Add status only pairing failed callbacks (complete and failed) so that
these handlers can be added without providing the ability for MITM
pairing procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix gatt write command returned "write in progress" when either
hex2bin or bt_gatt_write returned an error.
The write_params.func should not be set if the write command was not
successful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix misleading message in the bluetooth shell when the id-create
command returns en error code. In this case both failure and success
messages are printed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add options to control the behavior of the init command.
Option no-settings-load allows the user to create identities
with the id-create command after bt_enable() but before settings_load().
Option no-ready-cb allows the user to test using synchronous enable,
since this sometimes leads to different behavior of the stack.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
ad_len parameter is not length of complete advertising data, but number
of bt_data structs passed to bt_le_per_adv_set_data - we pass only one.
Also memset target buffer before converting hex string so data shorter
than specified will be right-padded with zeroes instead of some
leftovers.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
`iso send` may take an optional "count" parameter but the
number of optional arguments was incorrect.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The PA sync callbacks would have been registered for each new
PA sync, which would cause the callbacks to be called multiple times
if multiple PA syncs were created.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix ifdef in command inclusion, in practice this meant that
CONFIG_BT_LL_SW_SPLIT and CONFIG_BT_CTLR_ADV_EXT switched meaning.
Added blank lines so that the commands in shell/ll.c are more
easily visible as group.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This makes it possible to pass different byte arrays to gatt write
making it usable to test attributes that take more than a single byte.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix shell build errors when building with combined host and controller
but the selected controller is not the in-tree zephyr controller, i.e
CONFIG_BT_CTLR=y, CONFIG_BT_LL_SW_SPLIT=n and cmd_scanx and others
are not defined.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Minor print format update, updated format for Periodic
Advertising Interval, and added SID to be printed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix conditional compilation to allow building test shell
with Periodic Advertising Sync alone.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The sync create and sync delete dit not have the correct
amount of mandatory and optional parameters set in the
SHELL_CMD_ARG declarations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sync terminate callback did not set any entries in the
PA sync array to NULL, thus not allowing the shell to
reuse them in case that the sync was lost unexpectectly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds iso shell module which we can be used to exercise ISO related
APIs:
iso - Bluetooth ISO shell commands
Subcommands:
bind :[dir] [interval] [packing] [framing] [latency] [sdu]
[phy] [rtn]
connect :Connect ISO Channel
listen :[security level]
send :Send to ISO Channel
disconnect :Disconnect ISO Channel
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the command add-subscription to the shell to test the
bt_gatt_add_subscription API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix conditional compilations that fail when combinations
of Broadcaster, Observer, Peripheral and/or Central are
selected to build an application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Removed the check for selected_per_adv_sync as it was unused by the
create/delete functions (which take the index as parameters), and
caused the shell not to print any values.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The `free_per_adv_sync` pointer in `cmd_per_adv_sync_create`
did not work as intended, as it didn't actually update the
pointer in the array, which caused the
`cmd_per_adv_sync_delete` to not function as intended.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added the ext adv report interval to bt_le_scan_recv_info which
denotes whether or not there is periodic advertisement data
associated with the advertisement report.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Remove cmd_ull_reset command, as this would put the host out
of sync. Also, this command is seldom used/required.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Add advertising option for undirected one-time advertising, and
directed advertising using identity, and peer direct is RPA option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The hci-cmd currently accepts only a 1 byte parameter. This
disables use of commands that requires more than 1 byte,
for ex. the feature exchange that requires a 16 bit parameter.
This commit allows a datafield parameter up to 65 bytes long.
65 bytes comes from the nr. of parameters for the
HCI_LE_Generate_DHKey command
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Updated the shell commands related to Advertising Extensions
to call the LE Set Extended Advertising Data command
functional interface for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
