When try build updatehub using overlay-dtls.conf system fail with
cannot create privkey.der.inc file, permission denied. Add missing
gen_dir cmake definition. Update updatehub sample test config to
run missing dtls build test.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add both .conf and .overlay files for the nRF51 dongle, which is still
used and was missing configuration files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use non-default frequency 25MHz and Quad mode to ensure
frequency configuration is taking effect.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
An off-by-one error calculating the number of parameter headers caused
a third table to not be displayed.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add DT entry for the embedded QSPI NOR flash (GD25Q16) in the Adafruit
nRF52840 feather. Also added support for the spi_flash sample, which has
been used to verify the device.
NOTE: Device seems to fail when using high clock frequencies (e.g.
maximum QSPI frequency). It may be due to PCB layout issues.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Instead of unknown clock accuracy, set it to 1ms for native_posix
boards. This looks better in TSN monitor.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add gPTP multiport support to native_posix Ethernet driver.
This means that the driver is able to create more than one
network interface and enable gPTP to each of them. This requires
that net-tools is updated as it contains configuration file
for network interfaces in host side.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add overlay that includes only the shell transport of mcumgr, without
bringing in BLE as well. This can be used as an alternative for the
serial transport. The `smp_svr` README was updated accordingly.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Value of ret has been overwritten by flash_write_protection_set
before it could be returned from do_write_unaligned, which could
lead to reporting success when error code should have been returned.
Fixes#27641, Coverity-CID: 212142
Fixes#27642, Coverity-CID: 212143
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add a tag at sample.yaml to exclude the platform mec15xxevb_assy6853
because of unsupported. Refer github issue #27576.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Create two threads, one for receiving packet socket data and
the other for sending raw Ethernet frames.
Add flood option where it is possible to stress test the IP
stack. Flooding is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A zero value in the NPH header indicates one parameter header.
Increase the upper bound to process the last provided table.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
GPIO CSn active level transitioned from default active-low to
devicetree defined since the last time this sample was verified,
requiring the flags parameter in devicetree to be updated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The boards efr32_radio_brd4104a, efr32_radio_brd4250b and
efr32mg_sltb004a have an on-board nor flash. It is already present in
the device tree, only the driver needs to be enabled.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Its possible to rename the executable we build via the Kconfig symbol
CONFIG_KERNEL_BIN_NAME. So we really should use ${KERNEL_ELF_NAME},
${KERNEL_BIN_NAME} and ${KERNEL_HEX_NAME} variables instead of hardcoded
zephyr.elf, zephyr.bin, and zephyr.elf.
This fixes an build issue with
tests/misc/test_build/buildsystem.kconfig.utf8_in_values on
up_squared_adsp and lpcxpresso11u68 platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This patch removes unused Kconfig option from console
subsystem. If application wants to wait until the console
port is connected, enabled and ready to receive data
it should use uart_line_ctrl_get() API function and
check for DTR flag.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called once by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
After this patch all pre APPLICATION messages will be dropped
as USB console device is enabled in the application.
Application waits for console device until its ready by checking DTR
flag - uart_line_ctrl_get(). This function could be dropped but then
some log messages that were generated before USB device is ready
could also be dropped.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds a PD sample for drivers/osdp. It receives OSDP commands
and prints a message to console.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
USB device shall be able to send only in CONFIGURED state.
Zephyr USB HID device class allows to send the data no matter
of the USB state what is wrong. Attempting to write to endpoint
buffer in state != CONFIGURED may lead to driver error.
This patch introduces state tracing for USB HID class and
allows to send data using hid_int_ep_write() class API
only if the device remains in CONFIGURED state.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Add a fixture since we need at least two boards connected for this test
to run correctly w/real hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add for various flash runners (pyocd, nrfjprog, and dfu-util) to do a
full chip erase. This is needed for the sample to pass in sanitycheck
on real hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is an additional prj_smp_svr.conf configuration file provided,
which builds an image with mcuboot support. Enable it in sample.yaml,
so sanitycheck can detect build failures in future.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is an optional mcumgr enabled prj_smp_svr.conf configuration
file. Using it results in following errors:
.../src/smp_svr.c:12:10: fatal error: mgmt/buf.h: No such file or \
directory
12 | #include <mgmt/buf.h>
|
Fix include paths to keep sample buildable with mcumgr enabled.
Fixes: c200b1c5e6 ("mgmt: Move mcumgr into its own folder")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Remove dependency on CONFIG_BT_ACL_FLOW_CONTROL and use
CONFIG_BT_L2CAP_RX_MTU always to set L2CAP RX MTU.
The ATT MTU is set from two different KConfig options depending
on if CONFIG_BT_ACL_FLOW_CONTROL is enabled, which makes it
a confusing option and hard to provide a conf file that
supports multiple board configurations.
This changes the behavior when CONFIG_BT_ACL_FLOW_CONTROL and
CONFIG_BT_BUF_RX_LEN was used to set the L2CAP RX MTU, and by
extension the ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix smp_svr Bluetooth configuration for when BT_HCI_ACL_FLOW_CONTROL
option has been enabled. In this case the CONFIG_BT_L2CAP_RX_MTU
is used instead of CONFIG_BT_RX_BUF_LEN to set the RX MTU.
This lead to a negotiated MTU of 23, which is not supported by
the SMP_SVP protocol.
Removed the board specific configuration files as these are just
duplications of the overlay-bt.conf or overlay-bt-tiny.conf and
the readme specifies how these should be used.
Reduced the TX MTU to end up with the same value as the RX MTU,
CONFIG_BT_RX_BUF_LEN - 4 (HCI ACL header) - 4 (L2CAP header).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removes 'flash' command function that displays the command's subset.
Command's subset will still be displayed in current code.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
On large memory areas printing 8 bytes/line is not enough.
Increased printing 16 bytes per line.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Adds unaligned and pattern write functionality.
The reason this was added is chips with large pages, e.g. 256 can't be
normaly writen via shell, thus the need to write a pattern with any
length to a memory area.
The unaligned write command allows writing a data frament in any place
in memory, the data backup, protection, erasing and writing is
automaticaly handled. This makes it easier to test all flash controller
functionality in one command, also write any persistent data to any
flash address.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The previous commits added the SAM0 DAC driver. Now document and
enable it, including enabling it in the DAC sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Fixes#27266.
cmd_hdr and acl_hdr local structs were read but never written.
Causing unpredictable errors in bt_tx_thread such as :
"Invalid HCI CMD packet length" in hci.c:2280
or Imprecise data bus errors on nrf52810.
cmd_hdr and acl_hdr are now filled with the received data
from SPI Master.
Signed-off-by: Corentin Dorothée <corentin.dorothee@gmail.com>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
