All IEEE 802.15.4 drivers are now automatically enabled if they are
'okay' in DT and all of its dependencies are 'y', including
CONFIG_IEEE802154. This means individual driver enablement is not
necessary anymore in Kconfig.defconfig files or samples/tests. Boards
need to still make sure any dependencies are enabled, e.g. SPI bus in
some cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The magic_want sample requires I2C bus to be enabled (used sensor is
connected to the bus).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a polling sample for 3-Axis accelerometers.
This sample demonstrates how to data fetch and print to the console.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Small update to have the central_multilink sample work correctly
with extended advertising (when enabled)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
samples should not use CONFIG_TEST_EXTRA_STACK_SIZE, instead, they
should set the recommended stack size directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For further details about interoperability testing please see
* https://lwm2m.openmobilealliance.org/ - Test V1.1 12-Sep-2019
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Make sure that the network interface is up before running the sample.
Otherwise, the sample could stop rightaway due to send failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
First off, fix the FD check when closing a socket - currently not all
sockets were closed on exit (0 is also a valid file descriptor).
Second issue is the use of k_thread_abort() on tx/rx threads. The
receving thread was blocked in recv(), and aborting its thread prevented
it from ending gracefully (i. e. the socket mutex allocated in recv()
was not released as the function did not exit properly). This resulted
on a consecutive `close()` call lock. Fix this by setting a timeout on a
receiving socket, and instead of aborting threads allowing them to exit
gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The sample has been defining STORAGE_NODE_LABEL to be used
to point to storage partition, but flash_area_offset has still
been using "storage" directly.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Provide common helper functions to create extended extended Zephyr
Fatal Error functionality in HCI common code.
Use the implementation in hci_rpmsg sample.
The sample didn't provide an information about Controllers assert
or system fatal error to an application code while run with nRF5340
SoC. The goal for hci_rpmsg sample change is to enhance user experience
for conformance testing of the Bluetooth Controller while executed with
nRF5340.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The unicast audio server sample did not set a location value,
and would report an invalid value of 0 when read.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds sample application that can be used as reference
implementation and for HAP qualification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move from using Kconfig GDBSTUB_SERIAL_BACKEND_NAME to a devicetree
chosen property ("zephyr,gdbstub-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Sample has been referencing flash area by its label, but flash device
by chosen `zephyr,flash-controller`, while flash area does not have
to be positioned on a device selected by the chosen directive.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that clock control drivers are enabled based on devicetree we
can remove any cases of them getting enabled by *defconfig and
proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add mps2_an521.overlay so that the example in the README.txt will
actually build. Update README.txt to document needing to have
'zephyr,tracing-uart' property set under chosen node in devicetree.
Fixes#48416
Signed-off-by: Kumar Gala <galak@kernel.org>
Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This add a removes the SPI config
for the stm32H735 and stm32H7b3 disco boards
when testing the octoSPI.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that SPI drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
In order to keep a flashed sample from provisioning forever, the sample
requires the user to press a button to provision a detected device.
The feature is only enabled if the board has a push button connected
via GPIO.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Flash controller has been specified by `zephyr,flash-controller`
chosen DTS, which does not have to be the same controller as
a flash area exists on.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Due to introduction of alias spi-flash0
sha1: 64fbbd9a44
it is necessary to keep quadspi node
Instead of removing quadspi node, remove storage_partition node
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Sample code uses GPIO api's but wasn't enabling CONFIG_GPIO. So
on native_posix this would cause the sample to not build. Add
CONFIG_GPIO=y to prj.conf to fix this.
Fixes#48306
Signed-off-by: Kumar Gala <galak@kernel.org>
This is not a sample of an audio subsystem in zephyr, it is a sample
that completely depends on sof and its audio support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sensor Kconfig sybmols should be enabled if CONFIG_SENSOR=y
and the devicetree node for the sensor is enabled. We can
remove explicitly enabling specific sensor drivers in .conf
files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update sample to use DEVICE_DT_GET_ONE to remove usage of
device_get_binding. Additionally simplfy the sample to
just access a single TH02 device.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move from using Kconfig OSDP_UART_DEV_NAME to a devicetree
chosen property ("zephyr,osdp-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Changed the integration platform for the osdp samples to
stm32_min_dev_black as it already has zephyr,osdp-uart set.
Signed-off-by: Kumar Gala <galak@kernel.org>
The sample requires a manual user interaction. Make CI skipping that by
requiring a remote harness (the user).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
