The address type in the periodic adveritising sync
established event is incorrectly set to 0x01
(BT_ADDR_LE_RANDOM) when the address is a resolved one,
where it should have been BT_ADDR_LE_RANDOM_ID.
The address type has been fixed by offsetting by 2 to get
BT_ADDR_LE_PUBLIC_ID or BT_ADDR_LE_RANDOM_ID when the
address has been resolved.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Adjust skip value so that there is minimum of 6 events that can be
listened to before Sync_Timeout occurs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant assertion check, and minor indentation fix
to correct the alignment of function call.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to Bluetooth 5.3 Vol 4, Part E section 7.7.65.21 the
Controller should send an IQ report with Packet_Status set to 0xFF
and Sample_Count to 0x0, to inform Host that it is not able to
store IQ samples for all received Constant Tone Extensions and has
failed to sample at least once.
This commit adds handling of such situation for direction finding
in connectionless mode in lower link layer. It includes:
- lack of node_rx_iq_report to store IQ samples,
- lack of free node_rx to report received advertising data (generates
an advertising data report with indication "incomplete, no more to
come" and cancels reception of chained PDUs,
- cancellation of chained PDUs reception due to other scheduling
reasons.
In all of these situations CTE reception must be enabled and number of
received CTEs is smaller than requested by Host.
If there is not sufficient number of node_rx_iq_report nodes and
report was generated, the CTE will not be samples in a given
periodic advertising synchronization event. The CTE will be
sampled again in next event if there are node_rx_iq_report available.
End user applications may check periodic advertising sync event
counter when use of the reports to be sure about sync event
the received report is connected with.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When radio event prepare is cancelled due to preemption by
overlapping radio events, the extra done event processing
was missing and hence the use of accumulated prepares'
skip/latency count.
This caused the check for supervision timeout and sync
lost not be aware of the elapsed events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add 'U' to a value when assigning it to an unsigned
variable.
MISRA-C rule 7.2
Relates to commit b97db52de7 ("misra-c: Add 'U' to
unsigned variable assignments in subsys/").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add implementation in Periodic Sync LLL abort to use near
fair scheduling to ensure overlapping multiple Periodic
Sync set each get to use the radio and not lead to Sync
Loss.
The implementation is used when overlap in radio event
happens in unreserved time space of the event. An abort
count is maintain in each Periodic Sync instance and is
used to decide whether the current event or the next
event is to be aborted when they overlap.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig to use minimal time reservation for auxiliary
and sync PDU reception. A peer device could be scheduling
multiple advertising sets in a short duration with small
PDUs hence using the minimal time reservation would avoid
skipping closely scheduled reception of multiple auxiliary
PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use minimal time reservation for auxiliary and sync PDU
reception. A peer device could be scheduling multiple
advertising sets in a short duration with small PDUs hence
using the minimal time reservation would avoid skipping
closely scheduled reception of multiple auxiliary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Current implementation of ll_sync_create_cancel does not allow to stop
synchronization after ull_sync_setup is called. When that is done,
sync->timeout_reload is not zero and the ll_sync_create_cancel will
return BT_HCI_ERR_CMD_DISALLOWED. That means the Controller is able to
cancel periodic advertising synchronization only in period between
call to ll_sync_create and reception of AUX_ADV_IND that has SyncInfo
field.
The Controller should be able to cancell synchronization until first
AUX_SYNC_IND PDU is received and host notified about synchronization
established.
Complete information about synchronization status is provdied by two
ll_sync_set members: node_rx_sync_established and timeout_reload.
These two members of the structure were used in ll_sync_create_cancel
function to do a proper cancel and cleanup.
The node_rx_sync_established member was not cleared when sync was
established or expired. That was required to get a proper information
about synchronization state.
Besides that, to avoid race condition between ll_sync_create_cancel
and ull_sync_established_report, the latter function was extended
to check if cancel operation or sync lost has happened.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The SYNC_STAT_READY_OR_CONT_SCAN state into two: SYNC_STAT_READY
and SYNC_STAT_CONT_SCAN. The connected state was used for two
cases:
- synchronization with periodic advertising is already established,
- CTE type is wrong but periodic advertising list is used to filter
synchronized devices.
In the past states were connected because there was only one difference
between them. In case of sync already established, Controller generated
sync report notification to host.The sync was not terminated when
Controller was about to continue search for other periodic advertiser.
The state was split because now Controller terminates sync ticker and
continues search for other periodic advertised. The split improves
readability and makes code easier to understand.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In case of use of filtering based on: periodic advertising list and
CTE type, the synchronization can hang. That is possible if a periodic
advertiser uses wrong CTE type. In such situation the sync is not
released in ull_sync_done call. What more the sync->timeout_reload
is not cleared and Host is not able to cancel the synchronization.
The periodic advertising is in a semi-sync-established state.
There are no reports send to Host. Host can't use the sync set to
synchronize with other device. It is only able to terminate the
sync (call to ll_sync_terminate).
To fix the issue following changes should be applied:
- isr_rx_adv_sync_estab should call isr_rx_done_cleanup
with sync_term parameter in case the sync_ok isn't SYNC_STAT_ALLOWED.
In any case the CTE type is wrong, no matter is the periodic
advertising list filtering is enabled or not.
- ull_sync_established_report should set sync->is_term to true
in case the CTE type is not allowed. That change is required for devices
that do not support Direction Finding Extension. For those devices CTE
type based filtering is done in ULL by ull_sync_established_report
function. The sync->is_term should be set unconditionally, hence is
moved up in the function.
With these two changes done, ull_sync_done function will execute
sync_ticker_release in case the CTE has wrong type. ULL, depending on
notifications prepared by ull_sync_established_report, will follow up
on sync termination if required.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix missing return value check when Periodic Synchronization
Auxiliary PDU reception has already been stopped, this can
be due to PDU reception in LLL completing while stop has
been requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising Synchronization time reservation
updated when enabling/disabling direction finding IQ
sampling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to be able to establish synchronization
when scan filter accept list is in use and periodic
synchronization needs to be established using specified peer
address or using periodic advertiser list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use ticker yield interface to allow chain PDU reception that
overlaps with currently reserved time for received PDU.
Without the yield ULL scheduling to receive auxiliary PDU
fails to be scheduled using ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix generating periodic advertising reports post sync
terminate under race condition when disabling reporting or
terminating the sync or while performing HCI reset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix auxiliary context leak on stop, under race condition
where ULL High execution context does not release the
auxiliary context as stop has been requested, and done
has decremented the auxiliary context's reference count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of sync create association with scan
context when associated with both 1M and Coded PHY contexts,
and sync create cancel is called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use connection interval units of 1250 us for periodic
scheduling of Extended Advertising auxiliary PDU events so
that auxiliary events can be periodically grouped alongwith
the Periodic Advertising Events. This will permit
mitigating overlaps amongst them.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Periodic advertising sync may be created with CTE type filtering
enabled. When received AUX_SYNC_IND, there are HCI_LE_Periodic_-
Advertising_Sync_Established and HCI_LE_Periodic_Advertising_Report
events generated. In case received AUX_SYNC_IND has wrong CTE type,
HCI_LE_Periodic_Advertising_Sync_Established event is generated.
There may not be HCI_LE_Periodic_Advertising_Report event generated.
In this case node_rx, prepared by LLL, was not released in ULL.
It was lost in ull_sync_established_report.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix Periodic Advertising Synchronization lost implementation
to avoid processing done event twice in cases of overlapping
events or race between sync terminate being requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation to generate Periodic Sync Failed to be
Established when Sync Established message could not be
generate due to lack of free node rx buffers and when there
is sync lost before sync established message could be
generated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Sync Terminate implementation for race
conditions with ULL scheduling by using a flag to stop any
new ULL scheduling to receive chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the same peer periodic sync check to after check for
existing periodic sync create on both 1M and Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to limit Periodic Advertising data to a
configurable maximum length when generating HCI reports.
Bluetooth Test Specification defines Scan_Max_Data value
in IXIT. When HCI LE Periodic Advertising Report events are
generated by assembling the chain PDUs, the test cases
expect that if the data length is no more than
Scan_Max_Data, then at least once the IUT shall not
truncate the data in the advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename per_scan field in scan context to periodic field to
avoid confusing with abbreviation for peripheral.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There are multiple places where double buffer is used in controlers
code. This commit adds generic implementation of the double buffer.
It can be used in future in all places where the data structure is
in use.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Update support for Periodic Advertising Synchronization
Receive Enable command, so that PDUs are received so that
contents of Extended Common Payload Format is parsed and
process for information like Channel Map Update and BIGInfo.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising Synchronization Auxiliary context
leak when failing to receive chain PDUs.
Auxiliary context has not being associated with sync context
when ULL scheduling was used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising Synchronization to private address
when public and static identity address is supplied as peer
device address to synchronize to.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines for AD data format field sizes and offsets when
populating AD data format in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
