For the shell RFCOMM case, these is a stack overflow problem when do
disconnect, so need to increase the CONFIG_BT_RFCOMM_DLC_STACK_SIZE.
Set CONFIG_BT_RFCOMM_DLC_STACK_SIZE default 512.
Signed-off-by: Make Shi <make.shi@nxp.com>
add test for reconfigure, release, suspend, abort and disconnect.
app_config_req and app_reconfig_req always accept the req,
so don't need to handle reject case.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Implement the bt_a2dp_stream_reconfig: Modify reconfig_req callback to
pass codec_cfg to application. Remove reconfig_rsp callback,
config_rsp is used. Remove reconfigured callback,
configured callback is used.
move the status to common struct bt_avdtp_req,
use same bt_avdtp_ctrl_params to process control-like avdtp
cmds (start, open etc), use the same a2dp_ctrl_ind to process
control-like cmds (start, open etc), use the same
bt_a2dp_ctrl_cb to process control-like cmds (start, open etc),
use the same bt_avdtp_ctrl to process control-like cmds
(start, open etc), optimize getting a2dp conn by index,
use sem to replace mutex and optimze the lock codes to be
based on context/instance.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Cmd_register uses a fixed channel as the rfcomm channel. Cmd_register
doesn't require parameters for channels.
Signed-off-by: Make Shi <make.shi@nxp.com>
The user data size of the RFCOMM tx pool is zero. There is not enough
space to put the tx_meta data. Use CONFIG_BT_CONN_TX_USER_DATA_SIZE to
set the data size for the RFCOMM tx pool.
Signed-off-by: Make Shi <make.shi@nxp.com>
In case the peer device has NO SDP record, the result is valid,
but the result->resp_buf is NULL, it would introduce a hardfault.
Therefore, also add a NULL pointer check for result->resp_buf.
Signed-off-by: Make Shi <make.shi@nxp.com>
In current implementation, the SDP response packet will be ignored if
the operation code is `BT_SDP_ERROR_RSP`. And the SDP transaction
request is done, but the application is not notified. And the pending
SDP transaction cannot be processed.
Notify application with empty buffer if the operation code is
`BT_SDP_ERROR_RSP`. And process the pending SDP transaction.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The discovered SDP record of service attribute transaction response
cannot notified correctly. There is an error returned from function
`get_record_len()`.
For service attribute transaction response, only one attribute list
is returned. So the total record length is the buffer length. Return
buffer length directly from `get_record_len()` to fix the issue.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Actively disconnect the connection with error code `BT_HCI_ERR_AUTH_FAIL`
when the notified link key type is not `BT_LK_AUTH_COMBINATION_P256` in
BR SC only mode.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Currently, the minimum value of encryption key size is
`BT_HCI_ENCRYPTION_KEY_SIZE_MIN`.
Add a new Kconfig `BT_BR_MIN_ENC_KEY_SIZE`. It is used to set the
specific minimum encryption key size.
The default value is `BT_SMP_MIN_ENC_KEY_SIZE`. And it can be
configured if `BT_SMP_SC_ONLY` is not enabled.
Use `CONFIG_BT_BR_MIN_ENC_KEY_SIZE` as minimum encryption key size in
`br_sufficient_key_size`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Since the function `bt_sdp_discover` has been updated, the caller of
function needs to be updated to avoid the building and functionality
fault.
Add set the parameter `type` to value
`BT_SDP_DISCOVER_SERVICE_SEARCH_ATTR`.
Update the SDP discovery callback function. Make it align with
`bt_sdp_discover_func_t`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Extend the function `bt_sdp_discover` to support service search
transaction and service attribute transaction.
Improve the `session->rec_buf`. If the net buffer cannot be allocated
from the channel, disconnect the SDP session.
Set the `MaximumAttributeByteCount` of the request
`SDP_SERVICE_SEARCH_ATTR_REQ` with the tail room of `session->rec_buf`.
Set the `MaximumAttributeByteCount` of the request `SDP_SERVICE_ATTR_REQ`
with the tail room of `session->rec_buf`.
Set the `MaximumServiceRecordCount` of the request
`SDP_SERVICE_SEARCH_REQ` according to the tail room of
`session->rec_buf`.
Handle the response code `SDP_SERVICE_SEARCH_RSP`, and
`SDP_SERVICE_ATTR_RSP`.
Handle the error `SDP_ERROR_RSP`. Start the next SDP discovery if the
error received.
If there no more request, disconnect the session.
If the request cannot be sent, start the next SDP discovery.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
It is recommended to record the subunit type itself instead of the
subunit ID when validating the transaction. This approach is more
meaningful and less prone to misinterpretation.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Because the number of ACL RX buffers must be at least the number of
maximum connections plus one, increasing `CONFIG_BT_MAX_CONN` could
inadvertently lead to a build failure if the number of ACL RX buffers is
not also increased. This dependency may not be obvious to users.
To address this issue, this commit deprecates the
`CONFIG_BT_BUF_RX_COUNT` Kconfig symbol and computes the value in
`buf.h` using the new `BT_BUF_RX_COUNT` define. Note that the default
value and the minimum range value have been changed to 0 to "disable"
the option.
Additionally, to allow users to increase the number of ACL RX buffers,
this commit introduces the new `CONFIG_BT_BUF_RX_COUNT_EXTRA` Kconfig
symbol. The value of this symbol will be added to the computed value of
`BT_BUF_RX_COUNT`.
The configurations of tests and samples have been updated to reflect
these changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
when receiving the io cap request from controller, call
pairing_accept to check whether application accept the
pairing. If no, reply BT_HCI_OP_IO_CAPABILITY_NEG_REPLY.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
This patch defines the message format for AVCTP unit message.
This is the first out of the four types of commands and can be
used by the CT to obtain the unit info from the TG device.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Only the basic functions for establishing an AVCTP connection
are provided at this stage.
An BR/EDR ACL connection is necessary before AVRCP function.
Register callbacks before utilizing AVRCP.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch add SDP records for both CT and TG role.
The SDP attribute would be registered according to the configuration.
OBEX and Browsing commands are optional and yet not supported.
SDP registration is implemented at AVRCP level to simplify the
workload of the upper layer. We assume the App can have limited
knowledge on SDP structures.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch implementing avrcp.c
New Kconfig BT_AVRCP is provided to enable this layer.
BT_AVRCP_TARGET and BT_AVRCP_CONTROLLER are then
provided to enable one of the two roles independently.
avrcp.h shows the APIs for the upper layer.
Only connection and disconnection interfaces are provided in this patch.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch implementing avctp.c
New Kconfig BT_AVCTP is provided to enable this layer.
avctp_internal.h shows the APIs for the upper layer, i.e., AVRCP.
Only connection and disconnection interfaces are provided in this patch.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Regardless IO capabilities, clear MITM flag for pairing
initiator if the required security level is less than
BT_SECURITY_L3.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The `ident` of L2CAP BR connection req will be cleared if
function l2cap_br_conn_req_reply called to send L2CAP BR
connection rsp with result `BT_L2CAP_BR_PENDING`.
Then the invalid `ident` (it is zero) will be filled in
the L2CAP BR connection rsp after the ACL connection is
encrypted.
Recover `ident` if the result of the connection rsp is
`BT_L2CAP_BR_PENDING`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Currently, error code `-ENOTSUP` will be
returned if start security with security
level 4.
For SC supported case, level 4 for ssp
should be supported.
Remove the code limitation to support
security level 4.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The flags of L2CAP_CONFIGURATION_REQ are set.
But in L2CAP_CONFIGURATION_RSP, all bits of
flags are cleared.
When used in the L2CAP_CONFIGURATION_RSP
packet, the continuation flag shall be set
to one if the flag is set to one in the
Request.
Copy flags from Request to Response if it
is a successful result.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Currently, Only configuration opt MTU is handled.
For opt `Flush timeout`, `QOS`, `Retransmission
and Flow Control`, and `FCS`, response wilt
result `BT_L2CAP_CONF_UNACCEPT`.
For opt `extended flow specification` and
`extended windows size`, response wilt result
`BT_L2CAP_CONF_REJECT`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The `BT_L2CAP_CONF_SUCCESS` is returned as result for the config
req with supported opt.
Result `BT_L2CAP_CONF_UNKNOWN_OPT` should be returned for this case.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The `bonded` flag of the callback `pairing_complete` is always true,
event if the SSP pairing is non-bondable.
Check the bonding status in SSP complete event instead of in link key
notify event.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
In current, the bondable flag cannot be configured for each specific
BR connection.
But for LE conn, there is a function `bt_conn_set_bondable` for this
purpose.
Improve `bt_conn_set_bondable` to support BR conn.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
If the return value of function bt_get_bondable is false, clear the
bonding flag when controller requiring `Authentication_Requirements`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
