Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When handling CoAP Confirmable requests, there is a common
Acknowledgement initialization procedure that repeats for each
response packet initialization. This patch adds a function that
simplifies Acknowledgement initialization procedure encapsulating
repeating code.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP RFC (RFC7252) states that end points should support
the CoRE Link Format of discoverable resources as described in RFC6690
(refer section 7.2 of the RFC7252).
Fixes#31609
Signed-off-by: Kasun Hewage <kasun.ch@gmail.com>
Only start the network logging backend if the autostarting
option CONFIG_LOG_BACKEND_NET_AUTOSTART is enabled.
Also, call init to make sure that the backend is initialized
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Token and payload are appended from data buffers to a CoAP packet
being encoded. Keyword const was missing for parameters in functions
appending these parts to a packet.
Now token and paylod can be copied to CoAP packet from constant
buffers, that can be stored in ROM.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Add Kconfig option to randomize the initial ACK timeout, as specified in
RFC 7252. The option is enabled by default.
Additionally, finetune the default value of COAP_INIT_ACK_TIMEOUT_MS
option, to match the default ACK_TIMEOUT value specified by the RFC
7252. The RFC does not specify the minimum/maximum value of the
ACK_TIMEOUT parameter, but only suggests it should be no lower than 1
second, so adjust the option range to reflect this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Multi-instance resources shall report its dimension (number of
resource instances) on discovery. Since it was not possible to tell
simply on the instance count whether the resource is multi-instance or
not (there could be a multi-instance resource with only one instance
avaialble) add a new parameter to the structure representing resource,
indicating whether it's multi-instance or not.
Add dimension information to the discovery result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove any references of Bootstrap Discovery from Device Management
Discovery procedure and fix some of it's logic following the
specification.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bootstrap discovery was not implemented properly in the LwM2M engine.
Although, there were some indications in the source code that it is
implemented, it was not done according to spec (and actually broken).
Given that Bootstrap Discovery procedure differs a lot from the regular
Device Management Discovery (different permissions, different
information returned), it's easier to implement it as a separate
function (`bootstrap_discovery()`) instead of making the existing
`do_discovery_op()` function even more complicated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit improves portability somewhat on machines where sizeof
(int) is less than sizeof (void *). Note that the implementation is
still not portable and will fail when you start using addresses which
can not be represented by "int cast to unsigned int".
On RISC-V 64-bit with RAM on 0x80000000 we previously got hit by
E: Exception cause Load access fault (5)
ld s0,16(a0)
a0: 0xffffffff80025610
(The int should probably be changed to intptr_t if possible.)
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
`delta_size` was incorrectly used to assess whether extended option
length field shall be used. In result, options larger than 268 bytes
were not encoded properly.
Fixes#31206
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The LwM2M firmware pull object no longer uses the system workqueue
to execute firmware_transfer(), but directly executes it itself.
Previously, the workqueue would be blocked because firmware_transfer()
indirectly calls a blocking connect(). This would lead to problems
with e.g. modem drivers that use UART to interface with the modem
hardware, as some UART drivers use the workqueue.
Fixes#31053.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
It is documented that using transient information like whether a work
item is pending or a delayed work item has time left to determine the
state of the work item before subsequent reconfiguration is prone to
race conditions, and known to produce unexpected behavior in the
presence of preemptive threads, SMP, or use of the work item from
interrupts. As a best practice such pre-validation steps should be
avoided unless algorithmically necessary.
All comparisons of remaining delayed time before canceling a delayed
work item in this module appear to be optimizations subject to the
above race conditions. Remove the checks so that only the inherent
race conditions in the implementation of canceling a work item remain.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
With this patch the resolver module can resolve literal IPv6
and IPv4 addresses even when DNS client is not presnet in
the system.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
During recent upmerge OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION__COUNT_ARGS
macro was renamed to OPENTHREAD_CONFIG_PLAT_LOG_MACRO_NAME__COUNT_ARGS
but the code wasn't updated where the macro is actually used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If getaddrinfo() was called with AI_PASSIVE flag in hints,
returned address defaulted to SOCK_STREAM and IPPROTO_TCP.
Fixed so that SOCK_DGRAM leads to correct address type
that can be fed to bind() directly.
Same hard coding was visible when numerical IPv4 address string
was converted to binary. That is also fixed to respect hints now.
Also, added functionality to get IPv6 address, when hints contained
AF_INET6.
Fixes#30686
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Add option to enable software CSMA backoff in the OpenThread MAC layer.
This allows to run CSMA procedure correctly in radios that do not
support hardware CSMA backoff, and use them as RCP, where this feature
is required.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a missing otPlatSettingsDeinit function
to the Zephyr OpenThread platform implementation.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Previously, lwm2m_engine set would check against the max_data_len
parameter of the ressource, but didn't take into consideration the
(possibly changed) max_data_len returned by the pre_write callback.
Fixes#30541
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
In mqtt_keepalive_time_left(), return -1 if keep alive messages are
disabled by setting CONFIG_MQTT_KEEPALIVE=0.
This allows to use mqtt_keepalive_time_left() directly as an input
for poll(). If no keep-alive is expected, -1 would indicate
that poll() can block until new data is available on the socket.
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
The message should only be returned if the requested pending/reply
pointer is not NULL. Otherwise it could get an incorrect match (for
instance if specific pending pointer is searched for and reply is NULL
the function could return any message that doesn't expect a reply (and
thus has its reply pointer set to NULL).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine by default sends piggybacked responses for requests after
all callbacks are executed. This approach however isn't good enough if
the application callback executes some lenghty operations (for instance
during FW update). Delaying the ACK may result in unnecessary
retransmissions.
This commits adds an API function which allows to send an early empty
ACK from the application callback. This prevents further retransmissions
from the server side. After all callbacks are executed, the LwM2M engine
will send the response as a separate CON message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify if block tranfer is used and not an initial block when skipping
directly to data processing during FW update in PUSH mode.
This fixes a bug, which caused TLV not to be processed when the FW
object was updated as a whole, and actual resource number was encoded in
a TLV (for instance when writing FW Update URI).
Fixes#30135
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework the bootstrap DELETE operation, to support deletion of multiple
resources.
Current implementation had several oversimplifications, making it not
spec-compliant:
* DELETE `/` removed only Security object instances (!= 0)
* DELETE `/x` was handled as DELETE `/x/0`, therefore not removing all
of the object instances.
Since the above is only supported during bootstrap and not regular
Device management, this functionality was implemented in the
`bootstrap_delete` function, which now will be called for all DELETE
operations initiated during bootstrap. The regular LwM2M DELETE handler
will only be called during regular Device management, as it has more
strict limitations on what can be deleted.
Additionally, handle empty URI Path option as `/`, therefore indicating
deletion of all resources.
Fixes#29964
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because unoconnected stream socket doesn't have any chance to receive
any data, so a blocking recv() would hang forever on it (and does
without this change).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds support for DNS Service Discovery (DNS-SD)
as described in RFC 6763.
Fixes#29099
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the boostrap regstration procedure, by splitting the message
creation and sending into a separate function, in similar manner as
it's done with regular registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, when socket errors occur during receive, the LwM2M engine
restarts the state machine and registers again to the server. While this
works in simple use case (only RD client socket open), it's not a valid
approach when more sockets are open (FW update socket).
Fix this by introducing socket fault callback, which is registered by
the LwM2M engine users. This way, a proper socket owner is notified on
error and can pertake appropriate action.
For RD socket errors the behaviour remains the same - the state machine
is reset and the client registers again to the server. For FW update
socket, handle the error by reopening the socket and retransmitting the
last request. This allows to resume the download from the point the
error occured, w/o a need to start from scratch.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Call mbedtls_ssl_conf_max_frag_len() on created TLS context
configuration, so that Maximum Fragment Length (MFL) will be sent to
peer using RFC 6066 max_fragment_length extension. MFL value is
automatically chosen based on MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN mbed TLS macros.
This extension is mostly useful for TLS client side to tell TLS server
what is the maximum supported receive record length.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If there are enough tls_context objects in the system (configured by
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS), but there are not enough file
descriptors (configured by CONFIG_POSIX_MAX_FDS) to create underneath
TCP/UDP socket, then TLS socket creation fails with leaked tls_context.
Call tls_release() in ztls_socket() error path whenever underneath
TCP/UDP socket creation fails.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
According to LwM2M specfication v1.0.2, par. 5.3.2, the LwM2M client
MUST send an “Update” operation to the LwM2M Server whenever the
lifetime parameter of the Server object changes the server). The same
applies for the object instances created/deleted. The changes in objects
seem to already be handled, but the lifetime was not.
Additionally, the "Update" message shall only contain these parameters
which changed since the last update (including objects). As it's
straightforward to determine if the liftime changed but it's not easy
to tell if there were updates in the object instances, add an
additional parameter to the engine_trigger_update() function, indicating
that new object information shall be sent in the "Update" message.
Eventually add a proper error checking in `sm_send_registration` as the
function is reworked anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The memset on firmware_ctx during PULL FW update initialization will
set the socket descriptor to a valid value of 0. This leads to an error
if parsing of the URI provided by the server fails, and the firware_ctx
is closed - the socket with a descriptor 0 will be accidently closed.
Fix this by invalidating the socket FD after the memset on
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
