A fairly common idiom in our test code is to put test-local data
structures onto the stack, even when they are to be used from another
thread. But stacks are incoherent memory on some platforms, which
means that such things may not get a consistent view of memory between
threads.
Just make these things static. A few of these spots were causing test
failures on intel_adsp_cavs15. More were found by inspection while
hunting for mistakes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
tls rely on both arch has tls and toolchain support tls, add filter:
CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE for
some tests enabled tls.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
build_on_all here was supposed to be a smoke test to test building on
all platforms, it should not be used for more than 1 just test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The BIT_INDEX() macro assumed little-endian. This commit adds
big-endian support, conditioned on the preprocessor define
CONFIG_BIG_ENDIAN.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Using the same implementation as the rest of Zephyr reduces code size.
Update options and expected results for formatting test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These tests were suppressed when KERNEL_COHERENCE=y because of a
feature collision with CONFIG_POLL that has since been fixed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing testcase's doxygen describes are the general
implementation idea of a function.On this basis, adding
more descriptive statements to describe which conditions need
to be preset when running the testcase, which test techniques
are applied, and describe the testcase Design steps in detail.
Make it more readable.
Signed-off-by: Ying ming <mingx.ying@intel.com>
The k_poll implementation places a struct _poller on the stack and
shares it with other threads, which is incompatible with the
KERNEL_COHERENCE model of cached stacks.
Make this a hard build failure instead of a kconfig dependency for
clarity. The failures if a user actually enables both are subtle and
difficult to debug.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Reduce the error between the timer (which is tick-aligned) and
busy_wait (which is not) by aligning the busy_wait to start at
a tick boundary.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The width for %p on 32-bit targets should be 8 regardless of
CONFIG_PRINTK64. Adjust the test accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
After the Qemu Cortex-M0 timer driver rework, we may
re-enable the test-cases that had been skipped for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for 64 bit conversions in a uniformly expressable way by
printing values backwards into a buffer on the stack first. This
allows all operations to work on the low bits of the value and so the
code doesn't need to care (beyond the size of that buffer) about the
word size. This trick also doesn't care about the specifics of the
base value, so in the process this unifies the decimal and hex printk
conversion code to a single function.
This comes at a mild cost in CPU cycles to the decimal converter and
somewhat higher cost to hex (because it's now doing a full div/mod
operation instead of shifting and masking). And stack usage has grown
by a few words to hold the temporary. But the benefits in code size
are substantial (e.g. ~250 bytes of .text on arm32).
Note that this also contains a change to tests/kernel/common to
address what appears to have been a bug in the original converters.
The printk test uses a format string that looks like "%-4x%-2p" and
feeds it the literal arguments "0xABCDEF" and "(char *)42".
Now... clearly both those results are going to overflow the 4 and
2-byte field sizes, so there shouldn't be any whitespace between these
fields. But the test was written to expect two spaces, inexplicably
(yes, I checked: POSIX-compatible printf implementations don't have
those spaces either).
The new code is definitely doing the right thing, so fix the test
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
add new test cases to illustrate the zephyr OS
support an array of atomic variables, each bit
of which can be modified.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Test fails on this one platform, to unblock other changes, skip the test
while the issues is being looked at. This test never ran on this
platform before due to ram restrictions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename boot_delay function name for clarity and change doxygen group to
be more generic and part of the init group.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove all ram restrictions in kernel tests and revisit all tests and
try to make them pass on all platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This test works by starting a bunch of poll events, dropping the test
thread priority, calling k_poll(), and assuming that all the timeouts
that fired woke up high priority threads and thus ran before k_poll()
could return. But that isn't true if you have another CPU that can
run the low priority thread while the last high priority thread
finishes up!
This just isn't SMP-correct. Mark 1cpu.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The documentation motivates this function by saying it is more
efficient than the core 64-bit version. This was untrue when
originally added, and is untrue now. Mark the function deprecated and
replace its sole in-tree use with the trivial equivalent.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
To catch more potential issues with PRs, build common kernel tests
in addition to the synchronization sample which does not run any tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Suppress integer overflow warning generated by the check macros
NEG_CHECK and ROLLOVER_CHECK in intmath tests
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
