In order to accept string of the same size entered in
CONFIG_BT_DEVICE_NAME_MAX an extra byte must be allocated to guarantee
it will always be NULL terminated.
Fixes#15067
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no need to track this info in prov.c since hci_core.c is
already doing it. Just query hci_core.c always using the
bt_pub_key_get() API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If PB-GATT is disabled while there are connected clients, those
clients must be disconnected. Add a 'disconnect` parameter to
bt_mesh_proxy_prov_disable() to handle scenarios when we don't want to
disconnect (e.g. right after successfully finishing provisioning) and
tose where we do want to disconnect (e.g. user requesting to disable
the provisioning bearer).
Also make sure that we always update advertising, so that a stale
advertising set isn't left in the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If both PB-ADV and PB-GATT are supported, we need to properly
re-initialize variables such as link.rx.prev_id and (particularly
importantly) link.rx.buf. If we don't do this it may lead to the
following fault when trying to reprovision again:
***** USAGE FAULT *****
Illegal use of the EPSR
***** Hardware exception *****
Current thread ID = 0x20001f10
Faulting instruction address = 0x0
Fatal fault in thread 0x20001f10! Aborting.
Fixes#14928
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove unnecessary const keywords (the entire struct is const) and use
bool instead of u8_t for the require_link member.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using settings_delete() makes it much easier to understand what the
code is doing, and actually also reduces the amount of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add error checking, remove redundant code, and improve the logging for
settings related functionality.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The read() callback of attributes returns ssize_t and not size_t. Fix
this, which also fixes a Coverity warning.
Fixes Coverity CID 197457
Fixes#14958
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention in the code is to use the appropriate address copying
functions instead of direct assignments. Even when a specific copying
function doesn't exist the convention is to use memcpy.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Fixes#14044
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Updating the Resolvable Private Address when advertising and
active scanning in progress fails and clears the RPA_VALID
flag; making the next bt_le_scan_start while continuing to
advertise to fail.
This is fixed by keeping the RPA_VALID flag remain set.
Stopping and starting active scanning to update RPA can be
implemented in a separate commit.
Fixes#9463.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When building ticker.c from the shell, it requires include access to the
Nordic HAL, so add the relevant folder to the include path.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With BT_HOST_CRYPTO, advertising stack size could be overflowed,
increase size to 1024 when BT_HOST_CRYPTO is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Command scan fixed in the way that it can take one mandatory parameter
and one optional. Previously it accepted only 2 mandatory parameters.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed automatic argument count checking in bt command. Now
it is possible to print a message that extra argument is not
recognized.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Several public APIs were not checking the BT_DEV_READY flag, which
could lead to hard-to-debug behavior, particularly when the stack
lacks an identity address. Add the appropriate checks to these APIs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The treatment of the BT_DEV_READY flag was broken when used together
with BT_SETTINGS. The flag would get set even though the stack was
still in a partially initialized state. Even worse, for central role
the stack would potentially try to initiate passive scanning without
having an identity address.
Refactor the code that sets the BT_DEV_READY flag (among other
initialization) into a separate bt_finalize_init() helper function and
call it when the settings have been loaded. Also clarify the warning
message given to the user in case settings_load() needs to be called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix a bug where the controller would use the length
field of the advertisement packet before checking
if the length field was valid.
It is possible that the controller has received a packet
that passes CRC check but has a length field that is invalid.
This would cause the scanner to overwrite the scan report
buffer
Fixes: #14741
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The code for clearing model bindings and subscriptions was flawed in
that proper "cleared" entries were never stored in settings. The code
must pass 0 and NULL to settings_save_one() in case the entry is
desired to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was storing a "cleared" entry in storage for every model,
regardless of them having any subscriptions or not. Update hte
mod_sub_list_clear() function to return a "cleared entries" count so
that the calling code can decide whether any action is needed or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant "val (null)" logs and add a few missing BT_DBG()
calls to make the tracing of storage handling easier.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The le_conn_param_req() function was missing a return statement in
case of a failed connection lookup. This could lead to replying to the
connection parameter request twice as well as passing NULL to
bt_conn_unref(). The latter issue also triggered a Coverity warning.
Fixes CID 196638
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_WARN() should only be used for log messages that may indicate a
problem. However, the controller HCI code was using it for messages
that were of a pure debugging/informational nature. Convert these to
BT_DBG() instead - this should hopefully also help avoid unnecessary
user questions of seemingly alarming log messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The 2M and Coded PHY bit should not be set when the
PHY update procedure is not supported.
Fixes#14658
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Peer side will disconnect if controller initiates
Encryption procedure before PHY update procedure
has finished.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in LL encryption procedure, controller was
using the wrong pointer to connection state.
Function event_enc_prep is called from
slave_event_prepare, where _radio.curr_conn has not
been assigned yet.
The connection ended up sending LL_START_ENC_RSP
unencrypted, resulting in disconnect on the peer
side with reason MIC failure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix implementation to correctly return the configured
default Tx Power Level.
Also, fix the missing use of RADIO_TXP_DEFAULT in the new
ULL/LLL implementation of Advertiser and Observer states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation in controller to use range delay
alongwith the active clock accuracy jitter.
Range has been hard coded to 1000 meters, suffices
modules out in the market.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to regression the option to enable PHY Update Procedure
on proprietary 2M PHY for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround from asserting when Rx PDU buffers from pool
needing resize is acquired by another connection. By
skipping the connection events to give some headroom for
the host to process the Rx packets and eventually make the
pool available for resize.
Fixes#11841.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There's a BT_DBG that will output the value of pub_addr before its ever
set to anything. Remove output of pub_addr from BT_DBG().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds BT_GATT_DISCOVER_ATTRIBUTE which can be used to discover any
type of attribute in a given range.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Those are not considered Descriptors and shall be discovered with
use of BT_GATT_DISCOVER_CHARACTERISTIC.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When discovering descriptor Find Information procedure is used which
does not allow any filtering by the server so it will return all
attributes in the given range including services and characteristics.
Fixes#14265
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use reverse order for bitfields on big-endian architectures. Treat
all PDU data as little-endian and add conversions as needed. Treat
access address as 4-byte value instead of u32_t to avoid flipping
endianness.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
By specifying the controller directly when selecting the default
BT_HCI_TX_STACK_SIZE, an external controller may rely on the final
default value when none of the in-tree controllers are used.
The value is increased to 1024 to accomodate the current worst-case
stack size.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
This moves the vendor-specific HCI command/event configuration
definitions out of bluetooth/common into bluetooth. This allows
the controller itself to indicate its support for vendor-specific
commands/events.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
subsys/bluetooth/common/Kconfig and subsys/bluetooth/host/Kconfig are
'source'd within 'if BT' and 'if BT_HCI', in subsys/bluetooth/Kconfig,
so there's no need to add those dependencies within them.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Check the return value of mayfly_enqueue() and assert if not successful.
Coverity ID: CID 190991
Fixes#13833.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Inside ll_test_end(), result of lll_clk_off() is not checked
which might result in releasing resources acquired for radio.
Coverity-CID: 190954
Fixes: #13861
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
