patch adds necessary files and does the modification to the existing
files to add device support for x86 based intel quark microcontroller
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The porting of the TI CC2650 SoC introduces the need to
write a specific configuration area (CCFG) at the end of the
flash. It is read by the bootloader ROM of the SoC.
For now, this is a quick hack and not a generic solution;
similar needs may arise with other hardware.
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@smile.fr>
Clearing fields in the region descriptor attributes doesn't always have
the expected effect of revoking permissions. In the case of bus master
supervisor mode fields (MxSM), setting to zero actually enables read,
write, and execute access.
When we reworked handling of region descriptor 0, we inadvertently
enabled execution from RAM by clearing the MxSM fields and enabling the
descriptor. This caused samples/mpu_test run to throw a usage fault
instead of an MPU-triggered bus fault.
Fix this by setting all the MxSM fields to 2'b11, which gives supervisor
mode the same access as user mode.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We need to make sure that __NVIC_PRIO_BITS & CONFIG_NUM_IRQ_PRIO_BITS
are set to the same value. Add a simple build time check to ensure
this is the case. This is to catch future cases of issues like
ZEP-2243. This is a stop gap til we resolve ZEP-2262, which covers use
of both __NVIC_PRIO_BITS & CONFIG_NUM_IRQ_PRIO_BITS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Macro is used to create a structure to specify the boot time
page table configuration. Needed by the gen_mmu.py script to generate
the actual page tables.
Linker script is needed for the following:
1. To place the MMU page tables at 4KByte boundary.
2. To keep the configuration structure created by
the Macro(mentioned above).
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Fixes an issue where if a thread calls k_panic() or k_oops()
with interrupts locked, control would return to the thread
and it would only be aborted after interrupts were unlocked
again.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The REGION bits (bit[3:0]) of MPU_RBAR register can specify the number
of the region to update if the VALID bit (bit[4]) is also set.
If the bit[3:0] of "region_addr" are not zero, might cause to update
unexpected region. This could happen since we might not declare stack
memory with specific alignment.
This patch will mask the bit[4:0] of "region_addr" to prevent updating
unexpected region.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Inserting the IDT results in any data afterwards being shifted.
We want the memory addresses between the zephyr_prebuilt.elf
and zephyr.elf to be as close as possible. Insert some dummy
data in the linker script the same size as the gen_idt data
structures. Needed for forthcoming patches which generate MMU
page tables at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Calling 'svc' on ARMv6 causes a hard fault if interrups are locked.
Force them unlocked before making the svc call.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Ethernet on K64F is connected via Logical Bus Master 3.
Section 19.3.8 of K64F reference manual establishes bits 20-18
(M3UM) on page 427 as "Bus Master 3 User Mode Access Control".
To fix RWX user mode access via Bus Master 3 when MPU is enabled,
we need to add these bits to the MPU region descriptors.
This fixes ETH0 on K64F when MPU is enabled.
Fix recommended by Maureen Helm <maureen.helm@nxp.com>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's clarify what bits are being set by removing magic numbers in the
MPU READ/WRITE/EXECUTE User Mode and Supervisor Mode defines.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This patch add arm core MPU support to NXP MPU driver.
With this feature it is now possible to enable stack guarding on NXP
MPUs.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
This patch add arm core MPU support to ARM MPU driver.
Change-Id: I5a61da4615ae687bf42f1c9947e291ebfd2d2c1d
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds the arm core MPU interface, a common way to access the
pu functionalities by the arm zephyr kernel.
The interface can be divided in two parts:
- a core part that will be implemented by the arm_core_mpu driver and
used directly by the kernel
- a driver part that will be implemented by the mpu drivers and used by
the arm_core_mpu driver
Change-Id: I590bd284abc40d98b06fdf1efb5800903313aa00
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch adds initial MPU support to NXP K6x family.
The boot configuration prevents the following security issues:
* Prevent to read at an address that is reserved in the memory map.
* Prevent to write into the boot Flash/ROM.
* Prevent from running code located in SRAM.
This driver has been tested on FRDM-K64F.
Change-Id: I907168fff0c6028f1c665f1d3c224cbeec31be32
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
For various reasons its often necessary to generate certain
complex data structures at build-time by separate tools outside
of the C compiler. Data is populated to these tools by way of
special binary sections not intended to be included in the final
binary. We currently do this to generate interrupt tables, forthcoming
work will also use this to generate MMU page tables.
The way we have been doing this is to generatea "kernel_prebuilt.elf",
extract the metadata sections with objcopy, run the tool, and then
re-link the kernel with the extra data *and* use objcopy to pull
out the unwanted sections.
This doesn't scale well if multiple post-build steps are needed.
Now this is much simpler; in any Makefile, a special
GENERATED_KERNEL_OBJECT_FILES variable may be appended to containing
the filenames to the generated object files, which will be generated
by Make in the usual fashion.
Instead of using objcopy to pull out, we now create a linker-pass2.cmd
which additionally defines LINKER_PASS2. The source linker script
can #ifdef around this to use the special /DISCARD/ section target
to not include metadata sections in the final binary.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are macros that are expected to be defined at all times by
the compiler. We need them at the very beginning of kernel.h for
the k_thread definition, before it's possible to include arch.h.
Make a special toolchain header for XCC compiler and place these
defines in there. Otherwise inherit all the other GCC defines.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't use __scs or __scp anymore so we can remove the related linker
script and various defines and such associated with them.
Change-Id: Ibbbe27c23a3f2b816b992dfdeb4f80cf798e0d40
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL,
with support for the CC3220SF SoC, which is an update for
the CC3200 SoC.
This is supported by the Texas Instruments CC3220 SDK.
Jira: ZEP-1958
Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Historically, space for struct k_thread was always carved out of the
thread's stack region. However, we want more control on where this data
will reside; in memory protection scenarios the stack may only be used
for actual stack data and nothing else.
On some platforms (particularly ARM), including kernel_arch_data.h from
the toplevel kernel.h exposes intractable circular dependency issues.
We create a new per-arch header "kernel_arch_thread.h" with very limited
scope; it only defines the three data structures necessary to instantiate
the arch-specific bits of a struct k_thread.
Change-Id: I3a55b4ed4270512e58cf671f327bb033ad7f4a4f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch add the Memory Protection Unit parameter to the arm core
configuration.
Change-Id: Ifee8cdd5738391a6f182e8d0382d27eeb8c546ba
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org>
Put the reason code in r0 and make a SVC #2 call, which will be
propagated to _fatal_error_handler as an exception.
The _is_in_isr() implementation had to be tweaked a bit. User-generated
SVC exception no longer just used for irq_offload(); just because we are
in it does not mean we are in interrupt context. Instead, have the
irq_offload code set and clear the offload_routine global; it will be
non-NULL only if it's in use. Upcoming changes to support memory
protection (which will require system calls) will need this too.
We free up some small amount of ROM deleting _default_esf struct as it's
no longer needed.
Issue: ZEP-843
Change-Id: Ie82bd708575934cffe41e64f5c128c8704ca4e48
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We reserve a specific vector in the IDT to trigger when we want to
enter a fatal exception state from software.
Disabled for drivers/build_all tests as we were up to the ROM limit
on Quark D2000.
Issue: ZEP-843
Change-Id: I4de7f025fba0691d07bcc3b3f0925973834496a0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For exceptions where we are just going to abort the current thread, we
need to exit handler mode properly so that PendSV can run and perform a
context switch. For ARM architecture this means that the fatal error
handling code path can indeed return if we were 1) in handler mode and
2) only wish to abort the current thread.
Fixes a very long-standing bug where a thread that generates an
exception, and should only abort the thread, instead takes down the
entire system.
Issue: ZEP-2052
Change-Id: Ib356a34a6fda2e0f8aff39c4b3270efceb81e54d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Scanning for typos in comments and strings.
Change-Id: I3d4db89e0824959252c79c19baa50028354247bd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The CONFIG_FLASH_LOAD_OFFSET allows the zephyr image to be placed at
an offset from the start of flash. This is useful for situations,
such as with a bootloader, to allow the image to not occupy the very
beginning of flash.
Complement this by adding a CONFIG_FLASH_LOAD_SIZE config, that can
constrain the size of the flash image. With the default of zero, the
behavior is as before, with the image allowed to occupy the rest of
the flash. It can also be defined to a non-zero value which will
constrain the image to occupy that many bytes of flash.
Although this is defined generally, it is currently only supported on
cortex-m targets.
Change-Id: I6e4a0e79c8459f931cd4757c932d20dac740f5f6
Signed-off-by: David Brown <david.brown@linaro.org>
__BYTE_ORDER__, __ORDER_BIG_ENDIAN__ and __ORDER_LITTLE_ENDIAN__ are not
defined when building with xcc, but are defined when building with gcc.
Define them conditionally.
Change-Id: Ib205ffee28360aa240d61731b7a3d6f45401b4c1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The SiFive Freedom E310 SOC follows the riscv privilege
architecture specification and hence is declared within
the riscv privilege SOC family.
It also provides support for a riscv
Platform Level Interrupt Controller (PLIC)
Change-Id: I19ff0997eacc248f48444fc96566a105c6c02663
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Updated the riscv-privilege SOC family to account for SOCs supporting
a Platform-level Interrupt Controller (PLIC) as specified by the
riscv privilege architecture.
riscv-privilege SOCs supporting a PLIC have to implement the following
list of APIs:
void riscv_plic_irq_enable(uint32_t irq);
void riscv_plic_irq_disable(uint32_t irq);
int riscv_plic_irq_is_enabled(uint32_t irq);
void riscv_plic_set_priority(uint32_t irq, uint32_t priority);
int riscv_plic_get_irq(void);
Change-Id: I0228574967348d572afc98a79257c697efc4309e
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
It's not entirely clear where the '%P' came from, but the proper,
documented operand modifier for inserting an immediate value without
punctuation is '%c'.
Change-Id: I17346a6c70183ce79e91faa2fbe61e7761dfd513
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently, ARM Cortex-M image ROMs are linked starting at the flash
device's base address (CONFIG_FLASH_BASE_ADDRESS). This prevents XIP
Zephyr applications from being linked to run from elsewhere on the
flash device. Linking Zephyr applications to run from elsewhere can be
necessary when running under a bootloader (i.e., booting into a Zephyr
application from a bootloader, not using Zephyr as a bootloader).
To enable this use case, add a new config option: FLASH_LOAD_OFFSET.
This option directs the linker to treat ROM as if it started that many
bytes from the base of flash on Cortex-M targets. The option defaults
to zero to preserve backwards compatibility.
Change-Id: I64f82aee257c19c2451f9789b0ab56999775b761
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Its current placement was splitting the vector table in half.
Move to rodata, a better place for it. There's no requirement for
it to be in the text section.
Change-Id: I67724b2a26a9cb62c2ccd473cb54c53e4f74dc32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BSS section needs to use AT> in XIP systems otherwise the LMA
addresses in the ELF binary are wrong, leading to issues if we
try to manipulate the binary with objcopy. The GROUP_DATA_LINK_IN
macro does the right thing here.
This was already done on other arches but ARC was missed.
Change-Id: I93748e919e0b68c1ff2dfb4b85b7064a8d980f3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
XCC does neither define __BYTE_ORDER__ nor __ORDER_LITTLE/BIG_ENDIAN__ macros.
This resulted in field preempt of thread.base not correctly built from other
union fields prio and sched_locked, which caused wrong scheduling.
Change-Id: I8566ef4a5cf555906c012c4adc488f9afb26c053
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
