CONFIG_ETH_NATIVE_POSIX is deprecated in favor of
CONFIG_ETH_NATIVE_TAP, let's replace it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This should allow an issue such as #86681 to be found earlier for a not
widely used config.
Signed-off-by: Etienne de Maricourt <edmecomemail@gmail.com>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace a few references to native_posix / the native_posix ethernet
driver with native_sim, or native_tap.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename this driver to eth_native_tap, including renaming all its
options.
The old options remain until v4.4, but as deprecated.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Lookup the address of the SNTP server through DNS instead of requiring
a server to be running locally.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Networking events may have been triggered before `wait_for_network` was
called. Resend the status events after the callbacks have been
registered.
Signed-off-by: Jordan Yates <jordan@embeint.com>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
Remove the twister support for native_posix[//64] and therefore all
references to them from the testcases and samples yamls, so twister
does not error out.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This driver was deprecated and must be removed by Zephyr version
4.1 according to lifecycle/release guidelines.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Call coap_client_cancel_requests() before closing the client socket so
that all activities on that socket are ceased before close. This
prevents POLLNVAL error from being thrown by the coap_client thread and
error being printed in the sample output.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In the above file, Building,Flashing and Running section is using
:zephyr-app: as samples/boards/espressif/deep_sleep.
But it should be samples/net/wifi/apsta_mode.
Fixes: #85505
Signed-off-by: Ram Mahesh <rammaheshram1234@gmail.com>
Add frdm_mcxw7 board conf and overlay files for echo_client and
echo_server sample applications.
Signed-off-by: Andrei Menzopol <andrei.menzopol@nxp.com>
Decouple dependency of CONFIG_NXP_WIFI_SOFTAP_SUPPORT.
Add wifi defconfig to set default kconfig options when soft AP
enabled.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Current DSA sample is initially for ip_k66f board with a switch PHY,
while it is expected as a common DSA sample for all DSA devices.
This patch does not change any function. It only reworks the sample
with new added CONFIG_NET_SAMPLE_DSA_LLDP for ip_k66f with 3 LAN
ports.
Ideally this should be common for all DSA devices, but for now, ip_k66f
is the only platform supporting it.
As there will be more DSA functions supported, better to allow each
function enablement via option to suit hardware or device driver support
status.
Also improved dsa_ll_addr_switch_cb return value with enum value instead
of plain value.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
"ca.der" contains an RSA key, but this file is now useless for this sample
as the sample is using EC keys. It's likely a leftover from some initial
development, so it can be removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a section with a practical example on how to build the sample in
order to test it with:
- real device
- ethernet over USB
and test it with a Linux host system.
Fix also references to overlay files that must be enabled to build the
HTTPS version.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit also moves the TLS (overlay) configuration to a separate file
named "overlay-tls.conf". In this way the simple HTTP (without TLS) will
not enable Mbed TLS.
A new test case is added to sample.yaml to test HTTPS scenario.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The sample needs a bit more resources. The existing build
assert complains about this
error: static assertion failed: "CONFIG_ZVFS_POLL_MAX must be larger than
((1 + (2 + 0)) + (3 + 3) + 0)"
include/zephyr/net/dns_resolve.h:146:1: note: in expansion of macro
'BUILD_ASSERT'
146 | BUILD_ASSERT(CONFIG_ZVFS_POLL_MAX >= DNS_DISPATCHER_MAX_POLL,
| ^~~~~~~~~~~~
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
VLANs need to be initialized before the wait_for_network() call
so that VLAN interfaces are ready at the start.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Since a separate CONFIG_NET_TC_RX_SKIP_FOR_HIGH_PRIO was introduced for
RX TC queues, CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO became ambiguous,
rename it to CONFIG_NET_TC_TX_SKIP_FOR_HIGH_PRIO and deprecate the old
config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's no point building the sample for platforms that do not support
networking, hence add netif dependency to reduce the CI execution
scope.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A _res_fallback parameter to HTTP_SERVICE_DEFINE is added to optionally
specify a fallback resource detail, which will be served if no other
resource matches the URL.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
This issue is seen by at least gcc 11.4.0
samples/net/sockets/http_get/src/http_get.c:44:40: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2
has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
44 | #define CHECK(r) { if (r < 0) {
| printf("Error: %d\n", r); exit(1); } }
| ^~~~~~~~~~~~~
samples/net/sockets/http_get/src/http_get.c:44:49: note: format string is
defined here
44 | #define CHECK(r) { if (r < 0) {
printf("Error: %d\n", r); exit(1); } }
| ~^
| |
| int
| %ld
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change the name of the mimxrt1060_evk conf file (mimxrt1060_evk.conf) to
the correct name, "mimxrt1060_evk_mimxrt1062_qspi.conf". This change
causes net related code to be placed into ITCM on mimxrt1060_evk boards
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
In order to show how to use OpenThread and CoAP, add an application.
This example could be build to run a client or server.
The server could expose LEDs and buttons and client could get their
state and set the LEDs state.
The network is created automatically using the network key predefined
in the config. The goal is to make the example simple by removing
the commisionning and joinning process.
If a client application has a button, it could use it to toggle the first
LED on any boards running the server application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
This sample is expected to hit google.com so that the reply
(a redirect) is minimal and can easily be visualized. This is also
what sample.yaml expects to see (checks for "The document has
moved").
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add support for the pinnacle_100_dvk and mg100.
With these boards, wait to get on the network before trying
to connect to AWS.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Add overlay and small adjustments for using the hl7800 modem.
Works out of the box with pinnacle_100_dvk and mg100.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Add an overlay for hl7800 modem configuration.
Adjust the client to wait until the network is ready before
trying to connect to the lwm2m server.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
