSE54, and most of
the interesting applications involving file descriptors and
sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Prior to this fix the descriptors end tag was placed in the binary
using LONG. This was wrong because the tag is of type short, and
the size of the descriptor (0), should have also been placed.
It so happened that on little endian machines the incorrect linker
script yielded correct results, as the extra zeros added to make
the value a long ended up as the correct byte sequence
(FF FF 00 00). On big endian machines however, the wrong sequence
is generated (00 00 FF FF).
This patch correct this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Clarify that the actual calls to these backend functions are made
from `settings_save_subtree()`, which is called by `settings_save()`
or can be used directly.
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@astrolightspace.com>
It includes both the high-level documentation of the subsystem and
that of APIs defined in code (PSA Secure Storage and internal APIs of
the subsystem).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This commit introduces architecture-specific ELF relocations for RISC-V,
in accordance with the RISC-V PSABI specification:
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc
Also, the necessary compiler configurations for compiling LLEXT
extensions on RISC-V are added, and the llext tests are executed on
RISC-V targets.
Calling llext extensions from user threads in RISC-V is still
unsupported as of this commit.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all STM32 board samples in samples/boards/st to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Microchip board samples in samples/boards/espressif to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds support for all relocation type produced by GCC
on AARCH64 platform using partial linking (-r flag) or
shared link (-fpic and -shared flag).
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
Move the network buffer documentation from networking to services as the
implementation now lives outside of the networking subsystem.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add section which describes how Coresight STM logging works and how
to use it. Currently this feature is supported only on nrf54h20.
However, most parts of the solution is not nrf54h20 specific and
other cores with Coresight can use it.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add documentation for the new LLEXT APIs that allow to call the
initialization and cleanup functions of an extension.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
