Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added Kconfig options to make the various PACS characteristics that are
optionally notifiable selectable as notifiable. Selecting a
characteristic as notifiable will make it so for all pacs instance on
the device.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The number of subgroups the scan delegator supports should
match the number of subgroups the broadcast sink supports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Rename the bt_codec struct to bt_audio_codec_conf or
to the new struct bt_audio_codec_cap.
Rename the bt_codec_data to bt_audio_codec_data.
The purpose of this is to split the codec specific configuration
and codec capabilities into seperate structs, as they do not
reflect the same values, or used for the same purpose.
This commit depends on the preset macros workings on either
type of struct (for now), but will be modified in future updates.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some values have been reduced and some have been increased to
better follow the audio configurations in BAP and support
more incoming data.
Also removes HRS as that is not used by LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from tests. It has
been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Added Kconfig options to make HAS characteristics that has notify as
optional property selectable and thus optional. These settings are
global, meaning that a chosen notify property will be used for all
registered has instances.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add support for long writes for the unicast client and server.
This reuses the ATT buffer for long reads.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After removing the high default for MCS, it was discovered that
the TBS client requires a significant amount of buffers to work
properly as well. Added the requirement as a build assert that
depends on which optional TBS client features are enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A recent change in MCS significantly reduced the requirement
of L2CAP_TX_BUF_COUNT and should now work with any value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This change makes VCS Volume Flag characteristic Notify property
optional and selectable through Kconfig.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add configurations where CONFIG_BT_AUDIO_TX and CONFIG_BT_AUDIO_RX
are disabled.
Fixes issues found in the BT shell implemented caused by these
configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove qemu_cortex_m3 from various bluetooth tests and samples since
they enable NVS which requires CONFIG_FLASH_PAGE_LAYOUT which is
not supported on qemu_cortex_m3 since there is no flash driver.
We get build failures with the arm-clang compiler because nvs.c
is referencing z_impl_flash_get_page_info_by_offs which does not
exist.
Switch to qemu_x86 as the integration_platforms if it was
qemu_cortex_m3 before.
Removed the bluetooth.mesh.mesh_shell.reduced_legacy as this was
added specifically for building on qemu_cortex_m3.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
There is no requirement that HRS shall be on a peripheral device
as far as I can tell, and as such the device with HRS may not
be a GAP Broadcaster. Guards the advertising with
CONFIG_BT_BROADCASTER.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The native_posix board can also be used for audio, and
thus should have LC3 support similar to the nrf5340.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_audio_server API to bt_bap_unicast_server
and move API to bap.h.
This also adds the _bap_ infix for bt_unicast_server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes the unused pac_pache from the unicast_client.
This moves the storing of the PAC records (in the form of
struct bt_codec) from the stack to the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If either the sink or source ASE count was zero, calls to
ARRAY_SIZE(srcs) or ARRAY_SIZE(sinks) would cause a build warning.
The arrays should actually not be there at all if the respective
ASE count was 0, as that is just a waste of memory. The arrays,
and all uses of them, have been properly guarded.
This also adds a build assert to ensure that at least one
of them is non-zero, and that we also test building either
of them with the value 0.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix all comments-indentation errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(comments-indentation)'
This checks that the comment is aligned with the content.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This changes HAS registration to be dynamic and let's the
application set Hearing Aid Type and binaural features.
Often, devices are flashed with generic firmware with some
features stored post factory production, requiring
the settings to be moved from compile time to run-time.
This change will increase the RAM usage as the GATT
service is moved from ROM to RAM.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Co-author: Soren Engquist <soren@engquist.dk>
Add support for 3 connections. Mainly we need to support
at least 2 connection to use the CSIP Set Coordinator role,
but some sets may also be 3 or even larger.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The VCP server, known as the volume renderer, has a
more explicity bt_vcp_vol_rend API naming scheme now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renames almost all occurences of VCS to VCP, as we want to
use the profile as the namespace for volume control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
