This commit verifies if the mac configuration is done correctly
during liteeth setup, and prompts a warning when not.
Signed-off-by: Pawel Sagan <psagan@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This commit eliminates an inifite waiting for the TX ready flag
in the eth liteeth driver, exiting with error after a defined
number of attempts.
Signed-off-by: Pawel Sagan <psagan@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This patch adds support for Microchip's KSZ8794 DSA device, which for
switch and PHY control uses SPI communication.
This driver also provides support for handling tail tagging added and
decoded in the KSZ8794 device as well as modifying entries in the
static MAC address table.
It is also possible to use GPIO pin to reset KSZ8794 switch.
When the "reset-gpios" property is not defined, software based reset
is performed instead.
The KSZ8794 can now be used on boards which have SPI CS only available
as GPIO pin.
Signed-off-by: Stefan Bigler <stefan.bigler@securiton.ch>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After the change SHA1: 3498d43784 the
local-mac-address property is no longer parsed correctly when it is
defined in the '&enet` DTS node on k6x SoCs (e.g. frdm_k64f and
ip_k66f).
The problem is with value to which the
NODE_HAS_VALID_MAC_ADDR(DT_DRV_INST(n)) macro is resolved.
If the 'local-mac-address' is present it returns
'(!((0 == 0) && (0 == 0) && (18 == 0) && (19 == 0) && (0 == 0) && \
(16 == 0)))' [*], otherwise it is 0.
As COND_CODE_{01} only accepts 0 or 1 as its first argument, it all
worked until the 'local-mac-address' was not defined. When present
the first argument to COND_CODE_{01} macro was [*] and it caused
build break.
Fixes issue: #30354https://github.com/zephyrproject-rtos/zephyr/issues/30354
Signed-off-by: Lukasz Majewski <lukma@denx.de>
After the commit SHA1: 370d02743a the
alias for 'eth' was removed. As a result DT_ALIAS(eth) for the mcux
enet driver was not providing a valid DTS node reference.
As a result the 'fixed-link' child node property was not recognized at
all.
The 'enet' is a valid DTS label for mcux enet driver, so lets use it
instead.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
currently pcie_get_mbar only returns the physical address.
This changes the function to return the size of the mbar and
the flags (IO Bar vs MEM BAR).
Signed-off-by: Maximilian Bachmann <m.bachmann@acontis.com>
When setting the MAC address, the ethernet driver has to call
net_if_set_link_addr() with the updated address. This was missing and is
added now.
See e.g.
https://github.com/zephyrproject-rtos/zephyr/pull/28874
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Reworks the mcux ethernet driver to use DT_INST_FOREACH_STATUS_OKAY and
eliminate a lot of duplicate code between instance 0 and instance 1.
Renames the ERR_MISC interrupt to ERR due to an issue with the
underscore in the device tree preprocessor macros.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for configuring Ethernet pins using DT pinctrl entries. Note
that F1 series pinctrl support is not handled as the driver does not
support F1.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
1. Merged the single/multiple ring(s) APIs, now these APIs
can handle both which requires passing a ring id.
2. Updated timestamp handling to match the new timestamp
implementation in the SDK driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
With STM32Cube updates
https://github.com/zephyrproject-rtos/hal_stm32/pull/75
'..._hal_rcc.c' and '..._hal_rcc_ex.c' are now systematically
compiled, due to more and more dependencies from HAL IP on rcc.
So USE_STM32_HAL_RCC and USE_STM32_HAL_RCC_EX becomes useless.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
z_tick_get returns signed int. Adapt comparision
statement for remaining time computation.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
If neither a random address nor a specific local address is in the
device tree, then use the MAC address from the device information page.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
Do not override OUI of the local MAC address in the devicetree.
Simplify the mac address assignment conditions. Each interface has
its own function. Code duplication will be eliminated with the
use of DT_INST_FOREACH_STATUS_OKAY in a later commit to completely
remove duplicated code.
The 3 possible MAC address assignment (local, random and unique)
are covered and have been tested.
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This fixes wrong value for i.MX RT.
This is one less hard-coded value in eth_N_context structures.
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This allows setting the MAC address at run time.
Signed-off-by: Antoine Zen-Ruffinen <antoine@riedonetworks.com>
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Initialize device pointer in driver's context.
It was not done quite right in commit a1708cf2f2
("drivers: ethernet: Fix device instance const qualifier loss"),
and then completely removed in commit 113d9274ea
("drivers: ethernet: remove stray expression")'
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The correct return value is -ENOBUFS if we run out of network
buffers when sending the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An unnecessary expression that doesn't compile was inadvertently
introduced in the device constification PR. Remove it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reduced the size of tx_buffer_def array to 1 to save
on function stack memory. Here only 1 buffer is
enough to call the transmit function.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Modify the ethernet driver to use TX complete interrupts.
Adds HAL ethernet TX complete callback and locking semaphore.
Due to changing behavior/content of the TX DMA descriptors
on STM32H7 series, based on the state of the IP,
it is more reliable to wait for the TX complete interrupt to check
for DMA end of transmission event. This avoids polling the
DMA_DESC_OWN bit in the descriptors.
Improves reliability and performance of the ethernet peripheral.
Tested on CoapServer sample, Dumb HTTP server, telnet sample.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Passing driver's data to k_thread is sufficient for mcux.
On enc424j600, however, the device pointer is needed and thus is wrapped
into its data. But there seems to be a possible optimisation: all local
spi related function in fact only needs the device's data (context) and
so changing all spi related function to take the context would remove
the need to wrap the device pointer into its data.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a working code, but it's harder to read. And for some reason
makes some semantic patches of coccinelle running forever.
So refactoring it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sleep minimum time in RX when gPTP is enabled. Typically we
receive constant stream of gPTP protocol data so no need to
wait very long in that case and cause timeouts.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that native_posix Ethernet driver is claiming to support
VLAN when the VLAN functionality is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add gPTP multiport support to native_posix Ethernet driver.
This means that the driver is able to create more than one
network interface and enable gPTP to each of them. This requires
that net-tools is updated as it contains configuration file
for network interfaces in host side.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
