Echo-server sample should not bail out on failed
accept() calls. This sample should close socket
in case of any errors and keep listening on socket
for further incoming connections.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current sample certs and keys are not signed. Adding
signed certificates and keys. CA file also added.
This helps users to test with different kind of
configurations.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
With a recent change introduced a connectable advertiser will reserve
a connection object when started. In the disconnected callback the
disconnected connection object is not yet released, so the application
is not able to allocate this connection object for a new connectable
advertiser until after the disconnected callback.
reserve conn commit: 46bf20036a
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable CONFIG_TEST so that we get the necessary defines for
console output when a fatal error happens, as well as assertion
checking.
Remove an unnecessary self-abort in main(), this causes an
assert to fail. Letting main() return does the same thing, more
gracefully.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A sample implementing NATS protocol that is not part of the Zephyr
networking subsystem. The implementation is not maintained and only
served as a proof of concept.
Related to #20017
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a sample that demonstrates (and tests) that custom drivers can be
maintained outside of Zephyr.
The sample is fairly minimal with few dependencies and should
therefore be very portable. It also includes a sample.yaml that should
ensure that it does not regress.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There was some unlocked initialization code in the "enc" thread that
would race with the "pt" and "ct" threads if another CPU was available
to run them (it was safe on UP because "enc" entered the queue first
and was cooperative, the others wouldn't run until it blocked).
Move it to main() and remove the enc_state guard variable which is no
longer doing anything.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Replaced NFFS mentions by LittleFS in all <board>.dts comments
to storage partitions.
Replaced NFFS by LittleFS in a few boards documentation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
NFFS configuration was removed.
Added working configuration for nRF boards.
Documentation aligned to fact that littlefs is supported.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch addapt the sample to using LittleFS as the FS back-end.
After NFFS will be removed this ensures mcumgr FS command functionality.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
smp_svr cleanu
Some architectures require more space on the stack when running samples
and tests while the philosopher test (cmsis_rtos_v1) is still using a
fixed-size stack size.
Since the test is going to use CMSIS v1 we cannot directly use
CONFIG_TEST_EXTRA_STACKSIZE to grow the stack size because the extra
space allocated can excess the maximum size allowed by CMSIS and defined
by CONFIG_CMSIS_THREAD_MAX_STACK_SIZE, causing the sample to halt on the
assertion (thread_def->stacksize <= CONFIG_CMSIS_THREAD_MAX_STACK_SIZE).
To avoid this problem (and align the test to what has been already done
on the philosopher test using CMSISv2) we set the stack size to the
maximum allowed size of CONFIG_CMSIS_THREAD_MAX_STACK_SIZE.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add sample demonstrating the integration of CANopenNode in Zephyr to
support the CANopen protocol.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
`TLS_PEER_VERIFY` and `TLS_DTLS_ROLE` options accept specific values,
yet no symbols were defined for them. In result, magic numbers were used
in several places, making the code less readable.
Fix this issue, by adding the missing symbols to the `socket.h` header,
and using them in places where related socket options are set.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This add details how build and flash the application. This diferentiate
between SoC and transceivers to help understand what user need to do to
build and flash successfully.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Create overlay-rf2xx.conf overlay file to enable Atmel rf2xx
transceivers on this application.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move LVGL sample from samples/gui/lvgl to samples/display/lvgl to have
a unified location for display related samples.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Remove ST7789V display sample as there is a unified display sample
in samples/drivers/display.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Remove ILI9340 display sample as there is a unified display sample
in samples/drivers/display.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
SHT3XD_TRIGGER is already being selected by
SHT3XD_TRIGGER_GLOBAL_THREAD, which is enabled in the same configuration
file.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define CONFIG_NET_CONFIG_IEEE802154_DEV_NAME value necessary to enable
atsamr21_xpro board on wpanusb sample.
The documentation was updated referencing the atsamr21_xpro board.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Added harness config to sample in order for the sanitycheck tool
to run and understand whether the samples output is as expected.
Signed-off-by: Łukasz Hejnak <lukasz.hejnak@nordicsemi.no>
Add missing information to existing files in anticipation of whinage
from recently modified CI License checks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
This symbol is select'ed automatically by the X86_MMU, ARM_MPU, and
ARC_MPU symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
These configuration files all enable UART_CONSOLE, which selects
CONSOLE_HAS_DRIVER.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
BT_DEBUG is a promptless helper symbol, defined in
subsys/bluetooth/common/Kconfig. It is selected by BT_DEBUG_LOG, which
these configuration files also enable.
Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The regular expressions used by this test to determine
success or failure get confounded if the log subsystem
drops the wrong messages due to buffers being full.
Just use minimal logging which synchronously logs
everything.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add sample for reading the temperature of a 3-wire PT100 sensor using
the Texas Instruments LMP90100 Sensor Analog Frontend (AFE) Evaluation
Board (EVB) shield.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Correct handling of device encoded temperature values, which combine a
12-bit 2s complement signed value with a separate sign bit. Rework
conversion between device and sensor temperature representations to
support negative temperatures in both domains.
Use a much simpler trigger configuration where the alert is driven by
comparator output, rather than as an interrupt that requires a pair of
I2C transactions to read and clear the flag.
Refactor the trigger infrastructure to use the setup/handle/process
idiom, which reduces duplicated code and to correctly detect alerts
present when the triggers are set.
Completely replace the sample with something that demonstrates
updating upper and lower threshold values to track moving
temperatures.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a sample for the MPU6050 that demonstrates on-demand and triggered
display of all sensor data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When a trigger was enabled the original implementation would do
nothing more than print "Waiting for a threshold event", without
describing what such an event would look like.
Rework to maintain a window of +/- 0.5 Cel around the most recent
in-window temperature, and reset that window whenever a trigger occurs
or a non-trigger reading is outside the window. Time-out and display
the temperature if no event occurs in a reasonable time.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The device address can only be 0x48 through 0x1B. C6 is connected to
the FXOS870 and is not exposed on a header: switch to Arduino D0.
Move this to a boards subdirectory so we can add other overlays
without cluttering the root.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
