Clarify what iPerf version was used when testing this sample
application. It was iPerf 2.0.9 which worked ok, for example
iPerf 2.0.13 did not work properly with UDP uploader (client)
mode.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to construct a proper iperf client header to the payload
as the server expects that. It is not sure if this is needed
or correct as there is no proper documentation for the iPerf2
protocol.
Fixes#14665
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to construct a proper iperf client header to the payload
as the server expects that. It is not sure if this is proper
way to do the iperf header as there is no documentation about
iPerf protocol anyway (except the iPerf source code).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
`CONFIG_NET_L2_BT` no longer forces required BT configuration, but
depends on a user to set a valid configuration instead. Hence, we
need to select a proper configuration in the overlay config file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the buffer directly.
Let's reuse already parsed ip/proto headers as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As there is no shell submodules any more, the "zperf" command
needs to be written in every command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use the state machine states to determine if the session has ended.
This way zperf will properly reply stat packet to remote client even if
duration of the session is non zero.
Also we don't need to update counter (received packet number) at end of
the session.
Note: if id < 0, it means session end, otherwise it's session ongoing.
(id is the first feild of application data from remote client).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Considering that IP can be set dynamically by DHCP
or statically before test previously, we could have
alternative way by supporting both setting IP and
existing IP.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Rephrase some help messages to decrease flash usage.
Deactivate shell history feature for test test_netusb_rndis
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
We are not expecting forever k_sleep in multithreading.
And k_sleep is empty in non-multihreading.
So remove invalid forever sleep to avoid the below issue.
ASSERTION FAIL [duration != (-1)] @ zephyr/kernel/sched.c:807
Please refer to _impl_k_sleep api in zephyr/kernel/sched.c:807
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
context4/6 is initilalized in net_context_get function
which is restricted under CONFIG_NET_IPV4/IPV6 with
IS_EANBLED macro. So add the same macro check for
net_context_put function to avoid NET_ASSERT(context).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
If NET_IPV6 is disabled, build issue happens as below.
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c: In function ‘zperf_tcp_rx_thread’:
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:171:9: error: ‘in6_addr_my’ undeclared (first use in this function)
&in6_addr_my->sin6_addr);
^~~~~~~~~~~
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:171:9: note: each undeclared identifier is reported only once for each function it appears in
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c: In function ‘zperf_tcp_receiver_init’:
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:250:3: error: ‘in6_addr_my’ undeclared (first use in this function)
in6_addr_my = zperf_get_sin6();
^~~~~~~~~~~
*** [CMakeFiles/app.dir/src/zperf_tcp_receiver.c.obj] error 1
*** [CMakeFiles/app.dir/all] error 2
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
The task_profiler is not needed nor used by zperf so remove
it from CMakefile.
Fixes#11051
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
The "zperf udp download" optional port parameter was not properly
checked, the default port check branch was never reached.
Fix also the same issue in tcp download command.
Coverity-CID: 188881
Fixes#10758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use new shell instead of the legacy one. This commit also fixes
the configuration file mess and allows the program to be run on
more hardware.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Decrease number of buffer for sanity check, in real sample logs
consuming a lot of memory might be traded for buffers. The sample was
failing for quark_se_c1000_devboard.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The support for Galileo board is bitrotted as the config file
contains obsolete values. As testing this old board is difficult
lets remove the config files. These can be re-introduced with
proper and tested settings if needed.
Fixes#7814
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_DEBUG_IP_BUFS was commented out but specified in galileo
specific conf files. The Kconfig symbol doesn't exist so lets remove
it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
