Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes problem where UART DFU mage uploads via mcumgr get interrupted
by the mcuboot_util logs, causing uploads stuck and fail on time-out.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The commit adds initialization of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We cannot automatically flash both master and remote images
to nRF5340 application and network core, this needs to be
done separately. We therefore, cannot execute the test on
nRF5340, so we switch to make the test build-only on this
platform. We also make nrf5340_cpuapp an integration
platform for the given sample.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Start using DTS values for PCI Vendor ID and PCI BDF. For the PCI
Device ID we do not use DTS since this would require changing overlay
for different SKU board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Exlude native_posix platform from USB samples but
add build-only test case.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mcumgr-cli application doesn't accept log on the communication
channel. Since #30370 was merged log messages are generated from
MCUBOOT_UTIL by default. That made `mcumgr image upload` failing.
Patch disables logging via shell which cure the issue.
It is not necessary if another application on the host intercepts
log messages (like picocom can).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Mass-erase the flash prior to running the sample to ensure the storage
partition can be initialized correctly.
Fixes: #30477
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add EDAC shell application demonstrating EDAC API usage. Can be used
for verification of the functionality with error injection mechanism.
Sample is also included in the twister tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Mark the CANopen sample with program download support as build-only
since it depends on MCUboot being flashed to the board prior to the
generated application firmware image.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adds multicore support for lpcxpresso55s69 board.
Documentation to be updated in a later commit.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Commit https://github.com/zephyrproject-rtos/zephyr/commit/0a018db0f
increases worqueue stack size for overlay-fs.conf
exclusively.
overlay-bt.conf also need to be updated as enables mcumgr FS
command set as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Extend the nrf52840dk_nrf52840 sample overlay with a fstab entry for a
littlefs file system on the storage partition.
This eliminates the need for application configuration of the file
system parameters and mount data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit replaces the 'select SHELL' statement with
'depends on SHELL' in OPENTHREAD_SHELL config option.
This ensures, that shell will not be implicitly enabled
when OpenThread stack is built.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Update documentation using west enhancements and add sections related to
newer overlays.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add OpenThread overlays. This allows users to evaluate UpdateHub using
Thread Network.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add Bluetooth Low Energy IPSP overlays. This allows users to evaluate
UpdateHub using BLE with IPSP supported by Zephyr.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add IEEE 802.15.4 overlays. This allows users to evaluate UpdateHub
using 6lowPAN.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add MODEM and Arduino header overlays. This allows users to evaluate
UpdateHub using any MODEM supported by Zephyr which supports UDP and
PPP connection.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add WIFI overlay and connection request. This allows users to evaluate
UpdateHub using any WIFI supported by Zephyr which supports UDP.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support to Network Management in UpdateHub sample. This allows
start application based on network events, independent of the media
type selected by users.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Remove NET_CONFIG_SETTINGS Kconfig option. The net settings should
be enabled from now at project config or at any overlay. This is
necessary to allow better control when application should start.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
USB MSC sample has been expanded over time. Config overlays
for RAM disk and flash disks were added. Board specific overlays
followed. It was overlooked that they forced a specific
configuration for the nrf52840dk_nrf52840 board,
even if it was not explicitly desired
(for example RAM-disk). This also caused strange behaviour
during automatic MSC USB3CV tests (which explicit selects RAM-disk)
so that nrf5340dk_nrf5340_cpuapp board passed test
but nrf52840dk_nrf52840 failed.
Rework disk and file system configuration, and initialization
code, allow to use FAT file system on top of RAM disk.
This sample can be built with none or one of two supported
file systems, LittleFS or FATFS. Disk subsystem can be flash
or RAM based. LittleFS only works with flash disk.
There are four useful possibilities:
- RAM disk without any file system for testing (default)
- RAM disk with FAT file system
- flash disk with FAT file system
- flash disk with LittleFS
Flash disk configurations is only available (as before) for
nordic,qspi-nor compatible, but only need the device tree overlay
per platform without a config overlay.
This path also revises test cases.
Remove invalid "flash" tag from depends_on key.
Remove unnecessary gpio tag and exclude native platform.
Resolves: #26275
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Deactivate all features that are not absolutely needed to run
the shell.
Used CONFIG_CBPRINTF_NANO library to save 1020B.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Configurations for additional smp_svr sanity builds have been added
to limit possibility of getting not compilable smp_svr sample.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Extends the Segger SystemView configuration for the tracing sample to
more platforms that support Segger RTT, not just nrf52840dk_nrf52840.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extracts the Segger SystemView configuration for the tracing sample from
sample.yaml into a separate file. Increases the idle thread stack size
to fix overflows observed on i.MX RT boards. Removes
CONFIG_USE_SEGGER_RTT=y which is selected by CONFIG_SEGGER_SYSTEMVIEW.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
