There's no need to track this info in prov.c since hci_core.c is
already doing it. Just query hci_core.c always using the
bt_pub_key_get() API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If PB-GATT is disabled while there are connected clients, those
clients must be disconnected. Add a 'disconnect` parameter to
bt_mesh_proxy_prov_disable() to handle scenarios when we don't want to
disconnect (e.g. right after successfully finishing provisioning) and
tose where we do want to disconnect (e.g. user requesting to disable
the provisioning bearer).
Also make sure that we always update advertising, so that a stale
advertising set isn't left in the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If both PB-ADV and PB-GATT are supported, we need to properly
re-initialize variables such as link.rx.prev_id and (particularly
importantly) link.rx.buf. If we don't do this it may lead to the
following fault when trying to reprovision again:
***** USAGE FAULT *****
Illegal use of the EPSR
***** Hardware exception *****
Current thread ID = 0x20001f10
Faulting instruction address = 0x0
Fatal fault in thread 0x20001f10! Aborting.
Fixes#14928
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove unnecessary const keywords (the entire struct is const) and use
bool instead of u8_t for the require_link member.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using settings_delete() makes it much easier to understand what the
code is doing, and actually also reduces the amount of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With BT_HOST_CRYPTO, advertising stack size could be overflowed,
increase size to 1024 when BT_HOST_CRYPTO is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The code for clearing model bindings and subscriptions was flawed in
that proper "cleared" entries were never stored in settings. The code
must pass 0 and NULL to settings_save_one() in case the entry is
desired to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was storing a "cleared" entry in storage for every model,
regardless of them having any subscriptions or not. Update hte
mod_sub_list_clear() function to return a "cleared entries" count so
that the calling code can decide whether any action is needed or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant "val (null)" logs and add a few missing BT_DBG()
calls to make the tracing of storage handling easier.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a BT_DBG that will output the value of pub_addr before its ever
set to anything. Remove output of pub_addr from BT_DBG().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This makes use of BT_GATT_CCC_MANAGED so instead of having a custom
attribute which is not managed by stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In certain configurations, such as with MPU support enabled, the
consumption of the advertising thread has gone slightly up. In some
case it was seen to overflow by some 48 bytes. Let it always be 786,
like it was so far with CONFIG_BT_HOST_CRYPTO.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Sending a model publication message could fail e.g. if there are no
buffers available, however this doesn't mean that we should stop doing
periodic publishing indefinitely. When an error occurs, make sure to
call the publish_sent() function so that the periodic publishing timer
gets resubmitted if necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the Friendship & Low Power Node features aren't
available or feasible, however power saving is nevertheless required.
This patch introduces two new APIs to suspend and resume the Mesh
network. Currently, what this impacts is the LE scanning, the
ability to allocate new outgoing buffers, as well as the model
publishing, beacon and heartbeat timers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tracking of the BT_MESH_VALID flag and the PB-GATT state was rather
fragile. Add proper error returns to the various GATT service enable &
disable handlers, and toggle the BT_MESH_VALID flag in a single file
(main.c). Use the newly added error returns to ensure that we don't
re-enable PB-GATT if it wasn't already enabled from before.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's already a flags member in the bt_mesh context, so take
advantage of that for any boolean members that have so far been
bit-fields. This should produce more efficient code, also for the
sequence number that's now its own u32_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The msg->prev_addr is already stored in frnd->clear.frnd, so there's
no need to have an extra stack variable for this (in the form of
prev_addr).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently, when handling a Friend Request message with `prev_addr` set,
we look up existing friend entry using `prev_addr` as the address.
However, `prev_addr` is the address of the requesting node's previous
friend, NOT the address of the requesting node itself. Therefore, we
should always look up existing friend entry using `rx->ctx.addr` as the
address.
Signed-off-by: Jiahao Li <reg@ljh.me>
This fixes usage of an uninitialized variable (to_store) as introduced
by commit bfad2a0.
Fixes#12314
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Both "store" and "clear" are verbs, so putting them after each other
is just confusing. Use "clean" consistently when clearing settings
entries.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When we're acting as a Friend for an LPN, we need to consider all
elements of the LPN. The information of how many elements the LPN has
is provided in the Friend Request message, however until now the code
did not do anything with this information.
Fix the issue by tracking the number of elements for each LPN and
update the unicast address matching code to take this into account.
Fixes#11731
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds Kconfig option to disable HCI ECDH support.
It will compile out ECDH related code, especially HCI event handlers.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Experiments have shown that the probability of missing advertising
packets is significantly lower with 30ms scan window compared to 10ms
scan window. This is especially the case with advertisers using a 20ms
advertising interval, which in turn is perhaps the most common one
since it's the smallest allowed by the Bluetooth 5.0 specification.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes mesh shell to register commands with the new shell subsystem
and stop using the legacy shell.
Fixes#11056
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The current method relies heavily on the linker/compiler to
do the correct operation. Which is to eliminate the code that will
never get called. This posses a problem if the build even changes
by a smallest fraction.
The current patch will enforce proper inclusion of the code at the
pre-processing stage. Thereby not relying on the compiler/linker to
do the right thing.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are some cases where atomic_and/or don't need to be
checked. Actively acknowledge these cases.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The test for IS_ENABLED(BT_SETTINGS) in mod_reset()
should be IS_ENABLED(CONFIG_BT_SETTINGS).
Signed-off-by: David Leach <david.leach@nxp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ordering of items in flash is not guaranteed, so it's possible we
get an App Key before the corresponding Net Key. Remove the check for
a Net Key, since the storing code should never store an App Key if
there is no corresponding Net Key.
Fixes#9670
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
PTS version 7.3.0 incorporates some errata which change the expected
behavior of the heartbeat subscription state. Update the code so that
the following tests pass successfully:
MESH/NODE/CFG/HBS/BV-01
MESH/NODE/CFG/HBS/BV-02
MESH/NODE/CFG/HBS/BV-03
MESH/NODE/CFG/HBS/BV-04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
