The original issue is fixed some time ago, so re-enable the
test.
This reverts commit 52992b0658
("tests: skip the cpu_idle test for nsim_hs_smp")
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The kernel/context test_timer_interrupts() test has a loop calibration
phase to estimate the number of loops needed for 1 system tick.
By initializing this calibration to 1 instead of 0, we can avoid an
edge condition where the calibration phase indicates 0 loops are
required (a case that could happen when running on a slow simulator).
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Clang complains when an unsigned value is passed to abs, even though there
is an implicit cast to a signed type. Insert an explicit cast to make clang
happy.
Signed-off-by: Keith Packard <keithp@keithp.com>
A new Z_SPIN_DELAY() macro has been added which
can be used to reduce a bit the amount of noise
due to the POSIX arch need to break busy loops with
k_busy_wait().
Use it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In test_busy_wait and test_k_sleep test cases of
tests/kernel/context test we measure not only execution time of the
primitives itself (k_busy_wait and k_msleep respectively) but also
the overall test thread execution time.
The issue here is that we do printing in test threads which
means that we do printing in time-critical sections. That breaks
test if we do printing via some device which isn't fast enough.
Fix that by removing print from time-critical section
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This test was written to idle for exactly 1ms and wake up with zero
error, which is just too tight for some platforms (and worked on
emulators where the tick rate is 10x coarser only because 0 == 0!).
And it's not clear that it's testing anything we promise in
documentation, regardless. Early wakeups are not an error and
absolutely not disallowed, yet the test is treating the wakeup like a
sleep.
Clean it up a bit and relax the tolerance to what we can compute
reliably: do all the math in ticks, idle for 10ms (i.e. longer than a
host quantum for emulators), and allow 1 tick of slop on either side to
permit slightly early wakeups while still verifying that "yes, the idle
did idle".
Fixes#46641
Signed-off-by: Andy Ross <andyross@google.com>
As with previous commit, make the timer irq a simple integer variable
exported by the timer driver for the benefit of this one test
(tests/kernel/context).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test has gotten out of control. It has a giant #if cascade
enumerating every timer driver in the Zephyr tree and extracting its
interrupt number. Which means that every driver needs to somehow
expose that interrupt in its platform headers or some other API.
Make it a simple integer variable exported by the timer driver for the
benefit of this one test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Validate the behaviour of `k_can_yield` in pre-kernel, ISR, and idle
thread and standard thread contexts.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Skip kernel_timer_interrupts when CONFIG_TICKLESS_KERNEL
is disabled, because timer won't generate interrupts
anymore after invoking irq_disable and irq_enable
to enable timer interrupt again in TICK mode.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
test_kernel_cpu_idle assumes that CPU's next timer wakeup will be
1 millisecond in the future based on kernel timer it sets. Move tick
synchronization delay into test loop so this will always be the case.
Fixes#41347
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Upcoming changes from Andrew that add a global timeout to the kernel
broke because of some voodoo behavior in the kernel/context test. It
will use arch_irq_disable() on the timer interrupt directly to prevent
interrupts and measure timekeeping in their absence. But some
architectures[1] don't reliably deliver interrupts that arrive, which
means that a running timeout that exists across this period will
result in a corrupt timeout queue.
Document that rule for architectures, move the offending test to the
end of the test suite (to minimize the chance of interacting with
other test code) and put a giant warning about the situation on it.
Long term, we may want to rework this test to do its job in other
ways.
[1] On x86, the interrupt disable happens at the IO-APIC level, while
interrupt latching and delivery is downstream in each CPU's Local
APIC. An IO-APIC masked interrupt is completely invisible to the APIC
and can never be delivered once the line goes low.
Fixes#31333
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For a while now, we've had two APIC drivers. The older was preserved
initially as the new (much smaller, "new style") code didn't have
support for Quark interrupt handling. But that's long dead now. Just
remove it.
Note that this migrates the one board using this driver (acrn) to
CONFIG_APIC_TIMER instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There are now two timer drivers available for various xtensa
platforms. Select based on their driver and not the architecture.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Align to ticks so the first iteration sleeps long enough
(k_timer_start() rounds its duration argument down, not up,
to a tick boundary)
Fixes#28319
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Work around an issue where the emulator ignores host OS
signals when inside a `wfi` instruction.
This should be reverted once this has been addressed in the
AARCH64 build of QEMU in the SDK.
See https://github.com/zephyrproject-rtos/sdk-ng/issues/255
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Wait For Interrupt (WFI) instruction ARM Cortex-M1 CPU does not
operate as a powersave instruction. It is always executed as a NOP.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Because the sleep instruction issue for nsim_hs_smp, idle
loop is used to simulate behavior of sleep, so arch_cpu_idle will
forever loop. This causes cpu idle test loop, then the whole
context test timeouts.
as a fix, skip the cpu_idle test for nsim_hs_smp now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The commit b7e363661d added an additional
busy wait call in the `busy_wait_thread` function -- effectively making
the minimum time required for the thread to exit twice that of the
original implementation.
This commit updates the busy wait thread completion timeout to reflect
that change.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Set the TICK_IRQ on litex and rv32m1 based on DT_IRQN(). For litex we
use DT_NODELABEL(timer0) and on rv32m1 we use DT_ALIAS(system_lptmr) to
determine the timer device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We fix the kernel.context test, so it tests the
implementation of k_cpu_idle for tickless kernel.
As most platforms now support tickless kernel by
default, this extension of the test is essential
to get coverage on k_cpu_idle() API.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The `xlnx,ttcps` binding, despite having the file name of
`xlnx,ttcps.yaml`, had the compatible property of `cdns,ttc`.
While it is true that the Xilinx ZynqMP platform embeds the Cadence
Triple Timer Counter (TTC) IP core, its TTC differs from the original
Cadence core in that it implements 32-bit counters, instead of the
16-bit counters defined in the original; hence, the Xilinx variant is
not compatible with the original Cadence version and should be treated
as a different device.
This commit changes the `xlnx,ttcps.yaml` compatible property to
`xlnx,ttcps` for the above reasons.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
ARM cores may have a per-core architected timer, which provides per-cpu
timers, attached to a GIC to deliver its per-processor interrupts via
PPIs. This is the most common case supported by QEMU in the virt
platform.
This patch introduces support for this timer abstracting the way the
timer registers are actually accessed. This is needed because different
architectures (for example ARMv7-R vs ARMv8-A) use different registers
and even the same architecture (ARMv8-A) can actually use different
timers (ELx physical timers vs ELx virtual timers).
So we introduce the common driver here but the actual SoC / architecture
/ board must provide the three helpers (arm_arch_timer_set_compare(),
arm_arch_timer_toggle(), arm_arch_timer_count()) using an header file
imported through the arch/cpu.h header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
