Address issue where the timing source is not stopped upon step completion
and not adjusting the actual position after performing a step.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a fallback for the dual-edge-step property in the step dir common
code. Without this drivers using the common code would have to declare the
dual-edge-step property so it can default to false when not set, even if
the IC does not support adjusting it.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a timing source api which is used by the step-dir stepper common code.
This allows the reusable common code to configure different timing sources,
since the initial delayable work implementation was inacurate for higher
maximum velocities.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Use the shell_device_filter utils method and leverage the new api classing
to only suggest stepper devices via tab-complete within the shell.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
- rename enable-gpios to en-gpios in adi,tmc2209
- place en-gpios in common stepper-controller.yaml
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
create rampstat Kconfig template to enable respective tmc drivers to
reuse the common configurations
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Use shell_device_get_binding() instead of device_get_binding() so that
we get the device based on its name and in addition by its label.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
for the brevity renaming direction_gpios to dir_gpios since STEP/DIR
interface is quite an established term in context of stepper controllers.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
The current implementation of tmc2209 driver does not allow instantiation
of the driver without configuring msx pins.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Adds a step direction binding that can be used with any stepper that
implements said control interface to cut down on boilerplate code.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This commit refactos set_actual_position to set_reference_position.
stepper_set_reference_position is more apt in regards to what this func
actually does
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
This commit fixes incorrect c prototype and defintion of
stepper_set_callback to stepper_set_event_callback
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
This commit fixes minor copyright issues and corrects the compatible of
gpio-stepper with the vendor name as zephyr
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
This commit does the following:
1. tests set_callback and user_data
2. fixes the api as well as the drivers by passing user_data
back to the set callback
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
This commit deprecates passing of async signal in functions such as move
and set_target_position. As per the new API, the async signal has to be
set via set_async_signal.
If RAMPSTAT_POLL is activated then enable_constant_velocity_mode would be
able to raise signals like END_STOP_DETECTED & SENSORLESS_STALL_DETECTED.
This commit also adjusts shell script in order to test these signals.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Fixes:
/__w/zephyr/zephyr/include/zephyr/drivers/stepper.h:429:16: error:
'direction' may be used uninitialized [-Werror=maybe-uninitialized]
found with:
west build -p -b esp32s3_touch_lcd_1_28/esp32s3/appcpu -T
tests/drivers/stepper/shell/drivers.stepper.shell
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add shell commands to enable/disable, move, set velocity, configure
micro-step resolution, and display stepper motor status. Includes an
`info` command to output all relevant data with graceful handling of
unsupported features.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The gen_kobject_list.py script expects the __subystem declaration to end
with _driver_api. Adjust the stepper api and existing driver implementation
accordingly.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
