-Mbed TLS has come up with its own naming-convention with regards
to certain Mbed TLS configurations for TLS/DTLS and X.509. This
commit fixes a couple of them by depending on MBEDTLS_BUILTIN
which is set when Kconfig.tls-generic is used
1. Make MBEDTLS_PEM_CERTIFICATE_FORMAT depend on MBEDTLS_BUILTIN
The proper name for this functionaity is MBEDTL_PEM_PARSE_C and
MBEDTLS_PEM_WRITE_C
2. Make MBEDTLS_SERVER_NAME_INDICATION depend on MBEDTLS_BUILTIN
The proper name for this is MBEDTLS_SSL_SERVER_NAME_INDICATION
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
-PSA_WANT_ALG_CMAC must be set for PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
to be valid. This commit fixes this mismatch for hostap
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
MDK 8.70.0 introduced following changes in the device naming:
- renamed nRF54L20 Eng A to nRF54LM20A Eng A
- renamed nRF54L09 Eng A to nRF54LV10A Eng A
Actual SoC renaming will happen in followup PR.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
As of today, nrfx components are selectable depending if devicetree has
a certain compatible or not, and in case of IP that can operate in
multiple modes, nodelabel+compatible. An example of the later is:
```
config NRFX_SPI0
bool "SPI0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPI))
select NRFX_SPI
config NRFX_SPIM0
bool "SPIM0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIM))
select NRFX_SPIM
config NRFX_SPIS0
bool "SPIS0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIS))
select NRFX_SPIS
```
These symbols are later selected by e.g. SPI driver if `spi0` node is
enabled. While this works in the Zephyr context, it can be a problem in
applications using nrfx directly in the application layer, unless they
tweak devicetree. For example, if devicetree `spi0` node defaults to
`compatible = "nordic,nrf-spim"`, NRFX_SPI0 or NRFX_SPIS0 won't be
selectable, but an application using nrfx directly doesn't really care
about what is defined in devicetree as it is effectively bypassing it.
It just wants to select e.g. `CONFIG_NRFX_SPI0=y` and forget about the
rest.
This patch fixes this problem by just checking for the existence of
certain nodelabels.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added additional analog channels for ADC and COMP/LPCOMP and new pin
functionality mapping for TDM.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Remove `select FILE_SYSTEM` from `WIFI_NM_WPA_SUPPLICANT`, originally
added in 3fc932c5. The selection is not required by any tests, and does
not appear to be used by any code in the module.
Signed-off-by: Jordan Yates <jordan@embeint.com>
CMSIS modules dsp and nn sets the optimization flag -Ofast for their
libraries. I've now made a new compiler property optimization_fast to
avoid using ifdefs in the cmsis CMakeLists.txt files.
I've update GCC and arcmwdt (not sure if arcmwdt supports -Ofast)
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
A PSA crypto operation object can be initialized in multiple
ways according to the documentation. For example,
1. Using a dedicated psa_xxx_operation_init() function that
returns an initialized object.
2. Using memset() to zero out the operation object.
For some PSA crypto driver implementations, using the first
method causes an excessive stack usage if the operation
object is large and psa_xxx_operation_init() is not inlined.
Instead, it is better to stick to memset() for this purpose.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
To ensure that the accesses to the radio peripheral are done with
predictable timings, the constant latency must be enabled.
The constant latency mode is enabled alongside the HFXO.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Added option to retry message send over ipc when for example
there is -ENOMEM error (shared memory buffer full).
Number of max retries and delay between them are Kconfigs.
Fixed nrfs error reporting when sending directly over
ipc service, status was not correct when negative value
was returned from ipc service send function.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
Added CONFIG_AMBIQ_COMPONENT_USE_BT and CONFIG_SOC_AMBIQ_BT_SUPPORTED
to fix empty zephyr_library() warning when BLE is not needed for compile.
Added CMake message if BT related Ambiq specific Kconfig is overriden for
not supported SoC.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
With introduction of OSAL wrapper for memory allocation, usage of
zephyr's native malloc calls need to be removed. When NRF70 driver
is not enabled, OSAL needs to be built explicitly.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Create dedicated memory pools for Wi-Fi management and
data operations (defaults: 20KB for management and 130KB for data).
Setting Data pool to 110KB for non-Nordic SOCs to resolve
RAM overflows seen in twister runs.
Remove the `HEAP_MEM_POOL_ADD_SIZE_NRF70` hint since we are
creating separate heaps for driver and not allocating from
system heap.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Drop the override conditions to ADC_MCUX_12B1MSPS_SAR for imxrt, the
current one causes the driver to be built when it does not have to and
are not needed anyway, and drop the HAS_MCUX_12B1MSPS_SAR option
entirely as it's not needed anymore.
Tested with:
west build -p -b teensy40 tests/lib/devicetree/api_ext
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable MBEDTLS_SHA384 support to use of RSA3K + Suite-B, that
is required by WPA3-Enterprise.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The segger cmake linker script is out of date compared to
segger_rtt.ld. This is causing linker failures with IAR
when segger is enabled (on nrf hardware for example).
Signed-off-by: Carl Eriksson Skogh <carl.erikssonskogh@gmail.com>
Deprecate NRFS_LOCAL_DOMAIN_DVFS_SCALE_DOWN_AFTER_INIT option for
scaling down CPU frequency during dvfs handler initialization.
Clock control API is managing access to DVFS and DVFS should not
be controlled bypassing this API. Deprecated feature will be added in
the clock control.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
We need to make sure that within Zephyr different users of the PSA APIs
don't interfere with each other because of using the same numerical IDs
for persistent assets.
This takes care of the PSA key IDs when using persistent keys through
the PSA Crypto API.
See the comments in `<zephyr/psa/key_ids.h>` for more information.
This removes the recently-introduced Kconfig options that allowed changing
the base IDs subsystems were using for their persistent keys.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Pull latest revision of the uoscore-uedhoc module and align
corresponding CMake file with the changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Honor Kconfig option `BT_CTLR_TX_PWR_ANTENNA` for limiting the maximum TX
power. The default value for this option is 0 dBm, which means that after
this change the actual TX power is likely lower than before, unless
increased by this option.
Signed-off-by: Kalle Kietäväinen <kalle.kietavainen@silabs.com>
Introduce two new kconfig options in order
to be able to define custom named fatfs
mount points. If activated replace the static
FF_VOLUME_STRS approach with the runtime
generated VolumeStr array containing those
mount points.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Add Clock Control driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
In case interface is UP, the interface is added to WPA supplicant in the
iface_wq itself and the max stack size is 4264, so, increase the stack
size of the iface_wq.
If the interface is added via net_mgmt thread then it works fine.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update Cmake to include hal EMDRV header
It also adds dmadrv source when CONFIG_SOC_GECKO_LDMA is selected
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
This driver allow to use Zephyr native IP stack or the IP stack provided
by HAL / WiseConnect.
The WiseConnect implementation may take advantage of the specific
features provided by the 917 (power consumption, speed,
validation...).
Some notable features are not available with this interface:
- It seems Zephyr does not provide API to offload multicast membership
management. User should be to directly call WiseConnect APIs
- Support for ICMP frames is difficult. Note that WiseConnect
automatically answer to ping request. It is just not possible to
send ping requests and receive ping responses.
- Zephyr and WiseConnect both support TLS offloading. However this
patch does not implement it.
- Reentrancy in the WiseConnect side is uncertain.
This implementation has been tested with samples/net/wifi/ (which relies
on subsys/net/lib/shell).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Driver was tested with a custom application which enabled the BT_SHELL.
Basic functionalities were verified:
- Scanning
- Advertising
- Connecting
Configuration needed for the test:
- CONFIG_BT=y
- CONFIG_BT_PERIPHERAL=y
- CONFIG_BT_CENTRAL=y
- CONFIG_BT_SHELL=y
- CONFIG_SHELL=y
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Network Processor (NWP) is used to run WiFi, Bluetooth and Flash
drivers.
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Implement DMA driver for siwx917 using UDMA peripheral. For now,
Scatter/Gather DMA is not yet supported.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Support for random number generator is required for most of the
cryptographic operations, including support for WiFi and TLS.
This driver has been tested with tests/drivers/entropy:
*** Booting Zephyr OS build v3.7.0-4339-g1ec5ce05f9f8 ***
Running TESTSUITE entropy_api
===================================================================
START - test_entropy_get_entropy
random device is 0x8217298, name is rng@45090000
0x93
0x3e
0xf1
0x68
0xd4
0x22
0xbf
0x4d
0xad
PASS - test_entropy_get_entropy in 0.012 seconds
===================================================================
TESTSUITE entropy_api succeeded
------ TESTSUITE SUMMARY START ------
SUITE PASS - 100.00% [entropy_api]: pass = 1, fail = 0, skip = 0 ...
- PASS - [entropy_api.test_entropy_get_entropy] duration = 0.01 ...
------ TESTSUITE SUMMARY END ------
===================================================================
RunID: d1547c805699201af769cb01331efcce
PROJECT EXECUTION SUCCESSFUL
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Added new parameter "A" in wifi connect command to support
CA certificate used or CA certificate skipped for
EAP-TTLS-MSCHAPV2 and EAP-PEAP-MSCHAPV2.
Signed-off-by: Qingling Wu <qingling.wu@nxp.com>
Due to internal dependencies on other modules init priority
the 802.15.4 priority level must be increased. Former init
priority caused the module to be initialied before those
it depends on, so that lead to hard faults.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
