This was only used on the Quark SoCs. It is no longer used, can no
longer be tested, and it's reliant upon the deprecated legacy PCI
subsystem. Remove it to prevent bitrot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Several user mode tests cannot run on twr_ke18f because
either the platform does not have a sufficient number of
MPU regions required for the tests, or, the tests also
require HW stack protection (which has been, by default,
excluded in user mode tests for twr_ke18f board). We
excluded the board from all those tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit replaces several CONFIG_USERSPACE=y
settings with CONFIG_TEST_USERSPACE=y. This allows
the test sub-system Kconfig structure to control
the settings of USERSPACE and HW_STACK_PROTECTION
in the various tests suites.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This adds test for bt_uuid_create APIs using a byte array in LE/BE
format as it is expected and then proceed to compare with matching and
unmatching UUID declared in host byte order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extended case for testing deletion of the first entry while
it is the most recent one.
This extension allow to reproduce issue #18813 and shows that
the bugfix works well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Make sure that the last entry added is deleted correctly by storing the
fact that one was found in a local variable.
Fix by Laczen JMS <laczenjms@gmail.com>
Fixes#18813.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
this case isn't designed for SMP, setting CONFIG_MP_NUM_CPUS=1 to
run the full SMP kernel config, but with only one CPU available.
Fixes: #12478.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
As we have re-worked the test code, and the test-case can run
on Cortex-M platforms on any available and implemented NVIC
IRQ lines, we do not need to exclude these ARM boards anymore.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-works the test for the ARM architecture,
so that it can work with any available NVIC IRQ, not
bound to use the last 2 NVIC lines. It makes use of
the dynamic IRQ feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove bunch of TC_PRINT's with too verbose logging of test operations.
The only logging required is in case of failures, and improve that in
a couple of cases by using zassert_*(), and log errno.
In particular, this allows to reuse existing testcase functions to
create more complex testcases.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix unhandled return values as most other places handled in this
file, fix coverity issue 203507.
Fixes: #18445.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Fix unhandled return values as most other places handled in this
file, fix coverity issue 203454.
Fixes: #18443.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We need to increase the stack size of the main thread, to
avoid stack overflow, when executing the tests on various
platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A second semaphore is used for the second trickle timer, so that if the
first timer expires twice before the second one, the test would still
wait before proceeding to check on cb_2_called.
Fixes#18598.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The commit fixes the way we determine an available
NVIC IRQ line to perform the zero-latency IRQ test.
The test can now run properly on SOCs that do not
have a continous set of implemented NVIC IRQ lines.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The test assumes that storage is clear before it runs. This
might be not true as lot of devices are only partially erased by
'west flash'.
Patch introduce procedure for testing whether test runs the first
time and clear storage if so.
The procedure uses mark which is stored inside SoC embedded program
flash. It will not work one devices on which read/write to it is
impossible.
fixes#16463
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Nordic platforms measure ticks in cycles of a 32 KiHz clock for which
the minimum compare delay is 2 ticks. The test assumed an upper bound
of four ticks delay per loop iteration, resulting from alignment at
various layers. This delay is met on Nordic for tick rates at or below
16384, but is too short for the default 32768 Hz tick rate.
Instrumentation confirms that the usleep test loop body on Nordic at 32
KiHz ticks takes 3 ticks as the optimum delay, only when a debug probe
is active. In other circumstances it can take either 5 or 6 ticks,
depending on timer alignment and stability.
Relax the upper bound for platforms using this system timer at the
highest rate.
Closes#17965.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Platforms which use the GEN_SW_ISR mechanism for interrupt handling
can make use of a really simple whitebox trick for verifying that it
worked (i.e. that the pointer and argument get placed in the table
correctly).
Easy and simple way to get some coverage for dynamic IRQs, which is
currently entirely missing. Long term we'll want to replace this with
a test that uses the API directly and chooses an arch-specific vector
to set, and triggers it using arch-specific code, but that's quite a
bit more effort and for now we need to land patches to
z_irq_connect_dynamic() which show test coverage.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
An inverted comparison typo led to the final loop in the sflist being
skipped. Fix so that it actually runs.
(Odd that it took a static analysis tool to detect this, the loop
expressions are all constants, I'm surprised gcc didn't see it while
doing unrolling analysis).
Fixes#18437
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Can't use a volatile variable in something that the tool thinks is an
optional assert, because the read is treated as a side effect.
Fixes#18438Fixes#18439
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We were testing the value of a volatile variable inside a zassert,
which static analysis doesn't like. In principle, it might be
volatile because it's an MMIO register or something and the read is a
side effect, and an assertion will be optionally compiled. (Except
here the value is just regular memory marked volatile for
threadsafety, and zassert will never be elided in a test, but the tool
doesn't know that).
Refactor a little so we always read the variable in a way the tool can
detect is consistent.
Fixes#18446
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It's shorter and may get rid of false Coverity positives 203489 and
203498 and fix#18424 and duplicate #18425.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Confirms build (and run) of C++17 applications that make use of STL
containers and other features.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add test for check whether deleted entry is recognized properly
after settings reload.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This fixes the coverity problem which which in fact is a non-issue as
the code would assert before reaching that line which makes the NULL
pointer check useless so this removes it.
Fixes#18431
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix ASSERT expressions with volatile variables in
arch/arm/arm_thread_swap test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix a memset function call so the sizeof() argument is
evaluated using the appropriate struct type.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix ASSERT expression with volatile test variables
in arch/arm/arm_ramfunc test suite. Fix, also, an
logical expression in an if-statement in the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix expressions with volatile variables in ASSERT
statements in arch/arm/arm_zero_latency_irq test
suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Closes#18392 by asserting and returning an error if the block size is
not positive.
Closes#18458. The diagnosis here was not relevant as an in-range EOS
is written before the buffer is used, but using the non-terminated
length is slightly more clear about intent and may avoid a read overrun
of the mount point.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
